Your cart is empty.
Your cart is empty.Product Description
All products are made in Japan
SUIZAN products are made with care by master craftsmen in one of Japan’s towns known for its craft-making tradition with a history of over 100 years.
What Is a Japanese Pull Saw?
Japanese saws cut wood with pulling force, not pushing force. It can cut accurately with less effort.
About Japanese Flush Cut Saw
The best flush cut saw for trimming dowels. The blade without "ASARI" gives a clean cut.
It also works for wood plugs, wooden nails, splines, inlays.
Our Brand Ambassador
"If you are a fine furniture builder, woodworker or a just DIYer, a SUIZAN saw is going to have a great place in your shop."
- Jonathan Katz-Moses
-
0.012" Thin Blade
The blade is 0.012" thin and highly flexible. It fits where you want to cut.
-
No Damage to the Workpiece
The teeth go straight out of the blade at zero set. It can cut only the excess portion cleanly.
-
Ideal for a Variety of Woods
Double-edged blade with two types of teeth, specially designed to cut both softwoods and hardwoods.
-
Sharp and Heavy Duty
High-quality Japanese steel can provide razor-sharp cut, high durability, and wear resistance.
-
Fits Comfortably in the Hand
Handy size and easy to use. Suitable for children to work as well. Can be stored in a small space.
The point of using a Japanese saw is to "cut with pulling force". Instead of pushing hard to cut, apply a light force when pulling and relax when pushing, so that you can cut smoothly without getting tired even after long hours of use. Feel and enjoy SUIZAN's authentic Japanese saws.
Flush Cut Saw 5 in
Flush Cut & Ryoba Line Up
| | Japanese Steel | |
$22.80 | Price | $39.80 |
5 inch | Blade Length | 7 inch |
0.012" (0.3mm) | Blade Thickness | 0.008" (0.2mm) |
0.012" (0.3mm) | Kerf Width | 0.008" (0.2mm) |
17&25 | TPI | 30 |
Asari (Setting) |
| | Japanese Steel | |
$22.80 | Price | $25.80 |
5 inch | Blade Length | 6 inch |
0.012" (0.3mm) | Blade Thickness | 0.016" (0.4mm) |
0.012" (0.3mm) | Kerf Width | 0.02" (0.55mm) |
17&25 | TPI | 17&20 |
Asari (Setting) | |
| | Japanese Steel | |
$22.80 | Price | $44.80 |
5 inch | Blade Length | 9.5 inch |
0.012" (0.3mm) | Blade Thickness | 0.02" (0.5mm) |
0.012" (0.3mm) | Kerf Width | 0.03" (0.8mm) |
17&25 | TPI | 9&15 |
Asari (Setting) | |
- Flush Cut Saw 7 in
- Ryoba 6 in
- Ryoba 9.5 in
SHWAXX HYDRATE & STYLE
Reviewed in the United States on February 4, 2025
This is the perfect mimi saw. I am able to cut with extreme precision!
Customer
Reviewed in the United States on February 27, 2025
Great quality. Ease of use. Great functionality.
Greg
Reviewed in the United States on February 26, 2025
Great saw! If you are careful and go slow, you can get a straight cut with it. But it's really really tough. I'm working on some expensive material, so I wanted a very fine, thin cut. This saw gave exactly what I was looking for.
Masquerade
Reviewed in the United Kingdom on February 16, 2025
Several months ago I under took a improvement project of replacing my banister, spindles, rails and so on. This saw was perfect for the precision cuts required and for flush cutting dowel into Newell posts, amazingly so.Double sided saw with one side for soft wood and one for hard wood. Very easy to use, comfortable to use also, a good size handle makes it less annoying and tiresome to cut and being a fine saw the blade flexes nicely but never gets damaged so is sturdy under pressure and it comes at a good price, a price I think is well worth it.I highly recommend it.
shawn
Reviewed in the United States on February 15, 2025
I used the saw today and was pleasantly surprised, you would think for the cost it would be cheaply made or about as sharp as a spoon. But no the build quality was excellent and sharp as can be and cut super smooth with little effort. Would 100% recommend buying this saw!
Mark D
Reviewed in the United States on February 12, 2025
This saw blade makes it super easy for flush cuts when installing bow tie inserts into cracked live edge projects. The blade is super flexible and is perfect for making precision cuts. Perfect!
DJB
Reviewed in the United States on August 20, 2024
Saw is small, very thin, and cuts well. Handle is comfortable, and worked nicely for the job I had to do. It is a bit too flexible, once it bends just a little where the blade goes into the handle it never cuts perfectly straight again.
MG
Reviewed in the United States on June 23, 2024
The blade on this flush-cut saw is paper thin, so it can flex to get flush with your project face to trip off dowels or overhangs. Because there is NO offset to the teeth, they don't damage the face of your project.This is a Japanese PULL style saw, meaning it cuts on the pull back, NOT the push. This takes a couple of minutes (literally, it took me about 2 minutes) to get used to, but once you do, the motion is natural and easy to control.Add this to your tool kit, you won't regret it.
Etienne Gallant
Reviewed in Canada on March 28, 2024
I am delighted with this simple saw. It helps me cut flush the plugs that hides those hideous pocket screw holes. I manage to cut them very flush without barely « scratching » the surrounding material. A quick wipe with a sandpaper finishes the job nicely. It’s flexible enough to reach tight corners and perform its given task everytime. The price is really good too. I must have cut 150+ plugs and it still cuts like new. Highly recommended to fellow woodworkers and carpenters in the trade.
カスタマー
Reviewed in Japan on March 17, 2024
軽くて切れ味も良くとても使い易いです。
Carlos Rodriguez
Reviewed in the United Arab Emirates on September 19, 2023
Very satisfied with this flush cut saw, its very easy to use and leave no marks whatsoever. I'll definitely recommend it as a must tool for your DIY workshop
DocDedicated
Reviewed in the United States on August 1, 2022
I want to start this out by saying that I did not buy this saw because I needed it. This was bought solely based on seeing a friend of mine use one as well as my favorite YouTubers. I have waiting this long to review it because I wanted to use it on different materials and get past the learning curve.First and foremost...the learning curve. Get ready because there is one. Having grown up using a push saw for things, I figured that going to a pull saw would be easy. Not entirely. Pushing a pull saw can and will cause the blade to bend under pressure. However, take your time and use some scrap wood. It honestly only takes a few strokes to get the hang of it. Every now and then you will try to push it but the more you use it, the less that will happen. THEN, you will wonder why it took you so long to go to one.Secondly, this little saw can cut! I have used it on dowels, board trimming, cleaning dados and cutting Kaizen foam. It is extremely sharp and makes quick work of what ever you are needing. The result of the cut is smooth and requires very little sanding. Make sure to pay attention to the hardwood/softwood sides of the saw. The thin blade curves when you need it to without gouging the surrounding surface. Given the thin blade, the handle was my worry. The handle is easy to hold and allows you to make great cuts with little effort. A death grip isn't needed. Let the saw blade do the work and you will also be amazed.Overall, this little saw has sold me on pull saws. I will be ordering other sizes and styles of Suizan saws.Like the other reviewers have stated, I love it and don't know why I waited so long to get one.
ENG.Bader
Reviewed in Saudi Arabia on December 27, 2022
سيئ سيئ
Recommended Products
$62.99
$ 28 .99 $28.99