Works very well for a good while. Then the back would break when you try to get your cards out. If you need a temporary fix this works. Tell u find something better. If you only put a couple cards in there it's perfect. If you put the max cards in there. It won't work for long.

Easy removal of badges, solid build. I looked around and this is my favorite badge holder. Love how you can just remove the front or the back badge separately. I only use two badges but I could see it feasible for more. Get it if you are on the fence or just need a solid badge holder, even if it’s just for one.

The ID case fits and holds the size of 3 credit cards. At the moment, I've placed my work ID and thick garage access card inside the holder. There are two sliding labeled tabs on the back of the holder that provides you access to push out the front and back placed cards from the holder. I purchased the black colored holder, which secures my ID and is attached to a very thick adjustable cord that has hardware that can be pinched to detach the cord from the ID portion of the holder. You can also open the holder at the top by pulling it apart to place around your neck. It is a very good product.

I've been using this holder for about a month now, and it's working out great. It's lightweight, so it's comfortable around my neck all day. My cards are held in place well, and the slide buttons on the back make removal easy if needed. It also allows my door-entry card to scan without removing it, which is one feature I was looking for when I was shopping for a holder; it's especially helpful if your hands are full. I don't know how well it might hold up in an environment where it's beaten and banged on every day, but for the price it would be worth a try. It's great for an office environment such as the one in which I work. Overall, I'm very satisfied with this product!

Works great for badges with chips to scan. Very cool quick release slides for front or back cards. Quality lanyard and clip components. Recommend for government or security employees that need quick access to badges.

This badge holder is solid, it keeps my School ID, and School Bus Driver ID Sec. badge safe, and working. The overall design is simple, and sleek. The slide buttons on the bottom corners on the black back side of the holder for easy removal of the cards is a super useful design. They are so well designed that they do not push my IDs out when I have the badge holder sandwiched between my coat, or hoodie and shirts. This holder does its job, and it does it right, nothing bad about it!

Carrying around a photo-id and multiple CAC (Computer Access Cards) for work was a pain, but these make it easier. I have my primary photo-id in the clear front slot, and two of my CACs in the rear slot. The slide-actions on the back are easy enough to use and raise the cards up about 3/8" of an inch - or about 1/4" above the top of the holder frame.The frame is plastic and doesn't block the RFID reader that is in one of the cards - that makes entering rooms with those readers very convenient.My only concern is about the plastic "loop" on the frame that the lanyard connects to. The plastic is about 1/8" wide and is probably strong enough, but it's the only place that I can see these might break or fail over time.Still, for the price these are great holders - I bought two (one black, one blue) to help me remember which CACs I use where/when. I'll definitely buy them again if I need to.Update 2022-07-20: I've been using the same two I purchased a year ago and they are still going strong. The clue holding the clear side on let go but a small drop of super glue and it was repaired. My concern about the loop mentioned in the initial version of this post is unfounded; they continue to work well being worn and used daily at work. I've taken up buying one each time someone joins my team - a cheap and useful welcome gift that I know they'll use.

Broke after using it for 2 months, not worth!

I like the fact it hold my 3 modes of transit cards. TTC, presto and bike share! With the tabs at the back they allow me to easily slide up the card I need and put it back again. The breakaway lanyard means I won’t hang myself passing through a turnstile! 😏

So far I am very impressed with my new ID card holder. It easily accepts three credit card sized IDs. They fit securely and when you need to remove them I love the two sliders on the back of the holder that you manoeuvre with your thumbs, which allow the cards to slide up a centimetre above the top of the holder so that you can pull them out. Left slider for the two ID’s in the back and right slider for the ID in the front. Genius! The price was more than what I would usually pay and with the additional shipping cost a single ID holder has cost me £10. But, it is exactly what I needed for work and so far it is doing a great job.

Gesucht war ein Plastikkartenhalter für den Schulranzen. Bitte cool. Bitte wertig. Bitte ohne Aufdrucke. Herr Sohn trägt schwarz und akzeptiert keinerlei Schnickischnacki.Gefunden habe ich diesen hier, der genau DAS erfüllt. Robust, ohne Killefit. Und macht genau DAS, was er soll: eine Buskarte im Scheckkartenformat halten.Praktisch ist hier, dass noch eine weitere Karte auf der Rückseite verstaut werden kann. Beide Karten können mit einer 'Ausschubhilfe' ohne Fummelei herausgeholt werden.Passt. Sohn glücklich. Mama auch. 5 Punkte!

Questo porta badge è proprio quello che cercavo. Semplice e funzionale. La plastica utilizzata sembra di buona qualità ed il tutto è ben assemblato. Può essere utilizzato anche con un solo badge o due, in quanto nella parte parte posteriore ci sono due linguette flessibili che tengono fermi i badge contenuti all'interno. Il sistema di estrazione è semplice ed efficace, è composto da due levette indipendenti che estraggono il badge frontale o i badge posteriori. Consigliatissimo per chi deve portare fino a tre badge.

"I have to have a security card to get to my floor in the office tower. Unfortunately, with age and busy-ness of life, I constantly forget to bring my card to work. Or I would change my wallet/purse and forget to move my card with it. It was a major problem that I am constantly asking to borrow someone else's card. This badge holder solved my problem altogether. I put my security card in here, and hang the set with my car keys. Every morning I put the holder on my neck and go to work, and hang it back on the wall at home when I get home. Since getting this, I have not forgotten my security card even once.When I go buy coffee during the work day, I slip my credit card in the back so I don't need to bring my purse with me. It is ultra convenient. And if I ever put the badge holder in my purse, it has enough volume that it is easy to fish out.It is a quality product that has solved a big problem for me. I would recommend buying it." - Angela Chang"-got this to hold a new id/keycard that doesn't allow a punch hole anymore, might store business cards in extra slots.-there are two sliding buttons at the back that will push front, back or both card slots out.- you can store one card in the front and two on the back" - Smoothie"Works ok with a regular magnetic id or credit card size item. My badges for work is the size of a credit card, but the RFID chip makes them thicker. One side accepted it ok. The other side I really had to jam it in to get it only 2/3 of the way in. Then, I had to use pliers to get it back out.It seems kind of cheaply made, but I didn't returned it due to the problems above, so I can't say if it's durable." - D. Askov"This is an initial review since I have only had this badge holder for a couple weeks. However, liking it so far. Unlike many of the 3-badge holders I have had in the past, the cards lock in which reduces the possibility of the cards falling out. The interesting technology for holding and removing the cards from the holder is wonderful...I never feel like my ID cards will fall out. Overall, the holder seems high quality. After I use this for a time, I may revisit the review." - Michael S. Tucker"this item is just as described. Very sturdy build and the plastic feels like it's going to last quite a while. The lanyard itself is very tough as well. Tangle free probably due to its thickness.You can store 3 cards like it claims. There are two little push lever thingy's that push the cards out.One pushes two cards in the back out, the other one pushes the front card out (most likely your id badge).very easy access to cards.highly recommend this product. If you need a reel, you can remove the lanyard and attach a reel." - Y. Kim"Excellent concept. Perfect for multi badge environment. The tab idea for removing each badge from the holder is brilliant! Perfect for a Government office. Will update the review if I notice any flaws. The last few badge holders were also "perfect" right until the loop that held them to the lanyard broke. Most cases that was too soon." A guy who buys stuff"Love this! I really wanted it for the lanyard, not the holder. Didn't know they could be purchased separately. They lanyard rope is sturdy and adjustable. I already had a see thru 2 sided holder with a zip lock top. However, I am holding on to thexplain holder that came with this set just in case someone needs it or it comes in handy later." - Najsma1"One thing the pictures don't quite portray is how big everything is. The strap is thick. We're talking as thick as pencil. The little hexagon thing is big and bulky, the snap release is oddly bigger then most similar releases. and the card holder itself is heavy. If you're looking for something small and discrete, this is not it. Otherwise, it holds up well and there is switches in the back that push up the cards for easy removal." - D. Avery"Awesome. Durable case. However, you cannot see the second and third card, only the first you can see. The necklace will pull apart at the attachment point if pulled hard enough. Not sure if this is for safety but I haven't had a problem with it coming undone unexpectantly" - Navy Sailor"Top quality ID holder. It has two separate compartments for two IDs. It has a sliding button on the back to lift and release your ID if you need it out quickly. The cord is well made as well as the snap clip the connects the ID holder to the cord. You can just click it off and it's separated. A must buy for people with multiple IDs." - Wolf Stark