Shopping Cart

Your cart is empty.

Your cart is empty.

Valterra 7201 ABS Gate Valve, Black, 2' Slip

Free shipping on orders over $29.99

$18.72

$ 7 .99 $7.99

In Stock

About this item

  • APPLICATIONS: Ideal for quick opening and shut off in low vacuum or pressure applications - Can be used with air or clean/gray/waste water
  • KEY FEATURES: Unrestricted flow - Full port opening - Simple push/pull operation
  • SPECIFICATIONS: Maximum Pressure - 20 psi Open/40 psi Closed, Schedule 40 ABS Slip fittings
  • REPAIRS: Bolted assembly allows for replacement of valve body and gate seals - Handle simply unscrews
  • Please note: Paddle is slightly smaller than opening to ease opening/closing. Valve seal gaskets block any gaps to ensure no leaks.


This type of slide gate valve was originally designed for draining tanks and controlling shallow bodies of water like ponds and lagoons. They also can be used as shut off valves in low pressure or vacuum air lines. Please note that each valve size has an open and closed pressure rating. Because the plastic paddle can flex with flowing water they are not good for throttling water or trying to close the valve with fast moving water – thus the low mid flow cut off water pressure of 5 pounds per square inch (PSI). These slide valves are sometimes referred to as “knife or guillotine” gate valves and are a great alternative to ball valves in low pressure applications since they are full flow and quick opening. They work well with soft debris like waste but small hard debris can settle in the bottom of the valve seat/slot and prevent it from closing completely. They can easily be repaired by unbolting and replacing the gate seals or valve body. The handle simply unscrews for easy replacement – if you do so be sure not to damage the valve shaft. Extension rods and cables are available for remote actuation. The Valterra 7201 gate valve has 2" Schedule 40 female slip/hub fittings which receive 2" pipe. The black acrylonitrile butadiene styrene (ABS) body and hub fittings are resistant to corrosion and mild chemicals as are the polypropylene (PP) paddle and thermoplastic vulcanizate (TPV) seals. Its shaft is made of 304 stainless steel. Hardware is zinc plated steel. It has a maximum pressure rating in the open position of 20 PSI and 40 PSI in the closed position, a mid-flow cut off maximum pressure rating of 5 PSI, and a maximum temperature rating of 205 degrees F (96 degrees C). See Gate Valve Measurement chart for dimensions and Head Pressure chart for determining the pressure based on the height of water being held back. Please note: Paddle is slightly smaller than opening to ease opening/closing. Valve seal gaskets block any gaps to ensure no leaks.


Billy K
Reviewed in the United States on March 13, 2024
Good dumpvalve for my 70s model trailer. 2 inch pvc fit into it perfect. Just what I wanted
Billy K
Reviewed in the United States on March 13, 2024
Good dumpvalve for my 70s model trailer. 2 inch pvc fit into it perfect. Just what I wanted
Ken Boys
Reviewed in Canada on September 4, 2023
Much better price than I could find locally.
Ken Boys
Reviewed in Canada on September 4, 2023
Much better price than I could find locally.
carlos ontiveros
Reviewed in the United States on September 28, 2023
used on a truck mount tank for draining water
carlos ontiveros
Reviewed in the United States on September 28, 2023
used on a truck mount tank for draining water
Sam
Reviewed in Canada on August 9, 2023
Exactly what I needed
Sam
Reviewed in Canada on August 9, 2023
Exactly what I needed
Sir mike lafontaine
Reviewed in Canada on February 16, 2023
works good
Sir mike lafontaine
Reviewed in Canada on February 16, 2023
works good
Julie
Reviewed in the United States on August 31, 2022
Works as it should in my trailer that I rebuilt 1971 Open Road Use some ABS glue and you’re on your way No leaks Perfect
Julie
Reviewed in the United States on August 31, 2022
Works as it should in my trailer that I rebuilt 1971 Open Road Use some ABS glue and you’re on your way No leaks Perfect
Jacob Angelo
Reviewed in the United States on August 10, 2022
No leaks, works great!
Jacob Angelo
Reviewed in the United States on August 10, 2022
No leaks, works great!
Kindle Customer
Reviewed in the United States on July 6, 2020
The Valterra gate valve is good quality, easy to install, and seals are easy to replace after dependable service.
Kindle Customer
Reviewed in the United States on July 6, 2020
The Valterra gate valve is good quality, easy to install, and seals are easy to replace after dependable service.
Hunter
Reviewed in the United States on June 14, 2020
It's a solid product. Works and functions like it's supposed to. I use this as a valve for draining a 300 gallon tank. This size of it make it good for a high flow rate for filling buckets or just draining. My only problem with it that made it 4 starts is that the handle is made of PVC like the rest of the valve which makes it prone to breaking. My last one made it about a year before both ends of the handle broke. The valve still works, I just have to have something else to pull it open. All in all a good quality product from a good company.
Hunter
Reviewed in the United States on June 14, 2020
It's a solid product. Works and functions like it's supposed to. I use this as a valve for draining a 300 gallon tank. This size of it make it good for a high flow rate for filling buckets or just draining. My only problem with it that made it 4 starts is that the handle is made of PVC like the rest of the valve which makes it prone to breaking. My last one made it about a year before both ends of the handle broke. The valve still works, I just have to have something else to pull it open. All in all a good quality product from a good company.
Javier Unzueta
Reviewed in the United States on September 19, 2016
Purchased this to build a tote-along like RV effluence tank. Attached (with other connectors) to a 55 gallon barrel. Very satisfied with the end product.
Javier Unzueta
Reviewed in the United States on September 19, 2016
Purchased this to build a tote-along like RV effluence tank. Attached (with other connectors) to a 55 gallon barrel. Very satisfied with the end product.
DaveHanna
Reviewed in the United States on July 3, 2016
I bought this gate valve to replace another one of the exact same type that had started to leak. It fit perfectly and I liked the fact that it came in black to match the color of the rest of the plumbing. I had checked all the big box stores and plumbing supply houses in my local area and couldn't find anything like thus. Thank you Amazon!
DaveHanna
Reviewed in the United States on July 3, 2016
I bought this gate valve to replace another one of the exact same type that had started to leak. It fit perfectly and I liked the fact that it came in black to match the color of the rest of the plumbing. I had checked all the big box stores and plumbing supply houses in my local area and couldn't find anything like thus. Thank you Amazon!
Recommended Products

$334.17

$ 99 .00 $99.00

5.0
Select Option

$27.35

$ 13 .99 $13.99

4.3
Select Option

$6.99

$ 2 .99 $2.99

4.7
Select Option

$144.77

$ 65 .99 $65.99

4.8
Select Option

$14.68

$ 7 .99 $7.99

4.3
Select Option

$56.99

$ 25 .99 $25.99

4.8
Select Option

$20.44

$ 9 .99 $9.99

5.0
Select Option