Your cart is empty.
Your cart is empty. Description:
P80 multi-way reversing valve flow 80L / MIN, with high working pressure, compact structure, safety valve and overload valve opening and closing performance, good versatility and so on. Can be widely used in construction machinery, special vehicles, sanitation machinery and drilling machinery.
Specification:
Model: P80, 2 Spool
Nominal flow: 21gpm (80l/min)
Max. working pressure: 25MPa (3625PSI)
Relief valve pressure: 17MPa, Adjustable
Applicable temperature: -20～80℃
Max operating pressure P = 3600psi (250 bar); T = 150psi (10 bar);
A , B = 4300psi (300 bar)
P, A, B ports: G 1/2"
T, N port: G 3/4"
Package size: 50×30×24cm
Gross weight: 10.3kg
Features:
O function, spring reset
Open center system (pump-to-tank flow)
Flexible shaft + one control and two handles (flexible shaft 1.5m)
All spools are standard double acting with spring return in neutral
position
Package Includes:
1× 2 Spool Valve + Cables + Joystick
anne marie ramos
Reviewed in the United States on February 26, 2025
Purchasing this unit required the use of a power external port to connect to the hydraulics, which doesn't seem perfect, but it works great. After buying two different adapters, one screwed in easily and the other didn't work, maybe that's one of the reasons the seller didn't come with an adapter. Everything is extenuating and I like it!
Mike Cornell
Reviewed in the United States on February 26, 2025
I needed to replace the old hydraulic control valve with a new one as it was old and unusable. This control valve has worked perfectly and is worth every penny, this unit has saved me a lot of money and I highly recommend it!
Brannen herrin
Reviewed in the United States on September 6, 2023
Holes are too close together but still works
John Rogers
Reviewed in the United States on November 27, 2023
it does not flow enough fluid to operate the loader on my tractor as it should. the valve works ok just really slow do to flow rate
PEBrad
Reviewed in the United States on January 26, 2023
My Koker loader from 2006 came with a Colfe cable joystick. The joystick broke recently and nobody makes one compatible with the old cables. This was the best deal I could find for a joystick with matching cables. My valve is still good so I will keep the new valve as a spare. The threads on the valve end of the cables were compatible with the original pin adapters and housing which I reused as seen in the photo. The joystick has a locking feature and I adjusted the cables so the valve are centered when the lock pin is engaged. The knob is good sized. It had a couple of dings where it wore against the cables during shipping. I am actually going to reuse the Colfe knob because it has a switch added for my diverter valve. It attaches with a set-screw instead of threads but it fit snugly over the new shaft and seems fine. I went ahead and ordered a power beyond adapter for the new valve. "Power Beyond Adapter Sleeve for P80G Series" was listed as "frequently bought together" and I can confirm it is the correct adapter. It goes in the port marked "N". It is the one where the extended inner seal is almost as big as the port where it threads in. I haven't had a chance to run the joystick yet since I also had a hose spring a leak and still need to install the new one. I will not have a review of the valve itself other than it looks fine.
W. E.
Reviewed in the United States on December 21, 2022
Ordered in March 2022 and had a family member replace the old one on my tractor around the middle to end of September when they came to visit. The product worked nicely for a couple months and then quit working. Was super excited in this product for 2 months and now very disappointed.
kevin
Reviewed in the United States on August 7, 2021
its broke
Steven Cowart
Reviewed in the United States on December 29, 2021
Easy to install and adjust.Comes with a elegant looking wood grain knob for the joystickNo complaints this far!
Recommended Products
$224.00
$ 93 .99 $93.99