Your cart is empty.
Your cart is empty.Product Description
16W Starlight Headliner Set for Car Roof Decoration
Why should you choose our fiber optic headlights?
- 8 static colors (mixed white, pure white, red, green, blue, yellow, ice blue, pink, DIY colors), with adjustable jumping, mixing, brightness and fashion speed.
- Control the alternator remotely or via a Bluetooth connection application. Application control: more than 16 million static colors, 1.100% sound sensitivity and dimming function adjustment, 20 dynamic modes, etc.
- 16 W High brightness and energy saving, safe and durable
Waterproof non-conductive filament cable
Owing to the waterproof and non-conductive fiber optic cable with end glow function, it is versatile and does not carry the risk of electric shock.
Multiple modes to choose from
Through APP or Bluetooth control.it is easy to choose all light switching modes, including static colors, jump, fade, flash and breath modes, so a combination of RGB colors with pure white light can produce other colors.
Romantic starry sky
Decorate your car or room like a sky full of stars, romantic and beautiful. More suitable scenes: weddings, birthdays, dinners. (Suitable for car or room.)
How to install the fiber optic light?
1. Mark star points of thepattern you want.
2. Drill holes vertically of thr points you marked.
3.Insert fibers about 10cm into the board.Then fix with hot melt adhesive or glass cement.
4.Straighten and tied up fibers in small bundles to avoid tangled.
(Tips :better to count the quantity and the length of the fiber in advancebefore insert then into holes.And mark which bunch use at which area.)
5. Conncet and power on yo test.Clip off the excess length from beneath with nail clippers and finish installation.
Tips:
- Make sure where you want to place the light enginee.It should be a place can get power easily,convenient for maintenance and keep ventilated.
- Fiber length you need=length from LED light engine to the star light point+30~40cm(for some slight tangle that you may can not avoid.For the fiber length to insert into LED light engine.)
- Do not press or tread on the fiber while installing.
It is not a small project to install. but after installed,you will know it is worth and suprise.
Customer
Reviewed in the United States on August 27, 2024
The media could not be loaded.
Paul T Hurst
Reviewed in the United States on May 22, 2024
Bought this for my kids Pick;Up and install went in pretty much as planned. Unfortunately, the twinkling function broke within one week on the first box and within days on the second box. It’s an easy fix once we figured out what happened. The screw came out on the spinning, circular part that makes the light its brightness through the fiber optics. A little tight and tightening the screw down eliminates the problem. Unfortunately, it’s a pain to get to you if you have the box mounted in the headliner
Claire
Reviewed in the United States on December 30, 2024
Had these installed for my boyfriend for his birthday and they look awesome! Fun messing with the different light colors. They work great so far, no complaints!
Crystal
Reviewed in the United States on December 28, 2024
Very time consuming but worth the work! My son loves it!
Ginessa Link
Reviewed in the United States on December 25, 2024
Been working on this for 3 days now. I got the 1300 count, the machine is huge and gets pretty warm not sure where ill put it... does not have a long enough cord for a cigarette lighter plug in or even the wall plug...sooooo...I have a 2015 Dodge charger 4 door for referenceThe app is extremely difficult to figure out and most options dont work, This is a VERY time consuming job, the TWINKLE SYSTEM IS BS.... you have to, by hand connect the strands to the machine and they dont even fit tightly they fall RIGHT out immediately. Its really confusing to do too as the directions are unclear and they fall out of the spot even when tightened. Waste of money, waste of time. And ive honestly just ruined my car....NOTE HOT GLUE MELTS THE OPTICS AND CAN STILL BE USED BUT YOU WILL HAVE TO PULL THEM THROUGH SLOWLY AS THE GLUE DRIES
Nebti20
Reviewed in the United States on October 7, 2024
The media could not be loaded.
Christian
Reviewed in the United States on October 31, 2024
Super starter kit for putting together a fiber optic display, but not everyone gets a meteor. I've enjoyed the thought of putting one of these together for years and now have the opportunity, and get my kids involved as well. Its a fairly large undertaking time-wise, but the results will eventually be worth it. You set up the frame & whatever you are using as a backing board, then comes the fun of inserting each strand individually into and through the board. If you use something solid you have to drill, so we started with painted styrofoam thinking we could poke something through, but it kept chipping off little pieces where the whole board would have to be repainted by hand at the end, (and you can't push the little strands through anyways unless maybe if it was super thin), so we started over. This time its a thin board from our local big box that has to be drilled, but at least it will be solid. Can drill it into the ceiling beams for support or could drop it a few inches on chains at the corners if we don't want the light box in the ceiling. The light box puts out two colors at a time, and you can mix & match with the app. The twinkling effect is pretty amazing and I can't wait to see the final setup. Speaking of setups, if you know you are getting one of these you can set up the board ahead of time and then just push fibers and hot glue them as you go. Not hard to do once you know whats what. Anyways, super cool project and would definitely get again.
Shanel
Reviewed in the United States on October 2, 2024
The media could not be loaded.
Recommended Products
$237.00
$ 93 .99 $93.99
$49.99
$ 22 .99 $22.99