Your cart is empty.
Your cart is empty.Product Description
No programming required
Use existing cut key blade and transponder chip
Case only, no electronics, screw driver to assist assembly
Muhammad Saad
Reviewed in the United States on February 4, 2025
I see people complaining about the key not fitting in the case bcz the key is not meant to be just placed between the covers. It has a very well thought sliding mechanism for the key to fit in the shell case that makes it 2x stronger. The plastic is very durable, making it a great long-term replacement. It saved me from buying an expensive new key fob, and the installation was quick and hassle-free. Highly recommended for anyone looking for a budget-friendly and reliable solution for a worn-out key fob shell!
Jim Burleson
Reviewed in the United States on February 2, 2025
Easy to install fob controller and key in new case and solve my issue with stripped screw on original key for 2013 CRV. Original was becoming intermittent even after replacing battery and trying to get better contact with battery. This replacement case is working great and much cheaper than replacing the key.
Jen
Reviewed in the United States on February 15, 2025
Works perfectly! Super easy comes with everything you need!
donna
Reviewed in the United States on January 28, 2025
I am a 72 year old with a 2010 Honda Insight. The key fob casing broke and I thought I was going to need an expensive trip to a dealer. Not so! I bought this item and I was able to swap out the contents of the old fob into this new one. I did need a little help pulling the key all the way through the new key holder. I couldn’t snap the new fob closed because it wasn’t pushed in all the way. Got some help with that and it fit like a glove. I highly recommend this product!
Richard Hudgins
Reviewed in the United States on January 2, 2025
This product works great if you still have the screw from your old key fob. It comes with a new screw, but it is not the right screw to work with the key. My old screw was broken or missing so I had to order a new screw from somewhere else to get this to work. I don’t understand why they don’t include the right screw with it.
Alex P.
Reviewed in the United States on January 12, 2025
My old key case cracked and broke and I was walking around with my trashy taped up key. Ordered this shell as I needed a replacement.The installation took 5-10 minutes and mostly took that long because I had to watch some tutorials. I did have trouble figuring out how to reassemble the fob back together. The key portion does need to be SLID into the non button side (sliding from the top down) then the 2 halves can be snapped back in place. My 2008 Honda CRV key fit perfectly. Some reviewers mentioned that the key holes don't entirely line up and they had to drill or enlarge the whole for it to line up. I did not have to do that at least with my fob. However, I initially attempted to re-use the OEM screw that came in my old fob but it was slightly thicker than the one provided and could not be used. I did end up using the screw that came in the kit and it did fit, however once I applied more pressure to tighten the screw (which you do need to put some downward pressure) the screw began to strip. I had to stop. The screw did go in well enough that it was sturdy and secure but it sticks out just a hair and isn't as flush as the original. I could purchase a silicone cover to 1. protect the key fob and 2. bring that smoothness back so it's not a deal breakerAll in all, it's not a 100% perfect fit but it is a great fit for a Honda CRV and for $5.50 it is absolutely worth it. Going to a dealer or anywhere else would have been way more costly and honestly not needed. The only con I had was the screw quality, therefore 4 stars.
José Daniel Mendez
Reviewed in Mexico on August 11, 2024
Funciona a la perfección! Se ve de material duradero.
Ariel
Reviewed in Canada on July 12, 2024
My original key fob for my ‘05 Honda Pilot was starting to break down everytime I would start my car these past few months so I couldn’t even keep it on my lanyard bcuz it has a few heavy keychains on it. and the plastic around the actual car key was getting flimsy so I had to make sure my key is straight and in place before starting. Finally decided to just buy this quick fix set and it was hard to get them to clip on together but I ended up getting it after a few tries. The screw fits and everything and it feels like it’ll last me for a while !
Edwin S.
Reviewed in the United States on June 8, 2024
The media could not be loaded.
nbear
Reviewed in Australia on February 16, 2024
We have tried many key cases for our Honda CRV key and this is the only one that fitted firmly and perfectly. Will buy again, if need be.
ni3d4888
Reviewed in the United States on December 31, 2024
These fit perfectly for my 2010 Honda Civic four-door sedan. It was easy to switch out from my old broken keycase. Apart from the missing Honda emblem, there is no way to tell if these are original or duplicate. I also like the small plastic supporting piece at the base of the key. Hope it helps with endurance of the case. Took this opportunity to also switch out the batteries so I hope my key is good to go for few more years.
Abraham Becerril
Reviewed in Mexico on November 12, 2024
Me gustó porque incluye hasta el desarmador para poder hacer el cambio rápido. Es muy fácil. En mi caso tengo una honda CRV 2011 y por el uso la carcasa plástica de la llave se rompió. Me fue muy útil este producto.
Francisco Servando Aguirre Tostado
Reviewed in Mexico on February 11, 2022
Tengo una Honda CR-V 2011 y he cambiado la llave en varias ocasiones. El costo en cerrajerías y agencia Honda es muy alto y al fin de cuentas no dura. Esta opción es mucho más económica y muy fácil de reemplazar, toma sólo 3 minutos y no requieres herramientas adicionales al desatornillador incluido. La llave ya reparada se siente robusta y cumple su función. Ya pedí otra para reparar el repuesto también. Muy recomendable.
Recommended Products