Your cart is empty.
Your cart is empty.Product Description
HHOOMMEE Sanitary Ware
Automatic Sensor Faucet Features:
- Water saving:Water out automatically when you put your hands under the induction zone,water stops when put your hands back.
- Hands free:Touchless,micro-computer control.
- Soft touch:The aerator with technology of air in water,make water been soft touched and no splash.
- Energy saving:Battery power,4AA alikaline batteries, can be used for around 2 years.
Automatic Faucet Parameters
- Power Supply:DC 6V,4AA alkaline Battery(not included),can last for 2 years for family use
- Sensoring Distance(factory setting):15cm
- Deck Hole Diameter:35-40mm
- Deck Thickness:20-30mm
- Flow Rate:8L/Min
- Cartridge Lifecycle:500,000 Times
- Water Pressure:0.05-0.7Mpa
- Switching Time:less than 0.7s
- Low Battery Indicator:Red Led Flash
What's Included in the box
- 1x faucet body
- 2x 9/16 water supply hose, with red and blue mark(red one for hot water, blue one for cold water), the hoses are with check valve inside.
- 1x set mounting accessory
- 1x instruction paper
Touchless Faucet Details
Infrared Sensor
Factory setting sensing distance is 15cm. Put your hands within this distance, water will flow automatically. After washing, move away your hand, water will stop without touching the handle.
This motion sensor faucet will make your washing cleaning and convenient.
Touchless Faucet Aerator
HHOOMMEE faucet aerator with soft water flow,no splash,water saving.
- Maximum lime resistance
- No need to disassemble the aerator for cleaning
- Perfect stream quality
- Very low noise level
- No Damage
Automatic Sensor Mixer
This automatic faucet with both cold and hot water.
There is a small handle on the right with red and blue mark.Turn left to get more hot water,turn right for cold water.
You can set the water temperature in advanve. You don't need to touch the handle next time when you use it.
Sensor Faucet Battery Installation
This touchlesss faucet is powered by 4AA alkaline battery (battery not supplied). Open the top cap of the faucet and put the batteries. Battery can last for about 2 years for family use.
Faucet Installation
Installation Hole and Deck Thickness
The holding stem diameter is 31.5mm. The fixing nut diameter is 41.5mm. The suitable hole diameter is 35-40mm.
The stem length is 43mm. The deck thickness can be 20-30mm.
Faucet Installation
How to Installation Automatic Faucet
- Before installing the faucet, flush lines to eliminate any dirty that have accumulated in hte pipes.
- Put the O-ring into the body
- Tight the screw to the body through the hole,fix the nut with wrench.
- Connect the hoses.
- Before installation,please make sure none of dirt in the pipes to prevent faucet jam.
- Fix the hot water hose on the left and cold water hose on the right
- After installation,please check leakage cases for all connections.Don't allow the supply hoses to twist.
Pratima Rao Gluckman
Reviewed in the United States on July 27, 2024
One of the faucets I purchased, the water pressure is very weak and my contractor mentioned it's a product issue. The seller reached out to me and sent me a replacement and the water pressure is great. Thank you for all the help here. Seller was quick to respond and address the issue and I appreciate that.
bcbn
Reviewed in the United States on October 10, 2024
This awesome faucet is elegant, easy to install and use. Save tons of water and delivers. Good quality and finished.
keg
Reviewed in the United States on January 20, 2024
Update. We were wrong about the water lines. Reducing fittings included in box made the lines correct size. Now installed & we love it. If you are covering a 3-hole sink, do not use base plate they recommend. It is not wide enough. Get one at least 2.5" wide. We found one on Amazon a lot less expensive than local hardware store.
Tere Ch
Reviewed in Mexico on May 29, 2023
Me urge saber cómo se calibra
user-MP1C9F
Reviewed in Saudi Arabia on December 2, 2022
جيد فقط من ناحية استبدال البطاريات ولكن غير واضح كيفية برمجة الحساس
Haxster
Reviewed in the United States on September 8, 2020
The media could not be loaded.
L
Reviewed in the United States on May 6, 2020
the temp control valve is leaking water after 6 months of use. i am in contact with the venodr for solution with step by step instruction on how to fix it. I sure hope they won't give me the run around. I will update every one here if they can stand behind their product.*update - Fredy (reseller) - send me a email and offer video instruction on how to repair the leak - I have request all the part (valve and o-ring) from him and have my repair man perform the repair. Let see if he will do what is right to correct this part. running for 6 months and resulting in a leak is not what i expect from this product. - honestly - for the effort - i think they should send me a replacement unit - and then i can send back my defective faucet.
ED989
Reviewed in the United States on April 5, 2020
I set up a touch-free bathroom. With touch-free soap dispenser, motion activated light switch, touch-free faucet, and disposable paper towels. I got this item because most touch-free faucets costs a lot more money. I got the polished chrome version and like this overall. I did have a few issues:(1) Like the other review said in the pictures, the way it installs in a standard hole with the two hoses on the sides, it is impossible to have it perfectly centered. It is shifted a bit over to the right.(2) The o-ring on the bottom doesn't work well, and you have to be careful to line it up and tighten it down without pinching the o-ring and having the faucet tilted to one side. Also, not sure about how water resistant it is, due to the poor o-ring line up. In addition to the o-ring, I would suggest running a bead of stain-free Plumber's Putty around the hole, to insure a leak free seal. Otherwise, water pooling up on the sink-top surface may find a way under there and drip into the cabinet below.(3) I think the little lever is great for those who know it is to adjust the hot/cold. But for guests that aren't familiar with it being a touch-free faucet, they think that little lever is to turn on the water and start moving it around trying to turn on the water. I wish that lever was a little more hidden or in the back or something, so people wouldn't play around with it.(4) Wish the battery compartment also had an o-ring. The battery compartment lid is just a screw on, and if lots of water was splashed around could find its way into the battery compartment.
C. Stube
Reviewed in the United States on November 17, 2019
Let me start by saying I love the way this faucet looks. It wasn't hard to install either with an adapter from the local big box hardware store. I like the location of the battery box inside the top of the vertical post.It's the functionality of it that I'm having problems with after installing it. If my hand is in the zone where water will land on it coming out of the faucet, the sensor does not see activate. If I move my hand towards the sensor, the water turns on, but when I move my hand back towards the water, it immediately shuts off again. Repeat, hand moves towards sensor..... water turns on, hand moves towards water...... water turns off immediately. Something has got to be done about this! It's impossible to wash your hands!Two things that could make this faucet usable:(1) Making the faucet turn on for a short period after tripping the sensor(2) extending the range of the motion sensor to encompass the area where the water comes outI've sent a message to the seller and I'll report back if a workaround is provided
Recommended Products
$89.10
$ 36 .99 $36.99