Your cart is empty.
Your cart is empty. Product Specifications:
Material:Aluminum
Total Size:139x30x30mm/5.47"x1.18"x1.18"(L*W*H)
Type:4 Ways
Outlet Inner Diameter:12mm/0.47"
Inlet Inner Dlameter:18mm/0.7"
Mounting Hole Diameter:5.7mm/0.22"
Notes:
Please do not use it for other purposes besides fast fluids
Do not exceed the maximum use pressure when using
When connecting the pipe joint and the air pipe, please insert the air pipe into the end
Do not use outside the operating temperature range to prevent the seal material from being worn or leaking
Do not use it in places such as metal powder or dust to prevent malfunction or leakage
All dimensions are measured manually and there may be small deviations.
The color may have different as the difference display, Please understand.
Package Content:
1 x Manifold Block
HG
Reviewed in the United States on August 30, 2021
Needed compressed air distribution block with at least 4 1/4 inch taps and mounting screws locations. This worked!
HG
Reviewed in the United States on August 30, 2021
Needed compressed air distribution block with at least 4 1/4 inch taps and mounting screws locations. This worked!
alan henrich
Reviewed in the United States on November 5, 2021
It looks good, installs easily, but I have not completed the project yet and actually used it. So we'll see if it leaks and stands up to vibration.
alan henrich
Reviewed in the United States on November 5, 2021
It looks good, installs easily, but I have not completed the project yet and actually used it. So we'll see if it leaks and stands up to vibration.
WARREN SANSOUCIE
Reviewed in the United States on April 14, 2021
Great addition for the shop. A little expensive but nice and heavy. A piece that won't break.
WARREN SANSOUCIE
Reviewed in the United States on April 14, 2021
Great addition for the shop. A little expensive but nice and heavy. A piece that won't break.
CelticV8
Reviewed in the United States on August 20, 2020
Spend $10 for the manifold and $20+ for fittings. Uses a 1/2" NPT inlet which has to be reduced down. The body is machined for 1/4" NPT so 1/2" NPT fittings doesn't make much sense. Also, needed complete deburring of passages. Definitely, not usable out of the package.
CelticV8
Reviewed in the United States on August 20, 2020
Spend $10 for the manifold and $20+ for fittings. Uses a 1/2" NPT inlet which has to be reduced down. The body is machined for 1/4" NPT so 1/2" NPT fittings doesn't make much sense. Also, needed complete deburring of passages. Definitely, not usable out of the package.
Leslieallen
Reviewed in the United States on June 29, 2020
I had to send all of these I ordered back... because when I went to use them... none of my parts would properly thread into the header. The plating they used made them way oversize... so much so the threads were oversize.Don't order these unless you plan to take a threading tool and run chase it thru the threads.Also, there is a recess on every hole, which makes the o-ring on your water cooler parts fit loosely.
Leslieallen
Reviewed in the United States on June 29, 2020
I had to send all of these I ordered back... because when I went to use them... none of my parts would properly thread into the header. The plating they used made them way oversize... so much so the threads were oversize.Don't order these unless you plan to take a threading tool and run chase it thru the threads.Also, there is a recess on every hole, which makes the o-ring on your water cooler parts fit loosely.
MrFixit
Reviewed in the United States on May 5, 2020
To be clear, the 4 way block has two 1/2" female pipe openings (one on each end) and four 1/4" female pipe openings on the top of the rail. The one I received is machined great and all pipe threads cut clean and true. I'm very happy with this purchase.
MrFixit
Reviewed in the United States on May 5, 2020
To be clear, the 4 way block has two 1/2" female pipe openings (one on each end) and four 1/4" female pipe openings on the top of the rail. The one I received is machined great and all pipe threads cut clean and true. I'm very happy with this purchase.
Dennis
Reviewed in the United States on October 15, 2020
I used this as an automotive cooling fan switch manifold with brass fittings. Each fitting was wrapped with nylon thread tape. None of the threads were loose. Everything fit tightly and as it should. See the picture.
Dennis
Reviewed in the United States on October 15, 2020
I used this as an automotive cooling fan switch manifold with brass fittings. Each fitting was wrapped with nylon thread tape. None of the threads were loose. Everything fit tightly and as it should. See the picture.
natron31
Reviewed in the United States on December 6, 2019
The "4-way" manifold is milled nicely and the NPT threads accept air fittings without issue. The description is somewhat misleading - there is a 1/2" NPT female fitting on each end of the manifold which wasn't clear. This would be great if the user intended to use this in-line with 1/2" hose fittings. For my intended purpose, it is technically a 5-way and required a reducer bushing to make it compatible with my air lines. I don't mind having an extra port and overall, I am happy to have a nice, clean manifold to accommodate the air tools in my shop.
natron31
Reviewed in the United States on December 6, 2019
The "4-way" manifold is milled nicely and the NPT threads accept air fittings without issue. The description is somewhat misleading - there is a 1/2" NPT female fitting on each end of the manifold which wasn't clear. This would be great if the user intended to use this in-line with 1/2" hose fittings. For my intended purpose, it is technically a 5-way and required a reducer bushing to make it compatible with my air lines. I don't mind having an extra port and overall, I am happy to have a nice, clean manifold to accommodate the air tools in my shop.
Recommended Products
$31.89
$ 15 .99 $15.99
$104.39
$ 48 .99 $48.99