Shopping Cart

Your cart is empty.

Your cart is empty.

TCP Global Air Rust Proofing and Undercoating Gun with Gauge & Suction Feed Cup, 2 Wands - 22' Long Flexible Extension Wand with Multi-Directional Nozzle - Spray Truck Bed Liner, Rubberized Undercoat

Free shipping on orders over $29.99

$29.99

$ 14 .99 $14.99

In Stock

1.Size:Threaded For Metal Cans


About this item

  • Versatile Pneumatic Application Gun: Ideal for automotive rust proofing, undercoating, chip guard, truck bed liner, and various oil, solvent, or water-based coatings.
  • Precision & Texture Control: Lightweight, balanced, and precisely machined for applying different viscosity coatings and achieving various textures.
  • Includes Two 22" Flexible Extension Wands: One multi-directional nozzle for hard-to-reach areas and hollow frames; one straight single-direction nozzle.
  • Aluminum Body with Comfortable Grip & Air Regulator: Features a die-cast aluminum alloy body, easy-grip trigger handle for extended use, built-in air pressure regulator with gauge and a 25-ounce suction feed aluminum fluid cup.
  • Designed for Professional & DIY Use: Suitable for both professional auto body shops and DIY enthusiasts looking for reliable coating application.



Product Description

TCP Global Air Undercoating Gun with Gauge & Suction Cup, 2 Wands for Truck Bed Liner Spray
TCP Global Air Undercoating Gun with Gauge & Suction Cup, 2 Wands for Truck Bed Liner Spray
TCP Global Air Undercoating Gun with Gauge & Suction Cup, 2 Wands for Truck Bed Liner Spray

Chris
Reviewed in the United States on January 30, 2025
This was a great purchase, great value and came exactly as described, No regrets at all and highly recommend. Used it for Coroseal that is a rust inhibitor for inside and outside my truck frame.
jay
Reviewed in the United Kingdom on January 17, 2025
Great bit of kit
Debbie
Reviewed in Canada on September 22, 2024
Great product
丸山 登
Reviewed in Japan on May 14, 2024
つかえますが今一です
mark murabito
Reviewed in the United States on November 7, 2024
I bought it to under coat a truck I bought. Had to thin the under coat fluid out about one quart per gallon but it sprayed well. Spraying at 30psi it covered great with not a lot of over spray. I was able to pull plugs on rocker panels and use flex end that worked great.it worked well.i had to jack vehicle up and put on jack stands and it worked well.
Justin N.
Reviewed in the United States on October 26, 2024
I bought this specifically instead of the ones with the plastic screw on bottles because I thought the all metal construction would be more durable and also because it looked like it would fit easier into tight spots with a container that doesn't hang down as low. Unfortunately, the quality is absolute trash. The connection between the tips and hoses leak like a sieve because they are just loosely slid into the hoses with no seal or clamp whatsoever. The multi-directional nozzle also barely sprays any product, basically making spraying inside cavities impossible with any sort of coverage. Also, the biggest flaw is the product cup doesn't screw on. It just lightly twists on with three little soft aluminum tabs that friction fit into little grooves. These tabs basically completely wear flat after about half a dozen turns leaving the cup with no way to tighten. This results in the cup constantly falling off and spilling product everywhere. Don't waste your time on this thing. It is pretty much worthless. Just do yourself a favor and buy the other style with the plastic cups that actually fully screw on tight.
Kenneth Erik Kohncke
Reviewed in Australia on December 19, 2023
Goes well for the money. Could have a better seal. The regulator is ho hum. But all in all, for the price I think it is ok.
Missing parts
Reviewed in the United States on November 4, 2023
You can use a multivitamin or nature's made/nature's bounty medicine bottle in place of the one they sell. Cut the tube to length for the bottle you are using. Add Teflon or thread tape to threads and tighten down all fittings fairly tight to the point the orings bulge, check to see you have o rings to and add if needed. Add small hose clamp to hose fitting on gun. Add zip tie to outside of hose and nozzle. Buy the appropriate 1/4" female connector for your air compressor. Need a decent size air compressor mine provides 120psi 6hp and worked great. Put bottle in vice and put funnel in bottle and pour fluid film in carefully. Fill the bottle 3/4 full. If over filled it will squirt out hole on bottle lid. Turn regulator valve off when pressurizing and slowly turn regulator on while holding down trigger until atomization occurs and adjust as needed. Refill bottle like stated above when empty. I had to refill it 5-6 times. This product works fine, just need to improve it a little bit. Trigger is fine fill it with hot glue if the play bothers you. This product works great for the price.
CS
Reviewed in the United States on November 30, 2023
To update. The company did replace my sprayer with a new one. Works pretty good so far.I bought this in April but did not have a chance to use it until November.(my bad) I bought this gun to use with Blaster undercoating. The first vehicle I sprayed it worked okay. The plastic trigger handle did not stay centered on the actual trigger button, it would slip side to side not activating the sprayer. I thought okay I’ll live with that. The next vehicle I went to spray I put the cup on the gun and when tightening it, it went past the lock (that doesn’t exist). I ended up duct taping the cup to the sprayer to keep it on so I could finish spraying the vehicle. The thing is a cheap piece of crap! I guess you get what you pay for. I should have tried it right away, I might have been able to return it….Very disappointedI would like to update this review. I emailed TCP directly about this spray gun. I received a response within minutes, once supplying them with pictures, I was told the gun would be covered under warranty and a new gun will be shipped out.GREAT CUSTOMER SWRVICE
Dale
Reviewed in the United States on August 18, 2022
Picked this up to spray Corrosion Free (an oil based undercoating gel) on my truck. While it worked, I found it very frustrating to operate due to 3 issues:1) The trigger has a ton of play, and it often slips off the plunger that actuates the airflow. Especially in the least convenient and comfortable times working on your back under a vehicle.2) The wands do not have any clamps holding the hose on. This is easy to correct but quite silly that we have to.3) The jar doesn’t really lock on positively. There’s three posts on the jar and three slots on sprayer. Once everything gets greasy as it inevitably does, the jar will slip past the detents and come loose as you are attempting to tighten it. There is a sweet spot but again, frustrating.But here’s the deal. The nicer gun and wand combo here on Amazon is $100. I guess I’m willing to deal with some poor design and save the $60. Because really, this is used once a year. And aside from the design snafus, it does work. I got rid of the regulator and used the one on the tank set to 90 PSI. Less bulk. I also fitted a swivel connection to improve maneuverability in tight spots. All told, with the tweaks it works okay. But it is a cheap tool and not great.I used it with my small 6 gal pancake compressor and it did take a little longer letting the compressor catch it’s breath between applications. But it goes to show you don’t need something huge and expensive to do this yourself! I am also pleased with the Corrosion Free and recommend it.
Daniele Silvaggi
Reviewed in Canada on October 2, 2022
Works as it should.