Your cart is empty.
Your cart is empty.Product Description
Something You Must Know:
- In cold temperatures, the crank ventilation system generates more moisture, which may pose a risk of freezing.
- When the outside temperature is near freezing, the oil catch can be cleaned weekly to prevent the crank ventilation system from freezing and damaging the engine seals.
- When the temperature reaches a freezing point and below, we recommend disconnecting the inlet and returning water lines and installing the original PCV hose between the inlet pipe and the PCV valve assembly.
Featured Configuration
- Color: Red/Blue/Black/Silver
- Thread Size: M16*1.5
- 400ML
- Aluminum Bracket
- 6mm 8mm 10mm Adapters
- Updated NBR fuel line(Length:1M)
- Universal for most cars, as long as have enough space.
The baffle could cool hot oil vapor and turn into liquid, catch the oil and vapor.Can better protect the engine.
Stainless steel wool： The effect of filtering oil is improved.Bracket for Location：Allows you to fix the oil can at the proper location.Seal tape：Prevents oil leakage
Install the breather filter as a vent system for pre-pcv cars.Can keep the engine clean, increase horsepower and extend engine life.
Our oil catch can is made of high-quality aluminum and is anodized, which is not only high in strength, durable, but also has a beautiful appearance.
Our research team found that many buyers of our competitors complained that cheap silicone hoses were useless, so we updated the fuel hose to NBR.
An oil catch can is a device that is fitted into the cam/crank case ventilation system on a car.Installing an oil catch can aims to reduce the amount of oil vapors re-circulated into the intake of the engine.
Saeed
Reviewed in Saudi Arabia on September 8, 2024
الصمامات المرفقه مع المنتج ليست ذي جوده عاليه
لم يصلني المنتج
Reviewed in Saudi Arabia on September 10, 2024
لم يصلني المنتج
Erik Antonson
Reviewed in the United States on July 17, 2024
Have used on 2016 Ford Explorer Sport and 2011 2500HD, works well on both.
Saud Hassanin
Reviewed in Saudi Arabia on June 20, 2024
جودة واضحة و الهوز ممتاز
alsalim
Reviewed in Saudi Arabia on June 15, 2024
واضح جودته عالية وسعره معقول
Jeeperscreepers
Reviewed in the United States on June 12, 2024
Makes working on the rc easy.
davidd
Reviewed in the United States on May 23, 2024
I installed this unit on my Kawasaki Mule. It was easy to install. The unit comes with several sizes of connectors so that it will fit most sizes of hoses.
Maverick
Reviewed in the United States on May 20, 2024
The quality of the can is good, but I highly recommend to get your own hoses With clams
Tim Howe
Reviewed in the United States on December 22, 2024
easy to install
Alex Mathews
Reviewed in the United States on February 20, 2023
Installed on a 2014 Sierra. Install was fairly simple. Mounting wasn’t the easiest. Had to drill a hole in the top of the L bracket and also cut it down some length. Pretty easy to do. Still would give 5 stars and still recommend!
Hishamksa
Reviewed in Saudi Arabia on November 1, 2023
مثل الوصف ممتازه وحوده عالية
Casey Curry
Reviewed in the United States on September 1, 2022
This is supposed to include a better quality hose but as far as I can tell, this is the cheapest you can get. Not the hose as pictured and that was part of the reason I ordered this unit. Not happy I have to spend money on a better hose...
Ma’moun Salah
Reviewed in the United States on December 6, 2022
It was installed as the instructions says, but resulted in blown to the head gasket. Just after around 1k! I believe that it’s design is very basic, a bottle with two openings on the top, will create pressure inside it and that pressure will go back through both of the openings. If you guys have to buy one, make sure to get one with specific one way direction of air flow inside it.
Recommended Products