Your cart is empty.
Your cart is empty. High quality PVC rubber,Universal Light seal dust cover with hole.Fit for all Light ;
Designed for Light Kit,keep the Light kit clean and tidy.Save your time to clean the light;
Waterproof &Dustproof housing cover suit for protecting the Light against rain, wind and sand during the trip;
This Dustproof Cover size have 60mm (2.36 inch) / 65mm (2.56 inch) / 70mm (2.76 inch) / 75mm (2.95inch) / 80mm (3.15 inch) / 83mm (3.27inch) / 85mm (3.35 inch) / 90mm (3.54 inch) / 95mm (3.74 inch) / 100mm (3.94 inch) / 105mm (4.13 inch) / 110mm (4.33 inch);
Package:2pcs high quality dustproof seal cover(not include Light ); Dustproof Covers made by soft rubber, it maybe made exterior deformation in transit, but it doesn't affect the use.
ハル爺
Reviewed in Japan on June 17, 2024
物自体はしっかりしていて使用には何も問題ありません。本車体では深さ不足でタイトです。参考にしてください。
M. Ball
Reviewed in the United States on February 14, 2024
It was hard to guess how these headlight dust caps were going to fit my 2012 Terrain low beam headlights. I wanted to share that the 105 mm size fit my Terrain perfectly. They are a snug enough fit that I do not feel it is necessary to add zip ties or other hardware to make sure the caps stay in place.
Guy from TX
Reviewed in the United States on August 15, 2023
Did not fit my 2016 f150. They claimed they can be stretched but it really does not seem made to do that, I physically could not get the caps on and I tried HARD for about 30 mins before deciding to just use the stock ones and cut a hole in them for wiring.The martial of these is also pretty bad, nothing like the OEM ones that are stretchy and rubbery, these came hard glossy and with little to no stretch, I imagine they’d make a poorer air/water seal. Mine were also slightly squished in the box when they arrived. 🤷🏻
enrique tabares
Reviewed in the United States on November 6, 2023
Did a projector with led lights swap on Chevy express van needed a dust cover the original was to small , purchased these an fitted great. Excellent product
Chris S.
Reviewed in the United States on November 18, 2023
I converted a 2011 F-150 OEM halogen housing to LED light (Morimoto 2Stroke 3.0 and DDM Tuning Saber 50W V2). The OEM halogen version has a seal, not a cap, so I need a cap to help protect the LED fan. Unfortunately the LED suppliers do not know the cap size. I measured 85mm diameter OD across the F-150 seal, but the 85mm size cap does not account for any flexing and is simply slides off. However, the 83mm version worked great though and provides a tight seal. Go with 83mm on an OEM halogen 2009-2014 F-150. I believe that’s the same size for the OEM HID cap too.
探検隊
Reviewed in Japan on October 18, 2023
21年9月にこのカバーを装着丁度2年経って、LEDヘッドライトのファンもコンパクト化されてきたので、ライトの買い替えをしました。そこで純正カバーへ戻す際に無惨な姿を確認しました。しかし、2年で¥1000位ならコスパは良いでしょう。これから使用される方は、1年毎に確認はした方が良いでしょうね！
Allen D. Reinecke
Reviewed in the United States on September 11, 2022
I recently replaced my 2021 Ford Escape hybrid bulbs for LEDs. I had seen in a forum that someone also recommended changing the Ford rubber caps (see window ledge photo), to provide more room for the airflow from the integral cooling fans in the back of the bulbs. I found these TOMALL 85mm 3.35-inch Rubber Seal Dustproof Covers for LED Headlight Conversion Kit. At $9 a pair, $18 for the vehicle, they seemed reasonably priced..Each pair comes in a very small box and are scrunched up to fit. I had to lay them out in the sunshine to warm up and recover their intended shape. That was about 98% effective. They don’t look as professional as the stock caps, but they are in the engine bay and you don’t really see them!.The fit on the headlamp housing was not as snug as the stock caps. The stock caps are a tight fit and need nothing to hold them in place. The TOMALL are a looser fit, sliding over the outside of the ring on the housing (the stock cap fits inside and outside of that ring) and they need to be clamped to the housing with a cable tie to stay in place and seal the housing from moisture. There are shallow grooves on inside the molding, which would help seal a tighter fitting cap. These maybe reduce the chance of the cap sliding off the ring.Forget the included cable ties. Put them in your toolbox for something else! They are useless for the application, way too small. The kit includes 8 cable ties, i.e. 2 for each cap, but even then, they are too short. 1 Star lost! ☹Ideally you need a large, 14-inch cable tie. I only had some 11-inch ties, so did have to use two and cut off the excess..CONCLUSION:.These essentially do what they are designed to do – seal the housing and provide more space for the forced cooling airflow from the LED bulbs.They don’t look quite as professional as the stock caps, but being black and in an engine bay, you won’t notice them anyway. The untrained eye would never know they weren’t stock.I can recommend these if you fit LED conversion bulbs to your headlamps. 😊
brian
Reviewed in the United States on June 16, 2021
I purchased these to give a bit more room for the LED headlights in my Ford Explorer 2013 Limited. I could have fit the kit into the enclosure with the OEM dust cover but it would have been a very tight squeeze. These caps allowed for more room and I think it will prolong the life of the LED hardware due to more airflow for the rear fans. The OEM dust covers would have pressed directly on the back of the LED units and wiring may have interfered with the fans. This gives me peace of mind and also makes the installation way easier.
I Break Things For A Living
Reviewed in the United States on December 26, 2021
These do fit if you get the right size. They are a thin rubber. What I can’t understand is why not make them fit the hole on the headlight the same way the OEM dust covers do just with the extra space. The zip-ties provided are to small and trash so have some better longer ones on hand to save time and frustration. The ones provided are short and thin. Buy long small ones before hand. Not sure why the don’t just send longer ones, instead of forcing you to use 4 tiny ones that make it hard to tighten around the cover.
あず
Reviewed in Japan on November 17, 2021
HIDからLEDに交換した際に急遽購入。LED本体が長さがある為、純正カバーを無理矢理付けたら光軸が調整出来なかった。こちらの商品はジャストなサイズで我が家のRKにベストフィットでした！放熱の為にスリットを入れる処理はした方が良いと思います。
Nash
Reviewed in Japan on June 22, 2020
商品のサイズは良かったのですが、付属の結束バンドが短すぎですね。長いのを買って使いました。
Bob Villa
Reviewed in the United States on August 20, 2019
Upgraded to LED headlights in the high and low beams and just needed a little extra clearance on the back of the headlight housing for the LED cooling fans. This fit my 2016 F150 XLT Sport headlights well and had no issues. Only need one per side in my case using the LED bulbs I did. One fit under stock cap, the other did not so used this extended cap.
Verne BEDWELL
Reviewed in Canada on January 24, 2019
Could be thicker, Delivery was excellent (1) day earlier than promised and we are in the north of the Country.A little pricey for what you get but it did the job and nothing was available locally, so I am content!
Recommended Products
$11.99
$ 6 .99 $6.99