Shopping Cart

Your cart is empty.

Your cart is empty.

Titan Fitness Weight Plate Wall Mounted Storage Rack, Angled 4-Peg Design, Olympic Sized Weight Plate Organizer, Rated 800 LB, Anchored Wall Mounted Storage

Free shipping on orders over $29.99

$89.99

$ 35 .99 $35.99

In Stock

About this item

  • Keep your home or garage gym organized and plates off the ground
  • Dual anchor points in a wall stud and floor allow for a high weight capacity
  • Angled design leans against the wall instead of pulling away from it
  • Four post design fits Olympic-sized weight plates - Fits four 45 LB plates per post with room to spare
  • Rubber stopper stops plates from scratching upright - Installation hardware included



Product Description

Premium fitness equipment without the premium cost
Premium fitness without premium cost to live a stronger, healthier more fulfilling life
quality fitness equipment constructed to perform
Extreme value products to help crush your fitness goals
Strong confident and steadfast

Wyte_Rushan
Reviewed in the United States on June 9, 2024
If you have half an ounce of construction ability this a piece of cake to install. Works great! Only 2 cons would be the paint finish scratches off super easy, and when dragging a 45 plate off the rail it peeled the end cap off and I can't seem to pop it back in. BUT... when you compare to a Rogue product it's a no Brainer! Same functionality for a fraction of the price
AndiB
Reviewed in the United States on December 8, 2024
Perfect storage solution for my weight plates. Very easy to assemble and very sturdy. All hardware present and accounted for. I didn’t screw it into studs though. Used the anchors that came with it. I don’t have a lot of weight on it so it’ll do for now.
Brandon
Reviewed in the United States on April 9, 2024
Does a great job with my plates and keeps them off the floor. Takes up minimal space and is really easy to set up. I am really happy with this product!
ljo
Reviewed in the United States on May 9, 2022
I mounted mine to a concrete wall and floor, loaded it up with 500lbs in plates and its totally solid and very space efficient. Couldn't be happier. The most I've fit on a single tier is 180lbs with 4x45lb steel plates + 2x 45lb bumper plates. If it was all bumpers you could probably fit 2x45 and 2x35 but no more than that.
Bubba Fett
Reviewed in the United States on September 16, 2021
The product, once assembled, does the job perfectly. If you mount to studs (either directly or indirectly) then it is as solid as a rock and will carry whatever plates you load it with. Because it bolts (or rests) on the floor, the primary load bearing is not the wall.As a side not, the assembly bolts holes did not align properly from the manufacturer on 1 of them. I had to drill out the top of the hole and it went together fine, but I had to modify it in order to assemble.
Daniel
Reviewed in the United States on February 11, 2020
I installed this in my garage and it took some customization.My garage is non-drywalled. I cut and anchored two support beams between 2 studs and bolted one half of the screws to the stud and the other half to the support. With the anchors on this it needs some creativity to install it properly. The actual screws that come with this are trash, even if you could install without any problems I recommend going to HD and getting a better set. First one I installed was fine but the second bolt head twisted right off with too much torque. Too many bad reviews about screws to ignore. That being said I stand by this product, with 260lb mounted it has zero wiggle. Feels extremely solid and well worth the price. Would absolutely buy again as long as I’m using different bolts. Bottom anchor meant for the floor was ignored and mounted in to a piece of wood for a clean footprint.
Dres
Reviewed in the United States on April 16, 2020
As soon as this arrived I saw the paint on it has been damaged a little (chipped). The part that installs on the wall ripped the box, and must've got bumped up against quite a bit during shipping. This is unfortunate and I'm still trying to work with Titan to resolve this.Aside from that, it's built well and VERY easy to put together. It's solid and I don't see it breaking on me.The bolts to actually put it together work just fine. The anchors to install on a wall when you're not going right into a stud are terrible though. I had them in the wall and once you try and screw the screws in, they begin rotating with the screw. I went out to a big box store and just purchases bolts with toggle anchors. These worked MUCH better. I wish that's what the rack was supplied with, but, nonetheless, less than $10 on these bolts will ensure a good connection to the wall. Same as the bolt for the wall, the bolts to go into the floor don't make much sense. I went and got Tapcom screws and that worked better for my concrete flooring.So, long story short: you'll be able to put it together easily enough with the bolts provided, spend an extra $10-12 for better bolts to install to your wall, and you'll have a rack that'll last a LONG time. I love it.
E Schewe
Reviewed in the United States on November 27, 2019
Received my package from Titan fitness two days ago. The package came in good order and was packaged well. Value to price on this item is excellent for a garage gym. In the end even a couple of minor imperfections I can overlook for the price. For the fact that it's going to be holding weight plates and in my view doesn't need to be perfect. This was easy to put together is very sturdy and sits at a good angle and comes with all the hardware to mount it. It does not intrude into the gym space much at all and looks nice. This is a nice cheap solution for weight plate storage in a small space. If you're thinking about buying this I wouldn't hesitate and the shipping was fast and as always with Titan fitness free shipping it can't get better than that. I also bought the 260 lb bumper plate set from Titan fitness. Very good price point on this item as well fast free shipping no complaints on that purchase either.
Recommended Products