Your cart is empty.
Your cart is empty.From the manufacturer
Built on Decades of Proven Engineering and Manufacturing Excellence
The most discernable shooters in the world—from law enforcement to personal protection—want improved accuracy and precision in any light. This is why so many of them choose Trijicon iron sights and night sights. Trijicon iron sights come in a variety of models—from tritium-powered night sights to fiber sights to u-notched rear sights—for the most popular pistol manufacturers on the planet.
Proven Durability and Accuracy in All Lighting Conditions
There’s a reason so many Trijicon night sights are trusted by local, state and federal law enforcement agencies, as well as the most discerning pistol sports participants on the planet: they’re designed for faster target acquisition in any lighting situation, as well as designed to take a beating and still operate with precision.
Customer
Reviewed in the United States on June 24, 2024
I got these for my newest handgun and they glow perfectly and better in the dark than another cheaper brand orange sights which would glow at first and don't glow anymore and they're not old. Quality over quantity you get what you pay for.
Brian Weir
Reviewed in the United States on June 19, 2024
After a small amount of sanding I was able to press the rear sight on with no problem. Front sight was a snug perfect fit. Great tritium night sight upgrade to the white 3 dot stock sights. Removal of the stock sights took some work but I was able to push them off with patients and persistence.
Jay Clark
Reviewed in the United States on June 26, 2021
I originally bought a set of the Trijicon HD Night Sights for my 92A1, and when I took it out after installing them it shot incredibly low. Verified with a second shooter who had to use the same sight alignment I did to get on target. Went back another time with a Ransom Rest and it took the same alignment to get hits.I bought these thinking they might solve the problem as the HDs are extremely tall, ran into the same issue. Talked it through with Trijicon on the phone, they weren't willing to do anything about it and I couldn't get a refund on either as they had been installed.My M9A1 and M9A3 shot perfectly with stock sights. But for some reason I ended up having to use the absurd combination of the tall HD rear and the short front sight from this set to get this 92A1 to shoot correctly. I never shot it with the stock sights to see if it was off with them and they had already been trashed before I went to the range the first time.I was extremely annoyed with Trijicon as the only help they offered was a sight alignment pdf which gave me info I already knew. I wish Ameriglo still offered Beretta sights as I would of went that route to begin with like I do on all my other guns. After this ordeal I'll never purchase Trijicon irons again.
LAMH
Reviewed in the United States on November 10, 2016
Bought this sight set for my PX4 Storm .45 ACP. Overall I'm very pleased with it. The sights look identical to the factory sights, so no big, ugly, bright and colorful fiber optic sight. The dot visibility in low light is perfect, not too bright nor too dim. Even in a dimly lit space the dots glow visibly. They are also very visible in full light (but don't glow of course).A couple of minor complaints. First of all, the lettering on the rear sight with the Trijicon name is annoying. Why bright white? Why not just stamped colorless lettering? Furthermore, the the lettering has already begun to peel off. I used my fingernail and took care of the rest of it.Secondly, the dots are very tiny, much smaller than the factory dots. Makes lining them up a little slower.
Aleks Hering
Reviewed in the United States on April 5, 2016
The Trijicon HD Night Sights are the bee's knees! My sight picture is 200% better and my target aquisition has sped up almost just as much! The shipping was fast too! Overall im extremely satisfied with my purchase and urge anyone who truely depends on being able to draw a weapon and find a target to get these sights! They are a bit expensive but when your life or the life of a loved one is on the line you'll be glad you have them!
Stlwc77
Reviewed in the United States on September 29, 2015
I don't know why I waited so long to purchase these Trijicon Night Sights for my Beretta Px4 Storm. After purchasing I took them to a gunsmith and he was able to install them without a problem. These sights not only look great but they are highly accurate and have improved my groupings. The sights are well worth the cost so don't hesitate to pick up a set.
wolfmandean
Reviewed in the United States on April 15, 2015
Called Trijicon before ordering, as I had read so much on the internet about Trijicon night sights for PX4 Compacts, the base on front sight not being wide enough, and leaves an exposed gap in the open dovetail of the slide after installed. So called Trijicon, asked for technical support, got customer service, explained in detail the reason I was calling and asked about this BE14 sight. Was told that all those reviews were people using the BE10, and that is why this BE14 sight was produced, (which is clearly even printed on Trijicon's factory package) states this is for the PX4 "Compact". Even with this update from Trijicon, the base of their front sight is still not as wide as the factory Beretta front sight base, and after installation, in which the armorer has it perfectly centered, on the right side, there is still just an ever slight open area in the dovetail. So while Trijicon apparently made a great improvement with this issue, they are still a bit short in this correction. For a product that MSRP's for $173 per Trijicon website and Amazon, it should be correct and perfect, and this should not be this way. Other than this, they are fine.
MikeyMikeMB
Reviewed in the United States on June 27, 2013
Excellent fit & function for 96A1. Does not interfere with draw from M12 holster. Do yourself a favor, whether you're using a sight tool or punch & hammer, break the slide completely down, to include removing the safety/decocker lever. Cut an old leather belt about 18 inches long and wrap it horizontally around the slide (stay just below dovetail notches/sights), securing it with a piece of duct tape or two. Cut excess leather off if you wish. Freeze the slide overnight in the coldest freezer you have access to. Get all your tools together before pulling the slide out of the freezer. Get the slide in the sight tool and/or vise and proceed to replace the sights. Do it fast, but carefully. The leather protects your slide & the freezing contracts the sights just enough to get them moving. I've heard you can put a drop or two of liquid nitrogen (think OTC Dr. Scholl's Wart Remover) directly at the base of the sights and then proceed with exchange.Anyway, great sights, bear to swap out without proper stuff.
Recommended Products
$59.95
$ 29 .99 $29.99