Your cart is empty.
Your cart is empty.Product Description
Name: KI31/KSD301 Snap Disc Switch
Use：Temperature control/Overheat protection
Action type: Normally Closed（NC）
Voltage and current：AC125V~250V/16A; DC24V/48V/20A
Operating Temperature：110-240°C(230-464°F)
Temperature accuracy：±5℃; ±8℃; ±10℃
Contact resistance：≤50MΩ
Insulation resistance：≥100MΩ
Life span：About 100,000 times
Electrical strength：AC 50Hz 1800V lasted for 1min, no flicker, no breakdown
Size (Each)：1.34" x 1.18"x 0.47" (L*W*H)
Mounting Hole Spacing：23.8mm / 0.937inch
Pin width：6.3mm/0.25inch
Package Content：2pcs x KSD301 Thermostat Switch
Tips:
1.KSD301 and KI 31 are the same 1/2 inch thermostat, but the way of naming is different, the same type has a well-known manufacturer's model KSD302/KSD303/KSD201/1NT/TK 24/36T /US-118 /T11 and other names. Performance is consistent and all are interchangeable.
2.When you choose to control temperatures above 120 degrees, engineers recommend choosing a ceramic shell thermostat. Because in actual operation, there is a high amount of waste heat generated during heating after the thermostat is activated. Ceramic thermostats are more resistant to high temperatures and have more stable quality
Installation Precautions:
1.Before installing this part, unplug the household appliances,Cut off the power completely.
2.Take a picture first before removing any parts, so you know how to restore everything at the end.
3.The temperature controller is a series circuit, not parallel, installation must refer to the original product circuit design.
4.Do not collapse, loosen or deform the top of cover surface during installation to avoid affecting performance.
5. Lock the screw hole, should be fixed at the same time, then lock, avoid the bracket to the other side of the tilt, resulting in temperature control aluminum cover deformation, temperature control parameters change.
6. For the sake of safety, the connecting wire terminal shall be insulated and closed.
7.Do not allow liquid to penetrate into the interior of the thermostat or crack the housing.
8.The thermostat should be stored in a warehouse with RH less than 90% and ambient temperature less than 40 ℃, which is ventilated, clean, dry.
9. CHOKING HAZARD -- Small parts. Not for children under 3 yrs.
Self-assembling Machine for Snap Disc Thermostat
Customized, high production capacity, fast speed, stable quality.
Each component is carefully selected, high precision, high efficiency.
Automatic Detection System for Thermal Cut-off switch
Before packaging, each temperature control switch will be checked by an automatic inspection machine, and unqualified products will be picked out.
Rapid Action Bimetal Disc Thermostat
KI31 and KI32 quick action thermal temperature switch.
Widely used in instant hot water dispenser/ faucet, dishwasher and other thick film heating products;
KSD301 Thermal fuse Model Code
KI31 is also known as KSD301.
For example: KI31120B5125V16A means 120℃ Normal close KI31/KSD301 thermostat,accuracy ±5;
Action & Reset Temperature
KSD301 Temperature Switch:
Double metal chip
Contact sensor
Speed dynamic type
Sensitive,Reliable,Safe
Stable action temperature
Long service life
No arc phenomenon.
Mainly used for Coffee maker,Drinking machine,Toaster,Microwave oven,Water Heater,Portable Refrigerator'Water dispenser,Electric pad etc.
In addition to appliances, the KSD301 thermal control switch also widely used in equipment :
Communication equipment
Monitoring equipment
Welding equipment
Electric tools
Refrigeration equipment
Heating ventilation equipment
Boiler equipment
Electric heating products, etc
Denise F.
Reviewed in the United States on February 27, 2025
I have a hot air electric heater with a bad overload found the correct one and bought it works great 5Star rating
Customer
Reviewed in the United States on February 2, 2025
Works great!
RedReiter
Reviewed in Canada on February 18, 2025
Looks to be made well.
Donnsj
Reviewed in the United States on February 11, 2025
Needed to fix my coffee pot. Needed to bend the contact tabs in order to fit in correctly. A little thermal paste, and I was good to go.
M Skiles
Reviewed in the United States on February 10, 2025
Replaced in air fryer and has not tripped!
W. W.
Reviewed in the United States on January 6, 2025
Repaired a heater. Works great
michel lavallee
Reviewed in Canada on January 5, 2025
Exactly what needed
Jose M. VB
Reviewed in Mexico on September 7, 2024
excelente ,tiene ya varios meses funcionando sin problema, en un horno de microondas LG
Ken S
Reviewed in the United States on September 12, 2024
Loved it! 100+ dollar coffee maker dies at 2yr looks brand new. Took it apart. Checked parts found thermostat bad. NOW IT WORKS FOR LESS THAN 20 BUCKS!
Nicholas Carrasquillo
Reviewed in Canada on November 5, 2024
Used one of these to get my oil space heater back up and working again. Exactly what I needed.
Tinker-Dan
Reviewed in the United States on November 20, 2024
These fixed the problem and have continued to work for about 6 months now!
Ray
Reviewed in Mexico on January 21, 2024
Trabaja correctamente, mi cliente disfrutando su electrodoméstico.
Turnhob
Reviewed in the United States on April 23, 2024
Saved my microwave from the trash heap!A horrible, acrid burning odor filled the house & nauseated me when the original thermal cutoff burned. Upon disassembly, I spotted the burned culprit. The original had a bakelite body which when burned emits a toxic cloud! The replacement fit perfectly and has a ceramic body, which will not burn! Better than the original from GE. New wire pigtails and spade connectors and back in business! I don't recommend that the average DIY'er attempt this due to the potential for shock or electrocution, but someone with knowledge and skill can certainly repair his/her appliance and keep it out of the waste stream! (I was in the appliance repair trade for many years)
Recommended Products