Your cart is empty.
Your cart is empty.4.4 out of 5 stars
- #62,924 in Patio, Lawn & Garden (See Top 100 in Patio, Lawn & Garden)
- #66 in Fire Pit & Outdoor Fireplace Parts
Specifications
Item Model Number: 1050267
Installation: Drop-in
Material: SUS304, 1mm thickness
Drill Hole Diameter: Φ3 mm/0.12"
Number of Drill Holes: 42
Installation Size: Φ18"/Φ457.2 mm
Maximum Heat Output (BTU): 150,000
Applicable Gas Types: Propane, Natural Gas
Net Weight: 6.88 lb/3.12 kg
Product Dimensions (Dia. x H): Φ18" × 2.44"/Φ457.2 mm × 62 mm
Package Content
1 x Fire Pit Burner
1 x Threaded Connector
1 x Pressure Relief Valve
1 x Air Mixer Valve
1 x Extended Connection Hose
1 x Propane Regulator Hose
1 x Turning Key Valve
1 x Threaded Connector
1 x Sealing Tape
1 x Key Valve
1 x Gas Igniter
1 x Grounding Wire
1 x Ignition box
G.W.
Reviewed in the United States on January 7, 2025
Heavy gage, stainless steel, quality materials and construction. Not a piece of punched out tin that comes with even high priced fire pits. My fire pit, new, was $2000 and is a beautiful, well built piece of our yard furniture. Yet the pit itself corroded and rusted out within 5-years due to cheap materials and bad design to prevent water getting into the pit and the control components below. I rebuilt the entire internals to the pit and this insert amazed me by its robust material selection and construction. Great gas distribution, large feed tube that results in a balanced flame with plenty of heat output. Well worth the longer than usual wait for delivery. It was well packed, arrived without issue and dropped into the opening perfectly.
Silvs9
Reviewed in the United States on January 4, 2025
Great burner but should come with drop in tray.
Cliff Craig
Reviewed in Canada on January 31, 2025
Well made, very nice product, looks great.
michael e hornaday II
Reviewed in the United States on January 17, 2025
Buy a 0 to 20 regulator for this product when hooking up to a propane tank. You can blow Flames 6 ft in the air.
Marcos
Reviewed in the United States on February 2, 2024
The item was well priced I was able to replace the larger round burner with this one. I had to modify my base so the screw holes would fit. works well
Bob Van Epps
Reviewed in the United States on February 16, 2024
I purchased this kit to upgrade the burner in an old propane fire pit. Wow! What a difference. This burner puts out 30,000 btu more than the one it replaced. The flames are well dispersed across the fire pit and put out a lot more heat.There are a couple criticisms that I can pass on, however. The "manual" and installation instructions are very generic, with much of the information not applying to the specific unit that I purchased. Some of the parts, especially the mounting plate for the valve and igniter had to be significantly modified in order to work.The installer will need tools to cut and drill the stainless steel plate. Also there are no included instructions as to where to place the igniter. I guessed wrong. As a result, the igniter takes a few seconds to work. THIS SITUATION LEADS TO AN IMPORTANT WARNING!Because the igniter does not work instantly, excess propane often "pools" under the burner and then lights EXPLOSIVELY! I was not expecting this and was positioned too close to the fire pit when the explosion occurred, singing my eyebrows and hair. I suffered no permanent injury and should have been more careful.Users should take care to only open the valve slightly when using the provided igniter. Until I figure out the safest way to use the electric igniter, I may just use a propane fire stick that allows me to start the burner from a safer distance.While I recommend that users take appropriate care when installing and lighting this burner, I am very happy with the product as my overall rating confirms. I highly recommend that the manufacturer rewrite their installation instructions to be more complete and specific to this particular product. While I take full responsibility for the singed hair, a little warning about the potentially explosive ignition would have been appreciated.
Anotherday
Reviewed in the United States on December 22, 2024
Bought this for a worn out firepit where pan had rusted through. Was a little larger than opening but was able to cut ring welded in and fit perfect. Nice stainless pan and should last longer this time. Flame out is nice. Happy with product and price.
nugentrocks
Reviewed in the United States on October 28, 2024
I purchased this to upgrade my fire ring, which had a 60,000 BTU rating. This was supposed to have a 150,000 BTU rating, but there wasn't any real difference between my original 60,000 ring and this one. The only difference between the two was this one had a larger circumference, which didn't make any difference. I am not sure how it was determined to have such a high rating, but I can tell you that it didn't exceed 60,000 BTUs. I have another unit that has a 150,000 BTU rating and this unit didn't even come close to the output of my unit. Do not buy unless you just want something larger in size. Otherwise, you'll be disappointed. I tossed this one out and installed a different ring that was accurate relative to it's BTU rating. I would have returned this one, but it had already been installed and was used, albeit for a short period of time.
A.P.
Reviewed in the United States on December 3, 2023
Liked the pan and burner very much. Seems well built and fit our existing firepit (was replacing a rusted out unit). Was disappointed that it did not come with the filler plate for the opening to install the spark igniter and safety thermocouple head. Made my own, but would have been great to have one come with the burner and pan.
Recommended Products
