Your cart is empty.
Your cart is empty.Product Description
HHOOMMEE Automatic Bathroom Touchless Faucet
Sensor Faucet Features:
- Hands free:micro-computer control, don't need to touch the faucet.
- Energy saving:battery power,4AA alikaline batteries, can be used for around 2 years
- Cold and Hot Water: faucet comes with a water mixere to adjust cold and hot water.
- Water saving:water out automatically when you put your hands under the induction zone,water stops when put your hands back.
- Premium Quality: professional manufacturer with 20 years experience. You can totally trust.
Faucet Dimension
- Overall height: 4.72inch
- Spout height: 3.7inch
- Spout reach: 3.7inch
- Body length:5.75inch
- Body width:2inch
Product Information
- Material:brass
- Finishing:polished
- Number of hole: single hole
- Core valve:solenoid valve
- Installation type:deck mounted
- Water type:cold and hot water
- Power supply:4AA alkaline batteries
- Low Battery Indicator:Red Led Flash
- Flow Rate:8L/Min
- Cartridge Lifecycle:500,000 Times
- Water Pressure:0.05-0.7Mpa
- Switching Time:less than 0.7s
- Battery life span: 2 years for family use
HHOOMMEE Touchless Bathroom Faucet
Brass Bathroom Faucet
Faucet is high grade H59 copper casting with multi layer nickle and chrome plated,lead free.
Aerated stream with soft water flow,no splash,water saving,minumum noise.
Infrared Sensor Faucet
Factory setting sensing distance is 15cm. Put your hand within this distance, water will flow automatically. Remove your hand, water will stop.
This motion sensor faucet will make your washing cleaning and convenient.
Faucet Installation
Faucet is single hole mounted, can be used both for a single hole or three hole basin.
Suitable hole diameter 20-35mm.
Suitable deck thickness 20-35mm.
Water Mixing Valve
- Brass water mixing valve with check valve
- Red for hot water, blue for hot water
- Round handle for switching water temperature
- With 3pcs filter screen
Control Box
The core valve of the control box is the solenoid valve.On the top there's the battery case which requires 4aa batteries(not included), can last for 2 years for family use.
Pay attention to the connection of water inlet and water outlet..
Water Supply Hose
Faucet comes with 2pcs 16 inch water hose. Blue one for cold water, red one for hot water.
The connector thread size is 1/2"-3/8" which is suitable for North American.
Pay Attention
Please note that part 1 should connect to water mixer valve and part 2 should connect to mixing water hose.
Do not install the 2 parts upside down.
- Part 1 is water inlet
- Part 2 is water outlet
Faucet installation Steps
- Connect mixing water hose and mounting stem to the faucet bottom
- Use the rubber ring,horseshoe sheet and nuit to fix faucet on the deck
- Open battery box and put batteries inside,fix control box to the wall
- Install hot and cold mixer valve
- Connect mixing water pipe to the control box
- Connect the conmmand transmission line
- Connect cold and hot water inlet pipe
Dean J Moran
Reviewed in the United States on January 1, 2025
Length of the connectors are too short. I made it work, had to mount the junction at 45 degree angle. The feed line to the sink needed a lot of plumbers tape at the unit also.
H. M.
Reviewed in the United States on November 16, 2024
Faucet was a good price at $47 and came with a drain stop.Drain piece was huge, fits my bathtub drain but not my sink. Unit went in okay, but it leaks a little from the water connection, even with nuts fully tightened and additional materials. It doesn’t have a temp control, but that’s not the problem.It goes off constantly.Unfortunately, adjusting the sensitivity is only possible pre-installation. I would have to dissemble it, assemble it, test it, and repeat to get it right.It’ll stay for now. We’ll see what the water bill is like.
Vserendipitous
Reviewed in the United States on August 3, 2023
The motion sensor works well once you figure out exactly where to place your hands. There are no nobs to adjust water temperature. It's like using a public restroom. Kids won't get burned from water that is too hot.
Mike
Reviewed in the United States on March 13, 2023
This faucet was very easy to install. I love the look of it, and it works flawlessly! It’s so nice having a touchless faucet now!
Chuck D
Reviewed in the United States on February 28, 2021
I purchased close to 40 of these faucets and we are starting to have problems with them and getting no response from the seller SML Products. That is why I am updating my feedback about the product and seller. Seller does not respond and you can't even get parts for the faucets. Don't buy from this seller or this product. The product we received were UpScalet faucets. They looked exactly like the other brand.... if you need to buy do it with caution and purchase the extra warranty.
Army Vet
Reviewed in the United States on August 1, 2020
This faucet cost about half what a Moen faucet would cost. The quality of the hoses and box to house the battery and mixer and the faucet itself were excellent. My only complaint is the hoses between the mixer and the faucet could have been longer to give me more option on where to install the mixer and have easy access to the batteries. Other than that, the faucet has been in service for more than a month without any problems showing up.
Missy247
Reviewed in the United States on July 30, 2020
The media could not be loaded.
Mr. Ed
Reviewed in the United States on July 29, 2019
Going touchless is easy with this unit. The instructions are straight forward. The hot and cold are marked by color and all of the hoses needed are included. Just make sure you can reach the battery unit after the install so you can change the batteries.
Recommended Products
$274.99
$ 99 .00 $99.00