Your cart is empty.
Your cart is empty.4.6 out of 5 stars
- #24,630 in Tools & Home Improvement (See Top 100 in Tools & Home Improvement)
- #79 in Electrical Multi-Outlets
Product Description
Joseph H. Rogers
Reviewed in the United States on February 13, 2025
The photo shows a standard 3 pin grounded plug but the outlet side is 2 pin, no ground. This isn't at all clear if you shop by photos and don't read the description, buyer beware.
Cap Lathrop relative
Reviewed in the United States on January 8, 2025
Due to the 90° orientation of some "wall wart" chargers, I'm using this with a 600W AC inverter in my vehicles with some ham radio equipment and RasPi computers. It works better than I hoped for.
Sawyer
Reviewed in the United States on September 20, 2024
It's a quality harden abs plastic with copper coated brass terminal conductors inside, should be able to run multi applications as long as each load is under 15amp. overall, a good built 3-way power splitter that is no wider than a one and a half inch's and taller than 2 inches off the wall so it should be suitable for crowded spaces.
ANALIA
Reviewed in the United States on August 26, 2024
This wall conector it’s the perfect size and you can charge 4 electronics on it.
Farrow Tech
Reviewed in the United States on December 8, 2024
This flexible multi-plug adapter is perfect for working around obstructed or difficult to reach outlets...AND gives you four more outlets! This is exact what I needed for accessing the lower outlet of a fixture that was otherwise blocked by one of those large plug types directly above it. This solution is a cost-effective, well-made, versatile solution that's ideal for multiple scenarios. Couldn't be happier! Highly recommended.
Sheldon Senzon
Reviewed in the United States on December 10, 2024
Exactly what I was looking for, they were a pleasure to deal with.
Aaron Lew
Reviewed in the United States on November 30, 2024
Works great thusfar... I would like it to have beeen a bit smaller (maybe ⅛" each len & width), but that's not critical.
Vanessa
Reviewed in Canada on April 1, 2022
I needed an adapter for the back of my television which is mounted on the wall. There’s very little space between the wall and the back of the television. A regular plug doesn’t fit. This is perfect!!! It allows me to adjust the angle so I can plug in my Amazon fire-stick. Works perfectly
Michael
Reviewed in the United States on January 29, 2019
This is a switched, three-outlet, two-prong, polarized tap. It is made of hard plastic with a very pleasing glossy white color. It seems reasonably sturdy, though of course can't as sturdy as it would if made out of a different material.The slots seem to offer a tight grip of the prongs of whatever is plugged into them, which is important -- the most common cause of electrical fires is a metal-to-metal connection that is not snug.Note that if your wall outlet has the wider blade slot on the left (ground hole on the bottom, the way that still "looks right" to most of us) then this tap will need to be plugged in upside-down relative to the photos, because the wider blade is actually on the right, as pictured, and not the left. This still works out okay, since the words "on" and "off" are printed sideways, but you end up with an outlet on top of the tap, facing up. You probably want to fill that one first, so nothing falls into it.The slots on the top are offset from the slots on the front, as is necessary for all the prongs of the plugs to fit into the body of this device, which has a pleasingly compact form factor.The switch has a neon indicator light, and of course all three outlets and the light are controlled by the switch. The presence of the neon bulb may make this unsuitable to use beyond 125V (e.g. on the back side of a non voltage converting travel adapter).The ratings on the back are a jumble of inconsistency:"Voltage: AC 110V 60Hz""Output: 15A/125V/1650W"Clearly there is no actual 110V/125V conversion happening... this is just careless labeling mixed with some bad math, since the 1650W figure is actually derived from 15A@110V rather than 15A@125V. Only the current rating is particularly relevant, but I haven't yet done yet tested to see how warm the device gets when loaded to 80%.There are no markings to indicate UL, CE, or ROHS. There's a web site mentioned on the back of the device, for Yuyao City Qizhou Electrical Appliance Co., Ltd. It isn't clear whether this is simply a third-party manufacturer used by Sycon or whether Sycon is a brand of this company.
Recommended Products