Your cart is empty.
Your cart is empty.Product Description
excellent investment to cabinet shop
Advantage of the insert router bit
The insert router bits are an excellent investment for cabinet shops that produce work that requires repetitive router function as the cost of the carbide knives will bring substantial savings over time to the cabinet maker.
Professional Spoilboard Surfacing Router Bit
Perfect for quick material removal on large areas leaving an excellent finish on the surface.Ensure perfect cutting tolerance, balance and excellent concentricity, has good resistance to bending or damage, and provides you a more stable processing.
Extensive adaptability
This flattening router bit is perfect for wood slab flattening, bottom cleaning, resurface or plane the top surface of spilboard. Used on CNC and other automatic routers as well as hand-held and table-mounted portable routers. Suitable for soft and hard woods, MDF, plywood, laminate, and etc.
Well-crafted SpeTool Spoilboard Surfacing Router Bit
Cost-Effective Design
The blade can be rotated or replaced with a new blade when the 4 edges are dull, instead of replacing the whole bit.
Superior Carbide Insert
2.2mm insert thickness provide a long using life
35degree cutting bevel for smooth cuts
YG-6X insert helps increase cutting life
Premium Surface Router Bit
With good bending to provides more stable processing.Perfect for quick material removal on large areas leaving an excellent finish on the surface.
High-quality ATS Coate Process
The ATS-coated carbide insert enhances durability, offering a tool life up to 2.5 times longer than uncoated options.
RP
Reviewed in Canada on February 10, 2025
I use this with my Bosch Colt unit... Just take your time and this bit will provide a very good cut
D. Ho
Reviewed in the United States on January 8, 2025
I'm using this bit on Maple and it really does cut through wood like butter. Have a lot of routing to do, so my only regret is that I didn't get a bit with the additional replacement blades
Ben Kors
Reviewed in the United States on September 12, 2024
I was trying to test the bit on my desktop cnc, to see how clean it cuts and I accidentally set the depth of cut to .4 of an inch instead of .04, needless to say it is a powerhouse bit that cut straight through without hesitation.
Darrin
Reviewed in the United States on September 12, 2024
I read the review CHECK THE SCREWS so I did just that. Sure enough, one side of the bottom inserts threads is badly machined. Maybe two threads at most and even they're not in very good shape. Shrapnel anyone? Maybe that's why it's now on sale for thirty bucks, trying to unload defective stock.
Reviewer 101
Reviewed in Canada on July 30, 2024
Flattened a large slab (about a 3 x 5 foot piece of fir) with this, surprised it stayed so sharp and ran true. Also replaceable bits are available
Robert Lowe
Reviewed in Canada on May 19, 2024
Works awesome for cutting spoil board on my 4030
Claudia Babb
Reviewed in the United States on May 15, 2024
The finish on the wood is very smooth. It’s about the same as sanding with 120 grit.
Glen M. Ternes
Reviewed in the United States on February 29, 2024
Leaves small ridges on surface of wood. Not real bad just enough so you have sand more than I think is reasonable
Randall Reyes
Reviewed in the United States on December 3, 2024
Used it to resurface a workpiece and it did a great job.You need a dust boot and vacuum system, there is alot of dust.
Zachariah Bongle
Reviewed in the United States on December 26, 2024
Does a great job surfacing various hardwoods.
Sketch
Reviewed in the United States on April 16, 2024
Got the 1 inch size because I had smaller grooves to make in the bottom of a table for the base to reside in. Very sharp, no tear out and was able to use my palm router on my slab jig. I will be ordering a couple more SPE bits including a bigger bit like this and the huge flush trim bit!
Mathieu Leroux
Reviewed in Canada on July 6, 2022
This 1/4” shank, 1” diam bit is of same great quality as the ‘higher-end’ Amana or Whiteside bits. The carbide inserts are surprisingly sharp, and priced VERY competitively. I would recommend this for ANY hobby CNC users like me. I use this on my Onefinity Journeyman CNC.
CodeHead
Reviewed in Canada on December 29, 2022
I have used this surfacing bit on two projects so far, each about 9x9 inches. It worked perfectly. I would highly recommend it.
Recommended Products