Your cart is empty.
Your cart is empty.Product Description
Motorcycle LED light strip
Flexible LED Light Srip :
1) Superior Material: Durable and Soft Rubber Strip
2) Measurement (L*W*H) : 8 * 0.5 *0.3 Inches
3) Power Cable: Measure about the length of 23.5 inches
4) LEDs: 3528 SMD LEDs
5) Voltage: DC 12V
6) Waterproof Grade: IP 65
LED Indicator Light Strip
All-in-one LED Strip
This is a light strip which can both be one for a running light and for a bright signal light, like brake light or turn signals ( left and right ).
Super Bright LED Strip
This LED strip can be installed to work as a tail light on your motorcycle or scooter. It's very bright, easily visible in the distance and highly visible even in day light.
Flexible LED Strip
Adopted with the durable and soft rubber, this light strip is nicely waterproof, yet light and flexible enough to keep it in place on your vehicle.
High Brightness SMD LEDs
- This LED strip comes with 32 SMD LEDs and measures 8 inches in length.
- Equip with high brightness SMD LEDs as light source lamp beads, green, no flicker and long life etc.
Waterproof & Dustproof LED Strip
Thanks to the sealed design and rubber, The light strip is nicely waterproof and dustproof enought to protect itself from the element.
Highr Brightness LED Lamp Beads
This LED strip is equiped with 32 high brightness SMD LEDs as light source lamp beads, green, no flicker and long life etc.
Strong 3M Adhesive Tape
Each light strip is backed with 3M Adhesive Tape on the backside. You can stick it on any positions of your vehicle.
Tips: Don't forget to clean the area with alcohol swabs to remove any oil and grease before you stick it on your vehicle.
Wire Connection & Light Installation
Easy connection
This light is flexible, bright and easy to wire. The wire diagram includes in the product piture is exactly how it is.
- 1) White wire for red light low beam
- 2) Red wire for red light high beam
- 3) Black wire for negative
- 4) Yellow wire for right amber light
- 5) Green wire for left amber light
Wire Connection
5-wires Connection
This LED light comes with 5 wires. One for a negative. One for a running light. One for the bright brake light. And two for turn signals (Left and Right)
Light Installation
Gentle Suggestions :
1. The light strip is flexible enough to be bent or curved to stick it anywhere.
2. As long as you stick it on a clean and oil-free surface, it won't fall off easily.
Andrew
Reviewed in the United States on May 7, 2024
For the money you can’t beat it it works great it’s bright the turn signals could be a bit brighter but it works great and is holding up pretty good been 4 months and it’s still on the bike the adhesive is holding great all the led lights are still working the wiring is plenty long enough for almost any motorcycle it fit perfectly on my 2017 street bob rear fender and the brake and running light are bright
Z
Reviewed in the United States on April 15, 2024
For the money this LED strip is awesome, the leds are bright, quality seems excellent so far. 4 star ONLY for the guage of the wires, basically a couple strands of hair thick. If your not good with wiring be very careful.
Steve
Reviewed in Australia on September 1, 2020
wiring very thin, not sure if I will install this yet?
Customer
Reviewed in the United States on October 21, 2019
I use these on all my bikes. Bright, simple to install if you read the advertisement on Amazon. No directions given with product so you’ll need the picture give on Amazon for selling the product to give you an indication of what wire should go where. It’s not rocket science to install. If you have difficulty installing, you probably don’t belong on a motorcycle. Only thing I don’t like is that the wire gauges are small. I mean they are delicate and easy to mangle if you’re a brute. Also the insulation on the wires don’t seem to be robust compared to better high quality alternatives. They are inexpensive so you get what you pay for. All the ones I have installed so far have worked for over a few years and all the LEDs have held up. We will see in a five year time of daily use and exposure to sun and elements. Till that day...another review might be in order.
Devin Thomas
Reviewed in the United States on April 30, 2019
*READ BEFORE BUYING*Alright, time for one of my many honest reviews on here. This light works. It is flexible. And I didn’t believe everybody complaining about how small the wires were coming from the light, but they are extremely small. Like 26 gauge wire. But with a careful set of hands, I managed to wire them into my stock OEM ATV brake light harness. This light comes with 5 wires. One for a negative. One for a running light. One for the bright brake light. And two for turn signals (left and right). I did not use the turn signals. So I wrapped them up and made them water tight just like I did with everything else including the connections I made to the wiring harness. As far as waterproof goes I’d give it a 3 out of 5 stars. They really didn’t do much to make any seals around both sides of the light. Even where the wire goes in, and the other side as well. But was easily fixed with silicone gasket maker and a neat electrical tape job. Over all this product may be chinese, it could be russian, I don’t care. It works. No LED’s have died yet. I got it 2 days ago and wired it up immediately. So as far as a longevity thing goes, I’ll edit my review in a month or so after I put it through the ringer and give it a full opinion compared to these stupid other reviews.EDIT: Still holding up. Works perfect. Hasn’t lost brightness, no water issues, no LED’s burning out. Still works.EDIT TWO YEARS LATER: Sold the atv. Brake light worked correctly the entire time. No shorts, no issues. Guess it was just one of those weird products that are cheap but stupidly reliable. Bought a motorcycle now, will be purchasing another one.
NathanD
Reviewed in the United States on May 6, 2017
Hello All,I purchased this light because my 2016 HD Iron 883 only has the 2 bullet lights and I didn't feel THAT safe about people being able to see me day or night. So, I originally bought a taillight that "fit" the Harley sportsters underneath the fender and was supposed to be flush. If you're looking at this review, you've probably seen what I'm talking about if you searched the sportster taillights like I did. DO NOT BUY THE BIG LIGHT I INCLUDED BELOW***BUT, the one I bought was so thick! It stuck out about an inch from the bottom of the fender. Then, when my girlfriend and I 2 upped on my motorcycle, we hit a speed bump going average speed and the suspension dipped so low that it was literally DESTROYED by the wheel. Like seriously, Why would they make a light that sticks so low that it literally had less than an inch of clearance from the tire!!SO, I stumbled upon this light to replace the the poorly designed one that broke. I wanted something that had a good amount of clearance and/or was completely away from the tire altogether. This light is flexible, bright and easy to wire. The wire diagram included in the product photos is exactly how it is. Self explanatory. I did not use the turn signals as I rely on my bullet taillights as turn signals and I had originally hooked it up as a brakelight with a flashing module. I included what I used in the product link:***HERES THE THING.... The original light they sent me had 4 burnt out LEDs for some reason. As you can see in 3 of the photos I included, the working lights did flash when brakes were applied. However the 4 right LEDs were dead.I contacted the seller and they sent me a replacement ASAP! The seller was great and I received the new light quickly and it works with no problem at all!So thank you to the seller for providing excellent customer service! I will be highly recommending this light! Can't wait to ride my baby with the comfort of knowing that people will be able to see me clearly day/night! I included photos of it off and on and you can really see how bright they are even during the day!
Recommended Products
$19.99
$ 9 .99 $9.99