Shopping Cart

Your cart is empty.

Your cart is empty.

USB GPS Module GLONASS Beidou GPS Dongle Built-in Ceramic Antenna, Better Than VK-162 VK-172

Free shipping on orders over $29.99

$16.90

$ 6 .99 $6.99

In Stock

About this item

  • This GPS module can work with Windows XP, 7, 8 or 10
  • Work for Raspberry pi and linux no need driver
  • Plugged it into linux machine, detected as ttyACM0. No additional drivers or configuration required
  • The default output is the product GPS protocol data. You can test the software or serial commands to modify switch PS / GLONASS protocol data



Product Description


USB GPS Module Antenna GLONASSUBX-M8030 Beidou

USB GPS Module Antenna
U Center

The software is U-center, you need install driver before use the software

  • ✔Android driver link: https(:)//tinyurl (dot) com/ublox-android-driver
  • ✔U-center Windows Link: https(:)//www(dot)u-blox(dot)com/en/product/u-center-windows
  • ✔How to work with raspberry pi video: https(:)//youtu(dot)be/A1zmhxcUOxw
  • ✔How to work on Mac: https(:)//tinyurl(dot)com/gps-works-on-mac
  • ✔video link 1: https(:)//youtu(dot)be/_w8iMzh_LkY
  • ✔video link 2: https(:)//www(dot)youtube(dot)com/watch?v=Oag9qYuhMGg
  • ✔User guide video link 3: https(:)//youtu(dot)be/30qJsynTceY
  • Other documents or tutorial con tact us.

Description

  • Chip: UBX-M8130
  • Product comes with high sensitivity ceramic antenna; with IPEX antenna socket, you can use external active antenna too
  • Supports GPS+GLONASS (default); GPS+Beidou; GLONASS+ BeiDou multiple modes Built-in LNA signal amplifier
  • Built-in Flash, free configuration product baud rate, output statement, output rate, second pulse and other parameters
  • Built-in TCXO Crystal and Farad Capacitors for Faster Hot Start
  • 1-10Hz update rate
  • Baud rate: 4800,9600,19200,38400,57600,112500bps
  • Frequency: L1, 1575.42MHz
  • Channel: 56
  • Tracking: -164dBm Capture: -159dBm
  • Cold start: average 26 seconds
  • Cold Start -147dBm
  • Warm start: Average 24 seconds
  • Hot start: average 1 second

Supports GPS+GLONASS (default); GPS+Beidou; GLONASS+ BeiDou multiple modes Built-in LNA signal amplifier

usb-gps-dongle

IPEX Antenna Socket

Built in antenna, but it has a IPEX antenna socket too, you can use external active antenna.

USB GPS Module Antenna

Size of USB GPS Module Antenna

28 x 48 x 8.5 mm

USB GPS Module Antenna

Ceramic Antenna

Comes with high sensitivity ceramic antenna, this active antenna need to face to the sky when you use it.

USB GPS Module Antenna

Accuracy

  • Timepulse signal: RMS 30 ns
  • The maximum height: 50000 meters
  • Speed: 500 m/s
  • Acceleration: ≦4G
  • Update frequency: 1-10 Hz
  • Operating Temperature: -40°C to 85°C
  • Storage temperature: -40°C to 85°C

DP
Reviewed in the United States on March 11, 2024
While this GPS may work fine for many applications, it is not so good when building a Stratux unit. It's electronics are not shielded too well or maybe the antenna is weak. One minute it works and then the next it looses all satellites. You need reliability when flying a plane. So for Stratux builders, get a unit with a factory built u-blox labeled unit vs this.
Adam
Reviewed in the United States on December 9, 2024
As advertised, using it on a pizero w. All i had to do was activate it in my config, and walk around outside for like 15 minutes but one it got a fix it was good to go!
RonV
Reviewed in the United States on December 14, 2024
If you want to use this for ntpdchrony either it does not provide pps via USB or the current version of gpsd is unable to find the USB pps. this device can provide GPS information using cgps, it just does not provide the PPS single over USB.Works fine finding the GPS satellites using an external antenna. I don't recommend if this if you want to use it for GPS time sync for NTP & Chrony.
Rick
Reviewed in the United States on April 25, 2024
this is absolute GARBAGE. Dont purchase this.. I let it sit outside for almost 12 hours with a clear view of the sky and it will not get a fix on a single satellite.
Karl
Reviewed in the United States on July 12, 2023
I've gotten this up and running on Windows 11 with no problems. I intend on using it with a Rasperry Pi project which it should work well for. It's a good value for what it does. Bear in mind it doesn't include any documentation so you'll have to go to the site itself to get that.
VY2HF
Reviewed in Canada on December 21, 2023
Having owned a different model, one that I struggled with getting to recognize on my computer, I was pleasantly surprised with this unit. It connected right away, and the software download instructions were very clear. I had it going in a matter of minutes, and it acquired the satellites very quickly.As a ham radio operator, I require a precise time signal, as delivered by GPS, to coordinate my digital transmissions for advanced modes like FT8. This GPS unit is exactly what I needed to be able to have an accurate time standard even when away from an Internet connection.Now, even when in the field, my computer's real time clock will be prefectly synced to a true time standard. For the price, this can't be beat.
Ghost Rider
Reviewed in the United States on October 28, 2023
Awesome way to include Geo location functionality into my Pi projects! I used to expect datasheets and other docs to come with these modules; but they never do! So, as with other modules, happy searching for documents! However, you'll find it between search and AI it is not hard to get going!Great so far!! Works with windows and receives GPS info like a champ!!
Karen M
Reviewed in the United States on April 27, 2023
Running it on Win10pro with Opencpn and it is quick. Acquired signal very quick with a status led built into the unit helps verify it’s on and receiving.
user
Reviewed in the United States on November 17, 2020
I used this with a raspberry pi and it works great. Would recommend this if you need gps with a raspberry pi
Recommended Products