Your cart is empty.
Your cart is empty.Product Description
Nema 17 Stepper Motor 0.4A 26Ncm
- Reliable and Stable Performance
STEPPERONLINE focus on the quality of stepper motors and minimizes the rate of defective ones, which ensure that customers can get the most reliable and stable stepper motors.
- Low Noise
1.Use excellent materials; 2. Reasonable stepper motor design structure 3. High Precision motor assembly, which makes STEPPERONLINE' stepper motors stand out by providing quieter and smoother operation
Motor Dimension
Warning
Make sure the motor connect to a constant current or chopper drive controller before you test motor. Connecting the motor directly to a power supply will destroy the motor.
STEPPERONLINE
High Quality with Global Standards
Flexible Customization
MonkeySue
Reviewed in the United States on June 27, 2024
Overview: Good low-range (strength and current) stepper.Packaging: Motor was surrounded w/ protective foam padding, inside light-wt cardboard.Nice addition: A product datasheet was included.Functionality: It worked as expected. 200 steps per rev. It was not noisy: I tested at 75rpm (12v, 50% duty cycle, current limited at 200mA).Electrical specs: Each coil was 30.0 ohm, matching the datasheet. At 12v input, this resistance is consistent w/ a max output of 400mA (Ohm's law), matching the datasheet's current max.
Dennis Gentry
Reviewed in the United States on December 20, 2024
It’s a stepper motor. It steps. It draws the current it’s supposed to for (estimated) the torque it produces. Fit and finish are fine.
Kenkit
Reviewed in the United States on December 1, 2024
I think it needs more amps but I tested with smaller power supply. Delivered on time,
Ralph
Reviewed in the United States on October 18, 2024
I am using this stepper motor to focus a very expensive telescope remotely. The motor is smooth and responsive. It also has plenty of steps to allow me to get precise movements. I have had no issues or complaints with this motor. I was able to hook it up to my ESP32 with driver board and it operated perfectly on the first attempt. I recommend this product.
eric N
Reviewed in France on September 30, 2023
j'ai acheté ces moteurs pour les utiliser avec un adafruit motorshield et une arduino uno. apès un premier test ces moteurs font parfaitement le job, contrairement à d'autre moteur NEMA non compatible.
Pascal
Reviewed in Germany on January 5, 2022
Was soll ich sagen? Lieferung erfolgte schnell. Schrittmotor ist angenehm leicht und belastet die X Achse nicht auf meinem Ender 3. Habe vergessen die Einstellungen in einem Board zu ändern und habe den Schrittmotor mit 1.2 Ampere bestromt. Was dazu führte, dass der Schrittmotor so heiß wurde, dass das Filament schon vor dem Extruder schmolz. Der Schrittmotor hats überlebt und funktioniert einwandfrei.Käufer daher darauf achten: Das gute Teil hat nur 0.4Ampere.Durch den Kauf habe ich mich dazu entschlossen weitere Stepperonline Motoren zu kaufen und meine alten Ender 3 Schrittmotoren zu ersetzen.
Matthew
Reviewed in the United States on November 9, 2021
It was the perfect replacement for the motor on my Afinia H479 3D printer. In order to replace the clogged nozzle of my 3D printer it required a complete rebuild of the extruded assembly, but I deeded a motor with the exact same specifications. This motor fit the my needs perfectly and saved me $100.
Andy
Reviewed in Germany on November 10, 2019
Ich betreibe den Motor an meinem Direkt-Extruder mit einer 1:3 Untersetzung direkt am Hotend. Eingestellt auf 0,3A kann man die Welle am Motor nicht mit den Händen anhalten. Er hat deutlich mehr Drehmoment als erwartet, trotz derkurzen Bauform und der geringen Windungen in der Spule. Würde jederzeit wiederStepper von Stepperonline kaufen. (Auch wenn diese minimal teurer sind als Bei Ali & Co)
Placeholder
Reviewed in the United States on March 24, 2017
Stepper Motor works great as needed with coding from Ardunio machine. I will say that you will need the connecters for the cable since it is straight wires. The wires are about 6inchs long depending on how you strip them. I needed to strip them a bit more than they came for my needs and then I needed to find connectors to make the cables longer. the motor does get hot quick I do recommend the stand that they suggest to pair it with but again you will need screws 4x40 for the mount.
Vamp
Reviewed in the United States on April 29, 2017
I like the product, unfortunately it was a little slower than what I needed. I was only able to get about 80 rpm... I had difficulty finding a max speed for "any" stepper motor but that would be a nice detail to provide.
Chris S
Reviewed in the United States on October 22, 2016
This stepper motor is great and decently priced. It feels and looks high quality, and I have it running on my desk right now next to me. I was most impressed with the packaging. Normally when I buy electronics on Amazon, there is little to no care for packaging and I spend a few minutes anxious to see if my newly ordered parts are functioning. This seller sent mine in a box inside a box, with a perfectly sized sturdy foam insert to protect the motor.The only complaint I have with the motor is that the cords could be longer. Mine are about six inches. But honestly, soldering on additional cords wouldn't be troublesome at all.All in all, definitely worth the money.
Recommended Products