Your cart is empty.
Your cart is empty.Product Description
SHANFEILU USB 3.0 90 Degree Motherboard Adapter 19 Pin/20 Pin Male to Female Extension Adapter L Turn Right Angle Socket for Desktop Motherboard (Down Angle PH19B)
PH19B
This is PH19B.
NOTE:Please confirm the direction of "Blocking Corner" of the USB port on the motherboard before purchasing.
for desktop motherboard
This USB 3.0 19pin/20 pin 90 degree adapter is suitable for desktop motherboard
Note:
1 The adapter was only designed for USB 3.0 20 pin/19 pin port to improve the connection between your motherboard and USB 3.0 20 pin cable.
2 Must install the adapter step by step to avoid shorting pins and motherboard damage.
3 Please remove power cable and wait 10 seconds before installation.
4 Note the standard slot design,do not try to remove once plugged into motherboard.If you tried to remove it,removeed by professionals to prevent damage the motherboard.
5 How to select type,first please check your computer motherboard carefully then see the picture for details.
L Turn Right Angle
This L Turn Right Angle socket motherboard internal header can solve the problem of accidentally breaking the motherboard pin by the 19P cable that is inserted in the motherboard.
Down Angle Type PH19B
Packing Included:
1 pcs USB 3.0 20pin /19 Pin Male to Female Adapter(Down Angle Type PH19B).
Eduardo
Reviewed in Mexico on March 5, 2025
si
Zack
Reviewed in the United States on January 3, 2025
Well built but didn’t fit my needs (my own fault)
Jason
Reviewed in the United States on January 26, 2025
Works great to minimize cable bends and better cable management
Nate Bee
Reviewed in Canada on January 1, 2025
These are great for angling a cable inside the PC to connect to the motherboardIt’s worked reliably for over a year now and I’ve not had to reconnect it at all or had any issues with my motherboard so that’s reassuring while using an adapter.Connected nice and tight and was not difficult to push in
Christoffer
Reviewed in Germany on September 4, 2024
Bitte achtet darauf wie euer USB Slot auf dem Mainboard ausgerichtet ist, denn bei meinem ASUS ROG STRIX B760-F Mainboard zeigt der Adapter in Richtung CPU
Dawid Sidlo
Reviewed in the United Kingdom on February 9, 2024
Work super on my B760 mobo.
alatncoa
Reviewed in the United States on December 25, 2024
Perfect fit! get rid of the annoying bend in the wires.
BGnATC
Reviewed in the United States on December 1, 2024
I'm using this adapter with a Gigabyte B660I mini-ITX motherboard paired with a large CPU air cooler. Previously, the USB3 cable was interfering with placement of the CPU cooler fans and this adapter works perfectly to reposition that cable so as to get it out of the way. The black color blends in nicely with a blackout color theme and cables, and seems well made. I have no complaints.
santiOli
Reviewed in Spain on April 23, 2024
Con el accesorio cuesta menos poner el cable usb que es bastante rigido y los pins del conector de la placa bastante endebles
Demonik
Reviewed in the United States on September 1, 2023
Building a tight ITX build, needed someway to get the USB3 front cables to come in at right angles so I could hide the cable from sight. This was perfect for the job. Construction is good. It easily slipped into the motherboard USB3 header and stay tight. The Case cable slots in nice and easy too, and both USB3 ports are working at full USB3.2 Gen1 speeds.
J. Powers
Reviewed in the United States on March 4, 2023
I installed an Aorus B550m Pro-P motherboard in an Asus AP201 case - great combo but because the USB header is at the bottom of the board and the case's internal USB cable was so thick it made installing fans at the bottom of the case unworkable, putting way too much strain on the header.After researching I bought this adapter. This was exactly what I needed, it completely changes the routing of the internal USB cable. Instead of making a turn along the bottom of the case I was able to use a different pass-through and easily plug down into the adapter. This adapter was a life saver and has been working perfectly.
Joseph
Reviewed in the United States on November 13, 2023
Had the Fractal Meshify C case in my original build (MSI Z270 SLI Plus) and where the USB 3 connection was on that mobo was higher up compared to my new mobo (E vs SE). Because of how stiff the case connector is you couldn't have it go fully in and have the mobo fully seated on the case. This fixed it and now I don't have an issue, and the case IO is still working. I'll update this if I run into an issue but I don't think I will.
David Spearing
Reviewed in the United States on October 13, 2023
Working as intended. Much better than twisting and contorting the cable to my MB.
Recommended Products