Your cart is empty.
Your cart is empty.Spectre air intake systems are designed to increase horsepower and torque in your vehicle, while also working to protect your engine from harmful contaminants and debris. Each air intake system comes with a washable, reusable, low-restriction Spectre air filter, a polished aluminum intake tube, and a black powder-coated heat shield. Spectre air intake kits include the necessary rubber boots, velocity stack, stainless steel clamps, and all necessary hardware for an OE fit and finish. Vehicle Fitment: 2019 CHEVROLET Silverado 1500 LD; 2015-2019 CHEVROLET Suburban; 2015-2019 CHEVROLET Tahoe; 2019 GMC Sierra 1500 Limited; 2015-2019 GMC Yukon; 2015-2019 GMC Yukon XL; 2015-2018 CADILLAC Escalade; 2015-2018 CADILLAC Escalade ESV; 2014-2018 CHEVROLET Silverado 1500; 2014-2018 GMC Sierra 1500; 2015-2018 GMC Yukon Denali; 2015-2018 GMC Yukon Denali XL; 2014 GMC Sierra Denali
Jim S.
Reviewed in the United States on April 30, 2024
The unit looks great and was easy to install. I did watch a YouTube video though. I had to reroute my windshield washer hose. When I would close the hood, the heat shield pinched the hose causing it not to work. Other than that I'm pretty happy with it.
Rds
Reviewed in the United States on April 27, 2024
Well made but too many clamps, not hard to install I didn’t like the sound when gas it up
RT
Reviewed in the United States on November 11, 2023
This intake is great but the directions are terrible and out right wrong in some steps so I have included picts of the mounting spots in your 5.7 tundra. If you have any kind of mechanical experience this is an easy install. This is the 2nd after market intake I've had in my truck and this is defiantly an upgrade at half the price of brands such as K&N or Injen which is what I had. The plumbing on this unit is wider in diameter and less restrictive which pairs nicely with the heat shield which luckily worked with my after market hood. I will say the elbow on my Injen was powder coated steel and the elbows on this seem to be a lighter aluminum but given the purpose it doesn't affect the performance. To put things in perspective I do have true duel exhaust on my truck and the Injen unit did help with a deeper "throaty" sound and performance but this intake from spectre is a step up for sure. I hope the picts help!
Brian Genson
Reviewed in the United States on April 10, 2023
Easy to install and wow what a difference it makes. Great product
Mark Sandwith
Reviewed in Canada on January 8, 2021
works as advertized and easy to install i had to cut down the metal shroud a little because it hit the hood other than that great product
Travis Bentall
Reviewed in Canada on November 17, 2020
Amazing for the price changed the tone completely on my 07 Toyota Tundra
Tyler
Reviewed in Canada on June 28, 2019
Sounds good was easy to install
The Duck's
Reviewed in the United States on February 27, 2019
So easy to install (20-25 mins) and fit exactly like it should. High end products! And best of all she’s getting 15% better gas mileage and Sounds great! All Tundras should have it!
maribeth
Reviewed in the United States on January 5, 2019
I installed this intake on my 2010 Tundra double cab 5.7 flex fuel. It went on quickly and easily. I paired it with a dual exhaust system and have noticed a considerable power increase that made my old truck a lot more fun to drive. The pair also increased my gas mileage by 3 mpg on the first tank, probably more if I kept my foot out of it.
alex
Reviewed in Canada on April 11, 2018
Fast shipping cool intake dose what an intake dose
David
Reviewed in Canada on December 4, 2016
Sounds awsome! didn't notice any increase in gas millage, Might of gain better throttle response but not certain. It was worth the price and the quality is pretty good.
Stephanie
Reviewed in the United States on December 13, 2012
I purchased this product used and it was rated as good but I figured for $80 it couldn't hurt to try it out and if it was that bad I would just send it back. The only thing i would say was used was the box because the actual CAI came in excellent condition. The air filter was in original packaging, all tubing and rubber attachments were still wrapped. Now putting this thing together was about a 2/10 difficulty but actually reading the instructions was probably 5/10 because the instructions show pictures but they are kinda granny and you need to actually know how an engine works because in the instructions you need to switch two vacuum tubes and if you are unfamiliar with an engine you might think the instructions are incorrect.The only real beefs I had with any of the parts was that in the original instructions in came with a vacuum tube to replace a shorter tube but unfortunately the tube they provided was WAY too short so I had to use the two original hoses and manipulate them to fit but in the end everything fit and all the hoses were attached to the proper location. Now one other, I mean very small, issue was already stated in one of the previous reviews was that the actual air filter fit onto the air intake loosely and would not stay on so like he did I just wrapped it in electrical tape to make the tube a little thicker and that alleviated the problem. Now my last issue was that the kit should have had one more screw to attach the heat shield to the windshield washer fluid hole because the original was too short so I used the steering fluid screw to attach the heat shield and I just went to the dealership and got a new one for the steering fluid overflow.All in all this is a great product that sounds NASTY and will make your Tundra run more smoothly and for $80 this is the best product i have put on my Tundra for the price and ease of instillation.
shnngns
Reviewed in the United States on October 8, 2012
The quality of the kit is great. Although I do think they need to update their instructions, while they weren't difficult to follow (this was not my first intake install though) the instructions referrenced 4 bolts for attaching the velocity stack to the heat shield. While the heat shield had the holes for the 4 screws, the velocity stack did not, and there were no screws included for that step either. It installed just fine without those 4 screws though which leads me to believe they updated their design, but not their instructions.One thing that was happening though, was the filter would barely slip off the other end of the velocity stack. Realizing that the velocity stack is pretty slippery, we wrapped electrical tape around it and clamped the filter back onto it. Problem fixed. It just needed a little extra grip.We're already seeing an increase in mpgs on our Tundra, as well as response in the throttle. And the sound the intake makes is great. I wish it was louder, but that is all a matter of personal opinion.
Recommended Products
$129.95
$ 54 .99 $54.99
$139.95
$ 60 .99 $60.99