Your cart is empty.
Your cart is empty. KINDLY TIPS
Huacaoe 1 channel 12V Smart life/Tuya app wifi Relay,work with tuya/smart life app,support 2.4G WIFI only,if your router with dual bands and same SSID,please close 5G firstly.Usually once the relay was powered on,light will flash quickly,it will go to quick pairing mode automatically,no need to long press the pairing button,tap + in smart life app,it will find your SSID,enter the correct password of your wifi network.please make sure to put the relay close to your router and your phone have to connect to the same 2.4G WIFI when pairing.If it doesn't work.please long press the pairing button until light slowly flash,configure it with compatible mode.
The WIFI Relay Module supports inching /self-locking mode and extra 433mhz RF function.Users can add the device to the Smart life/Tuya APP to remote control connected home appliances or devices.
In self-locking mode, customers can remotely turn on/off connected devices immediately.
When in inching mode, customers can have two wiring ways to select:
Turn on 1s and then auto-off
Turn off 1s and then auto-on.
The relay work as button, without voltage output, the power supply input (AC/DC) just for the PCBA
The product enables remote control of home appliances through the mobile application Smart life, available on both Android and iOS.
Supported functions include:
1.Remote turn on/off
2.Timing schedules
3.Device sharing
4.Group management
Reminder:
Power Supply: DC 5V with Micro USB or hard wired 7-32V
Package included: 1 x Jog Inching Self-locking WiFi Wireless Smart Home Switch
1x English Instruction
Voice control WIFI Switch Timer:
Works with Amazon Echo, Echo Dot, Amazon Tap
Works with Google Home, Google Nest,This product Compatible with Alexa.
derp derpington
Reviewed in the United States on March 2, 2025
Such a neat multi relay. Everything works to specs, and it's easy to set up while being compact. Very happy with this product.
worldenemy
Reviewed in the United States on February 5, 2025
Have it connected to my garage door and a few lights. Running automations in Home Assistant to control different set of lights base on open and close of the garage door. I just ran the new wires to the light in the ceiling and connected to this relay module instead of adding smart switch for each set of lights and it only cost the same amount of money of one smart switch. The relays run a little warm, I wouldn't connect anything that draws more than a few (3?) amps. Setup was easy, add to the Tuya Smart Home app then set up devices in Home Assistant.
CC
Reviewed in Canada on February 23, 2025
Does a great job as a garage door opener. Would be a 5 if it also supported homekit.
Joe E.
Reviewed in the United States on January 30, 2025
I got this Tuya 4 Channel Updated USB 5V/DC/AC 7-32V, Momentary Inching Self-Locking Relay Module to control my 2 garage doors. While I'm not an expert, we have other smart switches, outlets, in-wall relays and devices so I'm not exactly a novice either.This device was simple to wire in, setup, and use. I like that it uses a simple 5 volt DC power supply (not included but who doesn't have a few laying around?). Once powered, it uses the Tuya app for control. Since I already have some other Tuya devices, this one connected up quickly and easily. It also connected to my Google home environment seamlessly. It has several features individually tunable to each channel. I use the inching ability to use these relays as momentary switches.A few things that could be better: The instructions are written in TINY font and, while helpful, they could be more informational; Like exactly what NO, C, & NC mean. The LED indicator lamp is hidden inside the case and can be seen through a small set of holes ONLY if you look at it at just the right angle. There are 2 pull out mounting tabs on one side of the relay. I'm not sure exactly how they're supposed to work, but I used them to mount it to the wall.Overall, for the price (~$20), you can't beat this 4 channel relay. I'm trying to figure out what I can use the other 2 channels for to fully utilize this great find!
Peter
Reviewed in the United States on January 24, 2025
My deck lighting is nice, but the switch is in the house, on a wall that is hard to get to (behind the only place my wife could put her large massage chair) - I know, first-world problems - and not obvious to anyone if they are looking for it. Problem solved: put this in the outlet box, put a blank plate over it, and it is now a smart controlled-only set of lights. It was easy to set up and works great. Love this, I will be adding more to the house, as I have plenty of other areas that need the same treatment.
M. W.
Reviewed in the United States on January 23, 2025
This product is a 4-channel Smartlife/Tuya controlled Wifi hub, which can be used to control 4 independent DIY IoT devices or circuits. It can be powered by 5V DC or 7-32V AC/DC input.Pairing or adding this device to the Smartlife app(which I am currently using for other IoT devices as well) is easy and not very much different from other Smartlife compatible IoT devices, just within a minute.Using it is also straightforward and as easy as pressing the hardware button(s) on the device or through the app, no complaint!Then, through the hardware or software button(s), the relay(s) open or close can be controlled. It has 4 independent relays with the 3 major pinouts wired out to the terminal block, so the COM, NC, NO of the relay can be accessed.Input with 5V DC is through the micro USB, which is kind of legacy or outdated in 2025, it will be better if it is USB-C instead.Input with 7-32V AC/DC is more versatile, it can even take the AC24V from most sprinkler controller power adapter as AC24V is commonly used in those sprinkler controller. I can imagine then it can be used as a DIY 4-zone sprinkler controller with properly wiring.The back of this device is a little bit funny, it seems that it can be mounted to some sort of special or proprietary "rail", it does not mention detail about this.The "status led light" in red is sneaky hiding behind a "microphone" like holes, so it is difficult to see.It mentions about it can be controlled by 433Mhz remote, but no remote is come with, also, no other accessories like power adapter or cable is come with as well.Other than these minor "to-be-improved", it works as expected and advertised. Great for DIY projects or circuits to be controlled via Smartlife app with wifi.
Panapat
Reviewed in the United States on January 22, 2025
I am using this to control two solar swimming pool pumps, its a Tuya device and can be integrated into Home Assistance out of the cloud. I am using it because I need to wire the relays NC and this has the option of NO or NC which is perfect.
Grace
Reviewed in the United States on January 16, 2025
Just got this WiFi remote switch, and it’s awesome. Works perfectly with my Google Home, and setting it up was way easier than I expected. Honestly, it’s a game-changer. Makes turning the lights on and off so much simpler and fun.
stvrdl
Reviewed in the United States on January 12, 2025
This module comes in a case, that's good.The case has no markings for the output relay or the DC input, that's bad.I marked the case myself with a permanent markerThere was also no peep hole for the relay on LED.I drilled a hole immediately to the left of the C E RoSH marking and down 1/16 of an inch.That put it pretty much directly over the on LED.Typical Tuya setup, don't forget to make sure your phones on the 2.4 wireless.FYI, it is using Tuya protocal 3.4
Recommended Products
$21.99
$ 10 .99 $10.99