Your cart is empty.
Your cart is empty.Product Description
Information
Reamers are with one or more cutter teeth. Holes can be with exact size and shape after the reamers' processing. Finished product can be smooth, intact and more beautiful.
Reamers can be used to process holes in small cuts based on guiding function, such as: holes with diameter tolerance in ≤IT8; holes with requirements in surface roughness (≤Rz12 generally); holes with requirements in roundness tolerance; holes with requirements in cylindricity; stepped holes (different diameter holes on the same axis); series holes (diameter holes on the same axis) with requirements in high coaxality.
Morse Taper Reamer
Alloy Tool Steel
- High hardness and durability
- Not easy to wear
Straight Flute
Straight flute tools allow chips to collect in the flutes and can make shallow cuts in most applications.
No Coatings
Designed with the base substrate without any additional coatings, good for wide ranges of applications.
Applications
- Aluminum
- Cast Iron
- Copper
- Plastic
- Wood
TSTS
Reviewed in the United States on February 6, 2025
Needed this to ream tuner holes on a bass guitar for the tuner bushings. Did the job well.
Phaedros
Reviewed in the United States on December 29, 2024
I needed to clean up a worn taper and this reamer did an excellent job. But if I had to create a new taper from scratch, I would invest in a more expensive taper pair.
Saltman
Reviewed in the United States on December 26, 2024
This unit cannot cut even some minimal burs in a tailstock. My lathe had some minor burrs caused by the previous owner placing something inappropriate. I wanted something to remove the burr and smooth the MT2. Nope. it just slide over the metal leaving zero shavings. No metal at all.Waste of money.
Jim
Reviewed in the United States on November 18, 2024
Helped clean up my inside tapers
Crazy Dave
Reviewed in the United States on November 14, 2024
Needed to Clean up an old tailstock on a vintage wood lathe. And it worked great to repurpose an old 50's Rock saw into A wood lathe.
RussB
Reviewed in the United States on August 10, 2023
Excellent product for the price. Not sure how it will hold up with heavy use but for a home shop and light use a good product
Tom Contos
Reviewed in the United States on June 26, 2023
I recut the taper in the drill press. Works great now. Simple and easy to use. Solved the problem with chuck falling out occasionally.
attaboy
Reviewed in the United States on March 11, 2022
Not marked HS, and unknown finish. Just be aware, that for "new work", you really need a two piece set, which includes a rougher. I got it for making a storage carousel for 2MT live centers, out of softer material and also very shallow depth. It will be fine for my needs, or for "cleaning" 2MT on various machines. The shank is 17/32". Happy Trails!
Recommended Products