Shopping Cart

Your cart is empty.

Your cart is empty.

USB 3.0 90 Degree Motherboard Adapter 19 Pin/20 Pin Male to Female Extension Adapter L Turn Right Angle Socket for Desktop Motherboard (Up Angle PH19A)

Free shipping on orders over $29.99

$7.98

$ 3 .99 $3.99

In Stock

About this item

  • Good Solution:This 90-degree L-Turn Up Angled (PH19A) adapter provids a convenient solution for changing the installing direction of USB 3.0 20 pin/19 pin cables.By allowing the USB 3.0 20 pin/19 pin cable to be installed at a 90 degree angle, you are no longer need to wrap or fold the cable up and back over the motherboard and reduce the amount of cables needed in front of the motherboard tray.
  • Up Angled(PH19A):We have two types of angles: tilt up 90 degrees and tilt down 90 degrees. This tilt up 90 degrees, USB3.0 (19/20pin) male to female extension adapter,type is PH19A.So please check your computer motherboard carefully (see the picture for details).
  • High Performance:This USB 3.0 90 Degree Motherboard Adapter ,Super-speed up to 5Gbps 10× faster than USB 2.0 Version.Support two-way data transmission at the same time. And lossless transmission.
  • Wide Compatibility:This USB 3.0 19 Pin/20 Pin Male to Female Extension Adapter Motherboard Internal Header is standard USB 3.0 20 pin connector, so it will work with all of USB3.0 19 pin/20 pin ports on the motherboard.
  • High quality:The appearance has been upgraded,L Turn Right Angle Socket for Desktop Motherboard with a closed shell to prevent dust.Made of high-quality ABS material and electronic components.Small size and light weight.Strong and Enduring,can be carried around.



Product Description

SHANFEILU USB 3.0 90 Degree Motherboard Adapter 19 Pin/20 Pin Male to Female Extension Adapter L Turn Right Angle Socket for Desktop Motherboard (Up Angle PH19A)

PH19A

PH19A

This is PH19A.

NOTE:Please confirm the direction of "Blocking Corner" of the USB port on the motherboard before purchasing.

for desktop motherboard

for desktop motherboard

This USB 3.0 19pin/20 pin 90 degree adapter is suitable for desktop motherboard.

Note:

1 The adapter was only designed for USB 3.0 20 pin/19 pin port to improve the connection between your motherboard and USB 3.0 20 pin cable.

2 Must install the adapter step by step to avoid shorting pins and motherboard damage.

3 Please remove power cable and wait 10 seconds before installation.

4 Note the standard slot design,do not try to remove once plugged into motherboard.If you tried to remove it,removeed by professionals to prevent damage the motherboard.

5 How to select type,first please check your computer motherboard carefully then see the picture for details.

L Turn Right Angle

L Turn Right Angle

This L Turn Right Angle socket motherboard internal header can solve the problem of accidentally breaking the motherboard pin by the 19P cable that is inserted in the motherboard.

Up Angled Type PH19A

Up Angled Type PH19A

Packing Included:

1 pcs USB 3.0 20pin /19 Pin Male to Female Adapter(Up Angled Type PH19A).


Roy Q
Reviewed in the United States on February 7, 2025
I didn’t even realize these existed until recently. It made a huge improvement to the looks of my build.
Manuel
Reviewed in the United States on February 13, 2025
Wrong angle for sure!!!
tyler haught
Reviewed in the United States on August 4, 2024
Used in a new build to help hide the cable. Works and looks great.
Steven Kelly
Reviewed in Canada on May 7, 2024
Looks great paired with other ninety degree connectors for motherboard and rgb 24-pin
Craig Rutan
Reviewed in the United States on March 1, 2024
Bought because my gpu would not install over the straight plug on the mobo, this routes it 90 degrees just a hairs width away, which allowed me to keep my front panel usb, and freed up a pcie slot previously covered by gpu!
James Dawson
Reviewed in the United Kingdom on December 15, 2024
Exactly what I needed to clear a radiator.
The Junkman 2008
Reviewed in the United States on November 22, 2024
Very clean and study made. Gets rid of having your monster power cable sticking all up in the air.
Customer
Reviewed in the United States on January 31, 2024
I've tried a few different manufactured styles of these 90 degree USB 3.0 adapters and these are among the highest quality. Just be careful when unplugging, these adapters fit super tight and snug, and will require some force to get off. So, if you're at an awkward angle or tight space, be sure to pull out straight or try to wiggle it off gently to not damage or bend any pins.
Dave
Reviewed in the United States on September 22, 2023
Pretty straightforward product. Functions exactly as described. Eliminates the strain on the USB 3.0 front panel cable and makes it easier to clean up cable routing. Make sure to check the placement of the tab on your motherboard's USB 3.0 header since there are two versions of this 90 Degree Adapter that will accommodate both alignments.Honestly a little costly relative to its impact, but you're probably already in too deep if you're actively seeking out options to clean up your cabling.
Draco
Reviewed in the United States on September 21, 2023
Heads up, this points to the LEFT when installed. Completely wrong orientation that most ATX mobos will have their USB 3.0 sockets. This is useless in that regard. This should be mentioned in the description.
Massimo Ciccio'
Reviewed in Italy on December 6, 2023
Ho recentemente acquistato l'adattatore per scheda madre USB 3.0 ruotato di 90 gradi della Shanfeilu, un accessorio progettato per offrire maggiore flessibilità nelle connessioni all'interno del case del mio desktop. Dopo un'attenta valutazione, ecco cosa ho notato.Iniziamo con i pregi. La rotazione a L di questo adattatore offre una soluzione intelligente per gestire gli spazi ristretti all'interno del case. La possibilità di collegare i cavi ad angolo retto è un vantaggio notevole, consentendo una maggiore flessibilità nella gestione dei cavi e facilitando l'accesso a porte USB vicine. La costruzione solida suggerisce una durata nel tempo e sembra essere in grado di sopportare l'usura quotidiana.Tuttavia, non tutto è perfetto. Un difetto evidente è la limitata compatibilità con alcuni dispositivi USB 3.0, che potrebbe causare difficoltà nei collegamenti. Inoltre, la rotazione a 90 gradi potrebbe non essere adatta a tutte le configurazioni di case, riducendo così la versatilità del prodotto. La mancanza di istruzioni dettagliate potrebbe complicare l'installazione per gli utenti meno esperti.Un altro aspetto che ho notato è che, sebbene la rotazione a L sia un punto di forza, potrebbe risultare difficile accedere al pulsante di rilascio della spina USB, specialmente se si tratta di un dispositivo di dimensioni più grandi.In conclusione, l'adattatore per scheda madre USB 3.0 ruotato di 90 gradi della Shanfeilu offre una soluzione interessante per gestire i cavi all'interno del case, ma presenta alcune limitazioni che potrebbero influenzare la sua adattabilità. Se avete spazi ristretti e la vostra configurazione lo permette, potrebbe essere una scelta valida, ma consiglio una valutazione attenta della compatibilità con i vostri dispositivi prima dell'acquisto.
sprite
Reviewed in Canada on November 27, 2023
the angle at which my case forced me to plug in the header was... honestly a bit anxiety-inducing, especially considering how stiff that cable is. it looked like it just wanted to pop right off. luckily, this handy little adapter was the perfect thing for taking all of that pressure off the plug, and now i don't have to worry as much about the longevity of my stuff :)
Filippo
Reviewed in Italy on November 2, 2023
Il cavo USB3.0 è uno dei cavi più fastidiosi che ci siamo all'interno di un case a causa dell'attacco frontale rispetto alla scheda madre, della sua rigidezza e del connettore grande.Nel mio case era uno dei due cavi volanti rimasti (l'altro è scheda video), quindi appena ho visto l'adattatore l'ho voluto subito, ed avrebbe funzionato perfettamente se solamente... non ci fosse stato il case di mezzo.. Niente, su Case Razer Tomahawk ATX con motherboard ATX (nel mio caso un'Aorus X570) non va proprio, alla femmina manca qualche mm di lunghezza per sporgere di più dalla scheda madre e superare l'ostacolo (vedi foto).Ad ogni modo, non per questo posso dare un parere negativo, in realtà il prodotto è valido e ben fatto (occhio a scegliere quello giusto con il dentino sopra o sotto) e sicuramente lo userò il momento che cambierò case o computer.Non vedo l'ora di togliermi quel cavo USB di mezzo!Se avete spazio sotto la motherboard, super consigliato!