Your cart is empty.
Your cart is empty.4.6 out of 5 stars
- #93,245 in Patio, Lawn & Garden (See Top 100 in Patio, Lawn & Garden)
- #4 in Pool Diving Boards
SR Smith Bolt Kit, Stainless Steel. For use with: 6ft, 8ft, and 10ft Diving Boards. Product Includes: (2) 1/2" x 4-1/2" Stainless Steel Carriage Bolts. (2) 1/2" Stainless Steel Lock Washers. (2) 1/2" x 2" Rubber Mounting Washers. (2) 1/2 " Stainless Steel Hex Nuts. (2) 1/2" x 2" Stainless Steel Flat Washers. (2) White Plastic Recessed Mounting Washer Assembly.
David Linnane
Reviewed in the United States on March 14, 2022
Quality of item was superb! Delivery was exceptionally quick. The packaging was very, very nice.
Arcman13
Reviewed in the United States on August 13, 2021
The flat washers that were supplied were to big .I had to replace with smaller ones.They would not fit in the board mold.
Mooie
Reviewed in Canada on August 4, 2019
Worked great
H and H HONEY
Reviewed in the United States on July 19, 2019
WE haven't been able to use our diving board the last 5 years, since the bolt snapped in two from my brother using it one summer. The house is 30 years old so we assume the diving board is as well. Took us a while to find the correct part as we were clueless. Anyway this seems to be the part and it fit right. Hubby replaced all the old bolts and those snapped as well during removal.MY kids are thrilled that can actually jump off the diving board and it has seen tons of use this summer.
Amelia H
Reviewed in the United States on June 30, 2019
I ordered a diving board anchoring set of bolts. Item came sooner than expected and was exactly as described. Worked like a charm and we’re jumping in the pool.
George D. K.
Reviewed in the United States on May 16, 2019
As many who have reviewed before, it's overpriced, but then you don't have to go to multiple sites/locations to put the kit together yourself; trade-offs. This kit had everything that I needed, and my original bolts were very much like those shown in pictures below; heavily rusted and had to be cut off. I also replaced the 1/2" brass nuts with Stainless Steel AND bought some anti-seize compound. Overall, this product quickly satisfied my needs...
Angelo
Reviewed in Canada on August 18, 2018
Exactly what i needed but i reduced the 5 star rating to 4 because the cost is excessive for this.
Errol
Reviewed in Canada on July 8, 2018
Very expensive for 2 stainless steel 1/2 x 3 1/2 carriage bolts and some washers but delivery was prompt and the board went back on its base easily.
Canon Shooter
Reviewed in the United States on June 1, 2017
A bit pricy, but worth it. I had considered just replacing the bolts by going to big Orange or blue, but the dont identify the grade of the bolt. Going cheap for the bolt was not an option. So I bit the bullet to buy this whole kit, thinking I was not needing anything but the bolts. Wrong.Turns out there was no way I was going to get the rusted bolt out of the white plastic surface mounts. And the under board bolt caps were both cracked. And all the rubber washers were all compressed/warped/etc - generally unusable. The only part that was re-usable were the two nuts and metal washers - which I used inside the flyte deck, as two of those nuts had rusted.So in the end, I used every part in this kit. Glad I ordered it. 4 stars just because the price should be in the 30 buck range, not 50.
eanthonylch
Reviewed in the United States on July 20, 2014
Perfect OEM replacement for the bolts on my board. The original carbon steel bolts were about completely rusted through, and the stainless bolts are a real improvement in product. Only proviso: it should come with a small tube of anti-seize compound (which the instructions direct you to use since the bolts are stainless steel and the nuts are bronze). It's not something that most folks have sitting around. I installed the bolts without it, which is fine but means that if there is a need to remove the board, the nuts will likely be sacrificed.
fishpapa
Reviewed in the United States on October 17, 2013
These worked perfectly. Don't over torque them. They need to let the board bend and spring. I replaced my board bolts and fulcrum after 35 years. I should NOT have waited that long. My old bolts were zinc coated steel and after I removed them discovered they had disolved to less than 1/2 their original diameter, both breaking during removal. There's a lesson there. I am going to buy another set and inspect for the proper replacement time.Be safe! Inspect your board's bolts! Don't wait like I did. Lucky nothing happened......
Recommended Products
$1,347.95
$ 99 .00 $99.00
$563.98
$ 99 .00 $99.00
$1,258.99
$ 99 .00 $99.00