Your cart is empty.
Your cart is empty.Heavy Duty Aluminum Steering Wheel Spinner. Time tested quality and durabilty for commercial trucks & heavy equipment. Heavy duty ball bearing design with metal base, and includes 2 metal brackets to fit most steering wheels
frankfrank
Reviewed in the United States on June 14, 2024
These are great knobs, and are the only model I have tried that will never rotate on you. The key to the design working is that it has 4 legs to the base (3 long one short) so as long as you install it on one of the spindles of the steering wheel, it can't rotate on you.The only things to plan on with installing this are:1) to take advantage of the above feature you will need to shim out your spindle under the leg to make it roughly planar with the top of the wheel, this will make steering the easiest. I use lead sheeting cut to not protrude and it forms the shape.2) You don't want the bolt sticking out too much so be ready to buy the exact length you want at a store or plan to trim the ones you get with this. Otherwise they may annoy your hands or hit your legs depending on your setup.Writing this review since I went to buy another one for my boat and see that the field is still full of junk or you need to spend $100+ for one that works, so this occupies a unique niche in the realm of steering knobs in that it is reliable and inexpensive.It is also very strong, I really reef on it on my lawnmower without power steering on side hills etc and it has never moved or bent internally.
Joe Templeton
Reviewed in the United States on February 23, 2024
Product was as advertised and arrived promptly -- no complaints.
CWB
Reviewed in the United States on January 16, 2023
I bought this steering wheel knob after reading some of the reviews, that said its a good product but might need to be modded a bit to fit correctly on your steering wheel. I did have to modify the larger bracket, but it was easy. The larger bracket's opening was too skinny for my steering wheel, it looked like it would work better for the older skinner wooden type etc steering wheels. But all I had to do was take the bracket and flip it upside down, then set it down on some concrete stairs. Then I took a ballpeen hammer, turned the hammer around so the rounded end was face down, and gave it a few good hits right in the opening of the bracket. This widened that opening nicely. Then turned the hammer around and gave the bends at the ends of the bracket a few hits to even it out and make it line up flush with the new angles of the opening. Now it fits my steering wheel, and the spinner knob itself is very smooth and comfortable.If you dont might some quick easy modification of the bracket that will only take a minute, this can be a great steering wheel spinner knob.
cecil robuck
Reviewed in the United States on July 21, 2022
I put this spinner on an old forklift with a thin metal steering wheel and it fit nicely and is a wonderful hand grab freeing up my other hand for fork controls. I have seen/used many spinners in my life and this is one of the best for my application.
R. C. Carmel
Reviewed in the United States on February 25, 2022
This a very strong unit! It's not made to look pretty, it's built to work hard and last! You will need to obtain longer bolts (cut off extra length once installed) and if you have a "soft type" steering wheel, you will need to spread the lower bracket some to fit and yes, it will "bite" into the softness of the steering wheel , but this really makes it tight with the wheel. This is a unit for hard work, not for looking pretty! Once installed, using a little thought and effort, this unit will last for years! Has very smooth operation and very solid with the wheel. Worth every cent!
松田信哉
Reviewed in Japan on August 5, 2021
手にフィットして触り心地も滑らかで使いやすいです｡ 但し、取り付け金物が小さすぎて加工しなければ取り付けができません｡
Damo
Reviewed in the United Kingdom on July 8, 2021
Great product, would have been 5 stars but had to supply different bolts to fit to truck steering wheel
Nick
Reviewed in Canada on February 1, 2021
Great quality!
Credx2
Reviewed in the United States on August 15, 2020
Nice spinner. Well made. Turns nicely. The clamp was a bit big for the wheel on my boat. I put a rubber shim under the clamp to hold it tight and to protect the wheel from scratches.
Yury D
Reviewed in Canada on July 12, 2020
Great product as promised, and good quality!!!
Kindle Customer
Reviewed in the United States on July 19, 2019
First of all the price was unbeatable for such a quality built steering knob. The installation went smoothly once I decided on the best wheel location for my lawn tractor. I simply omitted the smaller (U shaped) collar and instead I used the second flatter collar (included) as the bottom plate. I did have to find longer screws to make it work, but once installed it operates perfectly for tight turns and quick steering around obstacles in my yard. I recommend this device to anyone considering a steering knob for their particular vehicle.
カスタマー
Reviewed in Japan on December 31, 2017
トラクターで使用しています。重機やトラクターは作業の関係上ハンドルを大きく切ることが多いので、操作時に少々の力がかかってもステアリングにしっかり取り付けられていて「ずれ」ないことが重要です。他社製品を取り付けていたのですが使用しているうちにノブがずれてしまい使い物にならず、酷使に耐えるモノを探していたところ北米で重機によく使用されているコレを見つけました。 乗用車には似合わない無骨な作りですが、ボールベアリングが内蔵され、強度も十分あり酷使に耐えられる製品です。ステアリングの形状によっては、少し細工する必要があるかもしれません。 使用感は、力を入れ易くボールベアリング内臓なのでスムースに動き、とても気に入ってます。重機、トラクターなどには最適なハンドルスピンナーと断言できます。
chris larson
Reviewed in the United States on November 15, 2017
Yeah, it's OK. It frees up my beer hand. I'm using it on my John Deere 125 riding mower. It comes with 2 back plates and the bigger one fits my thick steering wheel. The bolts are too short for the thick wheel. Bearings work well. The finish was rubbed off when I got it, new. The top cross plate won't stay on the top of the steering wheel so I put it at a 45* angle where the spoke meets the wheel. It works fine like that but it's not right. Good enough for this application, it's a lawn mower, but if it had to be nice I would have returned it.
Recommended Products
