Your cart is empty.
Your cart is empty. TUPARKA 40Pcs 0.4mm Ender 3 Nozzle Kit 3D Printer Nozzles MK8 Brass Extruder Nozzles for Makerbot Creality CR-10 with Storage Box
Specification:
Quantity: 35pcs MK8 nozzles + 5pcs cleaning needles
Color: Gold
Material: Brass
Output Diameter: 0.4mm
Input Diameter: 1.75 mm
Screw Thread: M6
Hexagon Diameter: 6 mm
Package includes:
35 x 0.4 mm 3D printer nozzles
1 x plastic box
5 x 0.4mm cleaning needle
1x plastic storage tube
Attention:
After replacing the nozzle, please recalibrate the distance between nozzle and build plate to ensure the quality of print parts.
Compatible with:
3D printer with MK8 style hotend external M6 thread, such as MK8 Makerbot Anet A6 Anet A8, Creality CR-10 CR-10mini CR-10S S4 S5, Tevo tornado, MK8 Makerbot Reprap Prusa i3, Ender 2, Ender 3, Ender 5, etc.
Jesus G. Rodriguez
Reviewed in the United States on June 5, 2024
Purchased this to make sure I always have new nozzles for my printer
david
Reviewed in the United States on May 23, 2024
the price point is great for the quantity and QC
Donald Adams
Reviewed in the United States on November 29, 2024
These are easy to solder and easy to modify and perfect for my blowtorch project.
jonathan
Reviewed in the United States on October 24, 2024
Got these to have backups and after a few months of not needed them I decided to change my nozzle and found out the hard way that the treads were too short causing filament to ooze out all over my hotend block...Good product but Definitely not for an ender 3 v3 se
James M
Reviewed in the United States on May 25, 2023
These nozzles work great especially for the price. Creality Ender 3 Pro
Derrick
Reviewed in the United States on June 30, 2021
So I was a bit hesitant buying this set since it was cheap. I didn’t think they’d all be the right size but I was okay with that. Boy was I wrong, every single nozzle was true to size and fit my cr10 v3. Good quality and also all the needles were true to size. Measure each one with a digital caliper. Would buy again
Luxurious Garbage
Reviewed in the United States on April 30, 2021
I've been through about half a dozen of the factory CR-6 SE nozzles and never thought to try anything else. I've been doing several long prints (about 40 hours each) over the past couple of weeks and the filament has a metallic in it that is eating nozzles. I found these and at first, the hole didn't look like it was the right size compared to the factory nozzles. I put the needle in to check and it went straight into the Creality nozzles but wouldn't fit in the Tuparkas. I tried a couple of more times and was able to get it to drift through the hole ok. I was already not happy with that but went ahead and put on in the printer. I did a self level and then tried to print a couple of times and wasn't happy with how the filament was coming out and abandoned two or three prints. I kept moving the nozzle closer to the bed manually and got a decent looking print started. I was still skeptical about how the print was going to work but after more than 24 hours, this is the cleanest print I've had on my machine ever! I suspect that there are two things going on. First, the nozzles from Tuparka have more material. That would make me think they are slightly better at retaining heat--probably it's negligible, but there is certainly more material in these. Secondly, the tip is much blunter. My guess is this is what is making these work so well. The tip is very flat on the end and it seems like it might be "ironing" the filament after it's printed. Maybe it's because the tip is narrower--I really don't know. What I do know is that after 24 hours, I'd normally be pulling gobs of melted filament off the hot end during printing with the Creality nozzles. These are almost clean. Had the drift needle fit through the hole, these would be 5 stars for sure. Having to fiddle with it a bit knocks them down one. But it's saving me a tremendous amount of time with PETG printing over the factory nozzles as I don't need to check on the printer as often to remove the melted mess that the factory nozzles create. I don't do a lot of reviews unless something is really good or really bad and I really do like these nozzles and the best part is I have 40 of them now! Amazing!
J. Vento
Reviewed in the United States on September 22, 2020
So, as the title says I found 1 bad nozzle out of the 70pcs in the kit. I bought this kit because I am currently running 2 printers, Ender 3 pro and CR10S, and wanted to have a variety of nozzles to try as I work on different projects. Also the nozzle on my CR10S was beginning to clog up, right before switching to an all metal hotend, so I figured this is as good a time to try them out as any, and proceeded to switch out my .4mm nozzle for another... After about 2 minutes of trying to get the nozzle started, I pulled it out only to see the threads were munged up (thats a tech term in case your wondering) so I grabbed another .4 and it went in with no issues, and it has been working fantastic ever since. I'll be buying another of these as soon as I need to, they work great for me!!
Recommended Products
