Your cart is empty.
Your cart is empty.Regulate your RV's water pressure with the Valterra Lead-Free Brass Water Regulator! The adapter regulates incoming water pressure to 40-50 psi, the ideal pressure for your needs. The water regulator attaches to the campground water spigot and reduces the water pressure that feeds through the water hose into the RV. It protects both the hose and the RV from high pressure and prevents pipes from bursting. With a lead-free brass construction, you can be confident in the safety and quality of your attachment water regulator. The Valterra Lead-Free Brass Water Regulator conforms with federal and state laws for drinking water fixtures, making it the ideal addition to your RV.
Jonathan
Reviewed in the United States on January 6, 2025
Great item and it was good price
Jonathan
Reviewed in the United States on January 6, 2025
Great item and it was good price
Robert T Barnard
Reviewed in the United States on September 6, 2024
Satisfied
Robert T Barnard
Reviewed in the United States on September 6, 2024
Satisfied
stephen
Reviewed in the United States on August 28, 2024
This was a different color than my old one but the same pressure ratting. Hooked right up and has been working perfectly all summer.
stephen
Reviewed in the United States on August 28, 2024
This was a different color than my old one but the same pressure ratting. Hooked right up and has been working perfectly all summer.
Peggy
Reviewed in the United States on July 27, 2024
The metal is sturdy, the installation easy but use plumbing tape, it fit the faucet so I can’t complain about iit’s workability. I did buy another one that hat a gauge for the reason that it felt as if at certain times of the day the water pressure would be low. Of course buying the one with the gauge proved I was incorrect in my estimation of the water pressure but I’m happy I bought the one with the gauge. My advice is to know yourself when choosing which one to get.
Peggy
Reviewed in the United States on July 27, 2024
The metal is sturdy, the installation easy but use plumbing tape, it fit the faucet so I can’t complain about iit’s workability. I did buy another one that hat a gauge for the reason that it felt as if at certain times of the day the water pressure would be low. Of course buying the one with the gauge proved I was incorrect in my estimation of the water pressure but I’m happy I bought the one with the gauge. My advice is to know yourself when choosing which one to get.
WJFox
Reviewed in the United States on June 13, 2024
Does the job and takes away any worry about too much pressure.
WJFox
Reviewed in the United States on June 13, 2024
Does the job and takes away any worry about too much pressure.
Rodney Krassow
Reviewed in the United States on December 7, 2024
Great quality, good price.
Rodney Krassow
Reviewed in the United States on December 7, 2024
Great quality, good price.
Heidi L
Reviewed in the United States on October 19, 2024
Sturdy. Worked as should. Would order again
Heidi L
Reviewed in the United States on October 19, 2024
Sturdy. Worked as should. Would order again
Ginette
Reviewed in Canada on October 24, 2023
Cadeau de Noel pour mon frère et c'est a sa demande
Ginette
Reviewed in Canada on October 24, 2023
Cadeau de Noel pour mon frère et c'est a sa demande
Camper
Reviewed in Canada on September 1, 2022
Tous les campings n'ont pas la même pression d'eau. Ce régulateur de pression protège contre les risques de voir votre tubulure intérieure subir une pression excessive.
Camper
Reviewed in Canada on September 1, 2022
Tous les campings n'ont pas la même pression d'eau. Ce régulateur de pression protège contre les risques de voir votre tubulure intérieure subir une pression excessive.
Customer
Reviewed in Canada on August 7, 2020
works great, so far have not tried it at a higher pressure to see if it reduces it.
Customer
Reviewed in Canada on August 7, 2020
works great, so far have not tried it at a higher pressure to see if it reduces it.
Alfredo
Reviewed in Canada on July 20, 2020
merci, thanks
Alfredo
Reviewed in Canada on July 20, 2020
merci, thanks
Dana
Reviewed in Canada on July 16, 2020
Do not buy says good for drinking water but package it comes in says causes cancer
Dana
Reviewed in Canada on July 16, 2020
Do not buy says good for drinking water but package it comes in says causes cancer
Greg R.
Reviewed in the United States on November 17, 2014
Valterra A01-1120 Brass Water Regulator for use on our 10 year old Maytag Neptune front loading wash machine. Our water pressure in our home is about 94 Psi. The power went off the other day and I heard water dripping into the washer. If power is removed and the solenoid operated input water valve is questionable then it may leak. The high water pressure didn’t help. This has happened before but this time it was bad. In order to get the accumulated water out of the machine I ran a spin cycle and walked away. 30 minutes later I returned, the floor in the laundry room and kitchen were covered with water (thank goodness for a shop-vac and a spin mop). The input water valve must have failed completely and the machine filled with water, when the door unlocked itself it opened from the large amount of water and it poured out. I replaced the water valve ‘Whirlpool 22003834 Water Valve Thermistor’ (thank goodness for Amazon Prime 2 day shipping). To be safe I installed two of these Valterra A01-1120VP 40-50 PSI Lead Free Water Regulators (Amazon Prime again). I had to remove the orange plastic hand tightening ring (interfered with the valve handle) and reverse the strainer/seal (as another reviewer mentioned). I measured the pressure from the regulator and it was 40 Psi hot & cold I have run about 10 loads of laundry using warm/cold setting and so far everything works very well. There is a nylon or similar material part in the brass Valterra reducer but I don’t think it will melt or deform with hot water. The stainless steel unit Valterra A01-1114VP High Flow Stainless Steel Water Regulator (from Amazon) does not seem to have any similar nylon/plastic parts in it so I have one of these on hand just in case. The machine is actually working much better with the lower water pressure. I included some pictures.
Greg R.
Reviewed in the United States on November 17, 2014
Valterra A01-1120 Brass Water Regulator for use on our 10 year old Maytag Neptune front loading wash machine. Our water pressure in our home is about 94 Psi. The power went off the other day and I heard water dripping into the washer. If power is removed and the solenoid operated input water valve is questionable then it may leak. The high water pressure didn’t help. This has happened before but this time it was bad. In order to get the accumulated water out of the machine I ran a spin cycle and walked away. 30 minutes later I returned, the floor in the laundry room and kitchen were covered with water (thank goodness for a shop-vac and a spin mop). The input water valve must have failed completely and the machine filled with water, when the door unlocked itself it opened from the large amount of water and it poured out. I replaced the water valve ‘Whirlpool 22003834 Water Valve Thermistor’ (thank goodness for Amazon Prime 2 day shipping). To be safe I installed two of these Valterra A01-1120VP 40-50 PSI Lead Free Water Regulators (Amazon Prime again). I had to remove the orange plastic hand tightening ring (interfered with the valve handle) and reverse the strainer/seal (as another reviewer mentioned). I measured the pressure from the regulator and it was 40 Psi hot & cold I have run about 10 loads of laundry using warm/cold setting and so far everything works very well. There is a nylon or similar material part in the brass Valterra reducer but I don’t think it will melt or deform with hot water. The stainless steel unit Valterra A01-1114VP High Flow Stainless Steel Water Regulator (from Amazon) does not seem to have any similar nylon/plastic parts in it so I have one of these on hand just in case. The machine is actually working much better with the lower water pressure. I included some pictures.
Recommended Products
$19.49
$ 9 .99 $9.99