Shopping Cart

Your cart is empty.

Your cart is empty.

Upgraded 4Pack 330031 Range Burner Receptacle Kit by Beaquicy - Replacement for Whirl-pool Ken-more Range/Stove - Replaces 814399 5303935058 5301167733

Free shipping on orders over $29.99

$11.53

$ 4 .99 $4.99

In Stock
  • ๐‘บ๐‘ผ๐‘ท๐‘ท๐‘ถ๐‘น๐‘ป ๐Ÿ‘๐Ÿ”๐Ÿ“ ๐‘ซ๐‘จ๐’€๐‘บ ๐˜ผ๐™๐™๐™€๐™-๐™Ž๐˜ผ๐™‡๐™€๐™Ž ๐™Ž๐™€๐™๐™‘๐™„๐˜พ๐™€- ๐‘น๐‘ฐ๐‘บ๐‘ฒ-๐‘ญ๐‘น๐‘ฌ๐‘ฌ ๐‘บ๐‘ฏ๐‘ถ๐‘ท๐‘ท๐‘ฐ๐‘ต๐‘ฎ. Beaquicy attaches great importance to the shopping experience of each customer.If you have any quality problem during guarantee period,please contact customer service in time.Customer satisfaction is our tireless pursuit.
  • ใ€Great Value 4-Pack ใ€‘-- 4 Pack 330031 Range burner receptacle kit includes 4 x plastic Receptacle Block,8 x high temp wire leads, 8x ceramic wire nuts, 8 x heat shrink insulator and 8 x metal brackets( two different metal brackets to match your old one,select the one for your situation). The kit is designed for use with ranges and cooktops. After the repair, all the burners will heat up faster and are easier to regulate temp.Price for a 4-pack is better value than purchasing individual units.
  • ใ€Premium Qualityใ€‘-- 330031 range burner receptacle kit is made of upgraded newest material-more stronger and wear-resistant than other's version.330031 terminal block kit is good quality.When your element will not heat at all, or not heating properly it is likely an issue with the terminal block. You need to remove the element to replace this part. While you have the element out, inspect the element and the terminal for any corrosion, arcing, or discoloration.
  • ใ€Compatible Designใ€‘--330031 Range Burner Surface Element Receptacle used for ๐‘จ๐’…๐’Ž-๐’Š๐’“๐’‚๐’, ๐‘ญ๐’“๐’Š๐’ˆ-๐’Š๐’…๐’‚๐’Š๐’“๐’†, ๐‘ฎ-๐‘ฌ, ๐‘ด๐’‚๐’š-๐’•๐’‚๐’ˆ, ๐‘ฒ๐’†๐’-๐’Ž๐’๐’“๐’†, ๐‘น๐’-๐’‘๐’†๐’“, ๐‘ป๐’‚๐’‘-๐’‘๐’‚๐’ ๐’‚๐’๐’… ๐‘พ๐’‰๐’Š๐’“๐’-๐’‘๐’๐’๐’ range models.Replaces Part#: 3374, AP3075808, PS340571, EAP340571, PD00002360, 814399.Please check the compatibility with your previous part and appliance's model before ordering this replacement. ๐‘น๐’†๐’‡๐’†๐’“ ๐’•๐’ ๐’‡๐’Š๐’ˆ๐’–๐’“๐’† ๐Ÿ” & ๐Ÿ• ๐’‡๐’๐’“ ๐’Ž๐’๐’“๐’† ๐’„๐’๐’Ž๐’‘๐’‚๐’•๐’Š๐’ƒ๐’๐’† ๐’Ž๐’๐’…๐’†๐’๐’”.
  • ใ€DIY Installationใ€‘--Be careful to do DIY,check your power unpluged before repairing.Tend to clean the stove before installation to avoid further trouble.You will need a wire stripper and both a flat and Phillips screwdriver.You can also use a heat gun if you want to use the heat shrink in the kit. Best way to go.Do all the burner plugs in one go. Now you're cooking!



Product Description

330031-11
330031-21
330031-31
330031-41
330031-51
330031-61

ThommyK
Reviewed in the United States on February 5, 2025
Stovetop works again. Easy install quality products.
welder314
Reviewed in the United States on February 24, 2025
Cheap plastic housing; compared to name-brand Amphenol connectors, these are one star.Contacts are low quality brass, functional. SHORT leads are pre-attached, and they expect you to cut off existing leads and connect with wire nuts. NOT the safest, and probably does not conform to code. And, they include plastic wire nuts that are TOO SMALL and have NO METAL - that's right, wire nuts with plastic threads that look like parts from a toy. I modified them to work, but I would never buy these again.
Athena
Reviewed in the United States on January 26, 2025
Great kit that works and is easy to use. Makes repairing your stove top super easy. Took only a few minutes. We only had to replace one, so the other 4 will be placed on a shelf for in case we need to replace others. And for the price? WAY cheaper then getting a handyman.
CarCW
Reviewed in the United States on July 11, 2024
I have an older downdraft jenn-air stove which would be a huge hassle to replace - but the burners don't work right because the receptables are broken. When I found these to fix the broken receptacles I was happy - I don't need to replace the stove, or even the whole burner trays, but I can just fix the broken parts. A little black bbq paint, and things are looking just like new :)The install was a little kludgy - I'm not sure how I feel about the ceramic wire nuts - they were tricky to get a good engagement on the wires - but with the heatshrink tubing covering them, hopefully they last a long time and don't cause me any trouble. So far, so good - it's great to have the stove going at full power again!
Texas Customer
Reviewed in the United States on February 24, 2024
Connectors could be sturdier, it took a bit of fiddling/bending/adjusting to make them work. Good thing I didn't need to replace all 4 connections on the range top!
Thomas Cambell
Reviewed in the United States on September 1, 2023
This set is great. I am a maintenance man and have had to replace these connectors on a number of stoves over the years. These are about a 1/3 of the price I usually pay at lowes or hd and they come with the shrink wrap that I did not get from either of those, a small thing, but nice none the less. I have done two stoves now with these since finding them and both have held up well according to the tenants over the last month or so. Really easy install I think anyone could do. I did not have to change the bracket out on either stove either the new plug fit in the old bracket so the install was super quick. Just make sure you have a good set of wire strippers (recommend bypass type) and a heat gun or lighter for the shrink wrap.
Jack Montefiore
Reviewed in the United States on December 14, 2023
This works well. The installation is straight forward so no instructions needed. The heat shrink tubing seems unnecessary. I just used some electrical tape to secure it together though it may end up leaving residue if this eventually fails in the future. The only thing is I wish it came with mounting screws. It doesn't. My stove isn't 100% compatible as it's fairly old from an unknown defunct brand. I managed to bend the metal to get the correct installation angle. I had to find a compatible screw to mount it as the mounting hole is not threaded like my old one. Overall it works fine. I'm tempted to replace all of them but 3 others work fine without issues. Maybe in another 10 years...
Dennis
Reviewed in the United States on October 6, 2023
ย 
Recommended Products

$19.00

$ 7 .99 $7.99

4.8
Select Option

$74.75

$ 32 .99 $32.99

4.7
Select Option