It really needs 2 people to put the shed together as the walls are flimsy. I tried to do the whole thing myself but needed a little help when connecting the walls. Overall, it's together, in place, and filled with garden stuff. Wind and rain are no problem, I've never had an issue.

Perfect and as expected! No dents in any of the materials provided. It took about 5 hours, over two weekend afternoons to put it together by myself, but very straight forward. Definitely recommended.

Instructions were awful but after contacting the seller and getting new instruction shed is up

BEWARE: NON-RETURNABLE, NON-REFUNDABLE, AMAZON WILL NOT HELP YOU! I was sent a much smaller shed than advertised so please see my pictures for measurements. My biggest issue is the door way height, I'm 5'5" and I have to remember to duck to get inside. Putting it together does take several hours and you will need to use the drill a few times but for the most part it went together as instructed. It's the same size as some of the other advertised sheds that are much cheaper so check the prices, this one was more pricey for no reason.Update: This shed is useless, I knock my head on it all the time and although I filled all the gaps with tuff stuff, water still gets in everytime it rains so I can't leave anything in there that can't get wet, what's the point of the shed? Do yourself a favor and get something more sturdy and practical.

The instructions need to be updated to be more clear regarding how to roof fits to the frame…. When completed my one left gaps that allowed water to ingress into the shed and down the back panels… had to buy filler to stop it from happening.

We were looking for a small utility shed to keep some garden tools in, and this one was PERFECT at 5' x 3'.You can see the attached pictures if you're so inclined, but I really wanted to review the assembly since everyone seems to be crying about it.There are reviews saying this took 10+ hours with 2-3 people and the holes didn't line up and all this nonsense.If you have the slightest mechanical inclination, this is about as easy as it gets. Every part is numbered, the diagrams show the assembly with the numbered parts (including numbered hardware) and with the exception of two somewhat ambiguous diagrams, this was a breeze.I did this, by myself, on a windy day, in less than 6 hours. The most time-consuming part was legitimately breaking the plastic washers off and putting the screw through them.If you have a helper, this should take 3-4 hours max.Every hole lined up perfectly. I'm thinking these guys who had to drill their own holes tightened a bunch of bolts before getting the rest of them in. Rookie mistake.Great product for the price. Please disregard the construction demo zone in the pics 😆

I agree with several others - very short screws, & am skeptical of its longevity. Will use some sort of adhesives on the screws to help hold everything together. The instructions were atrocious. Note to others: the top "frame" go on the inside of the panels, not on top.Pros:Price.Cons:Definitely need 2-3 sets of handsThe screws are damnedly easy to drop and lose.Quality - I scratched the finish a few times lightly while trying to get a screw in. I don't expect it to last long in the harsh north weather.Poor instructions. As noted, it took me awhile to figure out how the top frame were supposed to be set up. The drip edge that go over the roof's top/front edge is almost impossible to get screwed in.Inventory - I ran out of plastic washers when I had 40 or 50 more screws to go. While I dropped a few, I used a magnet wand to find most, so its count is definitely out of whack. I contacted the seller, and we'll see if they respond regarding this.TBD:Durability - we'll see how this holds up in heavy snow.

First of all, O-M-G, You better be prepared to put this together!!! It took 9 hours, no breaks... there were 2 of us and sometimes 3, to hold all of the pieces while drilling at the same time! If you can afford to pay a couple of guys (who assemble things regularly), I would HIGHLY recommend that! We're used to putting IKEA, Walmart and Amazon DIY things together, but THIS was the MOST DIFFICULT thing (by far) we've EVER put together!!! Here's why: the worst of it are the screws, they are SO TINY (all 3 different ones that go in all places) that they REALLY play "heck" on your fine motor skills, so you end up dropping them (A Lot) and have a really hard time holding them while trying to drill them in, No Joke! And then you have to wonder, because they're So Small, are they gonna hold this whole thing together and hold the door on for the long haul... like, for a year or years to come??? Then they send a pair of gloves in the pkg of tools for a reason (but only 1 pair), so someone else, who may be helping, is at risk of getting cut by the steel edges... I learned that first hand! Was cut several times by the steel edges, very fine, SHARP edges! So have a 2nd pair of garden gloves or something similar for the other person on the hand that's Not holding the screws... Then, the steel panels are very wobbly/flimsy and thin (of course because the whole unit is not expensive and total weight is 74 lbs) so when you're standing them up and trying to drill in the bottoms and sides together with these tiny screws and drill them to each other and need 2-3 people to hold them while you're trying to also put these tiny screws through 2-3 sheets of steel and/or the frame or L bracket, it's VERY frustrating because you don't have a lot to work with and someone ends up holding up the panels or the bars around the top (which is the frame) for a long time which is grueling and tiresome! So, we did use the instructions and the video to make sure we did everything but some things were still "fuzzy"... like the bars on the inside of the doors, I took 2 pictures of them because the top one is put on correctly, but the bottom one is not, it does not line up with the holes in the middle... but nothing on the bar indicates top or bottom, you just need to make sure all of your holes line up. Then ALL of the roof panels hang over the edge of the shed, especially in back (by about 3-4 inches)... so again, you really need to look at your drill holes, because the directions or video doesn't do a good job of letting you know this. And then, of course, there's no floor, if you were wondering... so it's best not to put it on your lawn, unless you want to build a floor for it... we put it under our car port. So after all is said and done, I must say, it was still a good value for our money and it came out feeling really sturdy, not wobbly, the corners line up, the locking mechanism, lines up, the door lines up and feels sturdy enough and it was light enough to move into place! I ordered some metal glue that I'm gonna put on each screw, just because they're so small and I don't trust them to stay in place for the long haul, but you can do as you see fit! For now, it looks like it's gonna meet our needs and because it's way back, under the car port, it's away from the rain and most of the outdoor elements here in Florida.