Your cart is empty.
Your cart is empty.The 6U 12 inch deep wall mounting bracket for patch panels delivers a sturdy and dependable equipment storage option, allowing you to wall mount data/IT equipment for a more efficient and accessible operating environment. It’s the perfect solution for areas where space is at a premium like SoHo (small office, home office) environment or space limited server room because it doesn’t take up any floor space. The mounting bracket features an all-steel design and is suitable for mounting patch panels, or other slim 19in equipment to a wall, and to organize cabling or equipment in your network closet, wiring closet, back office or IDF. The sturdy steel construction is especially helpful for durability in harsh environments. Also, because the open frame wall rack's mounting holes are positioned 16-Inch apart, it exactly matches the standard drywall construction framework to ensure simple and secure wall-stud anchoring. Cage nuts and screws are included with the wall-mount bracket, to save you the hassle of sourcing separate mounting hardware. The wall mounting bracket for patch panel is backed by lifetime warranty and free lifetime technical support.
IT Guy
Reviewed in the United States on January 17, 2025
A sturdy rack that was easy to install and comes with accessories! If I could give it 4.99 stars I would. Almost perfect. Other reviewers complained about the screws and stabilizer bar. The included screws seemed a little short for going through sheetrock and then into wood. They did not go very far into the wood, but they held and would probably be OK for lightweight items. I happened to have longer 1 1/2 inch screws in my toolbox so I used those instead. The other weird thing about the screws is they are wood screws, the instructions say they are only to be used with wood, the holes are spaced for wood studs, but why were there are also some blue drywall anchors in the bag with the screws? The stabilizer bar does intrude into the top rack position. However, that's where I located my patch panel and the wire holder bar clears it - see picture - had no problems zip-tie-ing thick CAT 6A to it without removing the stabilizer bar.
Stefan Neumann
Reviewed in Germany on January 10, 2025
Ich habe bei mir unten im Keller das 6HE Rack an der Wand hängen. Neben meinem Switch und Router habe ich auch von Thingiverse Rackhalter für meine Mac Mini ausgedruckt. Passt alles. Schrauben sind dabei. Leider hat sich bei mir in der Zwischenzeit so viel HW angesammelt, di eich in ein 19" Rack stecken könnte, dass die 6HE zu klein sind. Was sagt mir das.... kaufe richtig, dann kaufst Du nur ein Mal. Dafür kann das Rack aber nichts. Es ist gut verarbeitet und ich bin sehr zufrieden damit.
Pedro
Reviewed in Spain on May 3, 2024
Fiz umas obras e aproveitei para adicionar vários cabos CAT6. Usei esta rack mural para terminar todas as conexões e meter um switch + régua de energia.Bastante rígida e forte, tem o problema de riscar facilmente. Eu estou com a rack adicionada entre o tecto e o tecto falso e raspei um pouco no tecto e deixou uma ligeira marca.De resto estou perfeitamente satisfeito com o produto.
Howling Wolf
Reviewed in Canada on May 11, 2024
Very sturdy and easy to mount. You can put it on a flat surface it you instead of mounting it to the wall. Great for power conditioner. Would recommend it.
farao
Reviewed in France on December 28, 2024
Cette petite baie ouverte est très bien, surtout au prix achetée.Je recommande
DOMENICO NOCETI
Reviewed in Italy on December 20, 2024
buon rack, nel mio caso utilizzato a muro per uno switch. Versatile e soprattutto con un minimo di manualità può diventare "multiuso".
C.
Reviewed in the United States on October 9, 2023
The StarTech.com 6U Wall Mount Network Rack - 14 Inch Deep (Low Profile) is a great compact rack with enough room for a simple network setup. Fits in small spaces either on a shelf or even mounted on a wall. Clean and simple. One piece unit, no panels or parts to put together. Finish is very good (nice paint, edges not sharp, not plastered with branding labels). Came with hardware to get started with attaching shelves or components. Other manufacture items (i.e. shelves, switches, patch panel, power bank, etc.). Packaging was great with the unit securely inside a heavy card box. The next rack size up is also a very nice and compact enough.
Michael
Reviewed in the United States on September 15, 2022
Having just installed some of these in a closet, the 6U versions work great: the price is excellent, they are lightweight and easy to hang by your self, they include screws and cage nuts, they are deep enough to handle all but the deepest network gear, and they are sturdy enough to do the job. I also like that they have holes for the reinforcing bar in both the top and the bottom, so you can move the bar to the opposite side and then flush mount two 6U racks on top of each other. For the money, I haven't found any that even come close.
Customer
Reviewed in the United States on May 24, 2022
Not sure why, but was expecting some assembly when it arrived. I was pleasantly mistaken. Came fully assembled, and more specifically everything (except for removable crossbar bar) was solidly welded. Crossbrace does interfere with top slot for anything deeper than a few inches but it’s easily removed and in my opinion unnecessary if you have a 1u product properly secured in the top slot anyway. Crossbrace can be moved to lower side of case in four pre-existing holes. All six slots are numbered. My only complaint would it comes with 3 sets of screws/retainers for mounting your hardware into unit. Would be nice if they’d just go ahead and provide enough screws/retainers for all six slots rather than just three of them. Mark the MSRP up about $0.99 and they’d cover their cost of providing them. I’m OCD, so having all the visible screws/retainers matching would’ve been nice.
MrKilt
Reviewed in the United States on February 7, 2020
I love almost everything about this rack. Not too big, not too small, feels sturdy, looks good. Using this for a home network with LAN drops in every room. The open design worked well for my purposes. My biggest issue was the mounting itself. First on that, it does come with M5 (not M6 as described) cage nuts and bolts. I was mounting this to some open studs by myself which is always a little awkward. Anyhow, the provided wood screws’ heads were exactly the same size as the holes in the back of the rack. This means that you can’t screw in the wood screws and place the rack over them and slide it in to place. You would HAVE to have someone else hold it in place while you screwed it in. I also managed to strip 3 out of the 6 provided so I went out a bought #10 x 1-1/2in screws to replace the originals. They worked perfectly. I was able to slide the rack right over the top of them which made the mounting take all but 10 minutes with 9/64 pilot holes. After it was mounted, everything is perfect and beautiful.Pros: Cost, value, aesthetics, size, prime delivery, relatively light weight, sturdy.Cons: Hardware (both M5 cage nuts which should have been M6 as well as the awful wood screws)
Eric Beaty, Author
Reviewed in the United States on July 4, 2019
I bought this rack unit because I've started to get some new gear for my personal music/recording studio. I currently have an Avid Eleven Rack and a BBE 362 Sonic Maximizer as rack-mount effects.Let me say this unit is a beast and sturdy as a tank. As shown in the pics, it holds my rack FX perfectly with three additional spaces leftover (the 11 Rack uses 2 spaces all by itself) and still has plenty of room to hold my old Mac Mini and my Behringer audio interface (U-Phoria UMC204HD). The top is open, but I found a perfectly sized spare shelf I had to place my HD monitor on top of the whole setup.The rack unit comes with the stabilizer bar already assembled and everything ready to go. In the fairly large box it came in I received the rack unit, a one-page instruction manual in a plastic binder sleeve, and all the necessary accessories bubble-wrapped and zip-tied to the unit itself. Everything I needed, in other words—with plenty of space for cord management and airflow in the back of the unit.Included are enough rack screws, clip nuts, and washers to install 3 or 4 rack-mount effects. It would be nice if they also included enough for the rest of the unit's shelf space (6 rack FX in all), but it's definitely not a deal-breaker and not worth the removal of a star rating.If you're looking to get into rack-mounted FX for yourself, give this bad boy a try. You won't regret it.
Recommended Products
