Your cart is empty.
Your cart is empty.Specialty Products Company (SPC) 81280 EZ Cam XR (16mm - Pair) EZ Cam XR's are designed for non-slotted struts. It is for both sides of the vehicle.
plemans
Reviewed in the United States on July 30, 2024
I brought my Ford Explorer 2017 awd in for alignment after replacing the steering in it. The camber was out and the factory doesn't come with the bolts to align camber. So it needed to be replaced. The alignment shop wanted to charge $200 in labor and $40 for a single bolt. I replaced both for cheaper than they were going to charge for a single one. A great replacement. Pop a wheel off, take out a single bolt, and install these. Under 5 minutes for each tire. Its a bit rediculous how much the shop wanted to charge for this. I get they have overhead and I'd probably have paid if it was half reasonable. but it wasn't so I saved some money
TA
Reviewed in the United States on October 4, 2024
Saved a lot of money by providing these instead of having the shop buy them
Jackson Falkowski
Reviewed in the United States on June 18, 2023
Not much else to stay but these things work. Seem stout enough, and the torque spec is accurate for the bolt. Would recommend - just read the instructions.
Richard Anthony
Reviewed in Canada on March 23, 2023
For dropped cars... works like a charm. Just read the instruction, and presto...
カスタマー
Reviewed in Japan on December 31, 2023
再購入です。事故に遭い念のため交換しました。側面から突っ込まれショックアブソーバーがくの字に曲がるほどの事故でしたが、キャンバーボルトは折れたり損傷した様子もなくそのまま再使用しても問題無さそうな状態でした。通常使用であれば折損などの心配は全く無いと思います。
Jayman13
Reviewed in Canada on August 25, 2022
Product is awesome, great quality, easy to follow instructions and install was a breeze. Lots of adjustment.Now the seller and Amazon at shipping suck. Seller didn't put full address on for delivery. Amazon is totally off on how quickly it will ship and days to delivery. Said 3 to 4 but was 9 days 10 with address issue
天野 一茂
Reviewed in Japan on August 17, 2022
結局使わずじまいですので、性能的なものは未確認です。造りはかなりしっかりしていますので、破損などはまずない製品だと思います。
Keeper
Reviewed in Canada on February 8, 2021
Great quality
christopher
Reviewed in the United States on August 26, 2020
they are very durable and good for what they do.
winxwen
Reviewed in the United States on May 9, 2019
A local shop would charge me $20+ for each and another $90 for the labor to put it in. That would be a whopping $130 plus $80 for the alignment. $23.03 later and a little sweat I was able to put it in myself. This helped adjust my wife's 2006 Honda Odyssey's camber. Other than that nothing fancy. It simply serves its purpose well. I still have to bring the van back to shop for alignment but at $110 or so less.
GDB
Reviewed in the United States on August 21, 2018
Worked perfectly on my 2004 Mustang Mach 1. Gave just enough adjustment to correctly align the front. I have Steeda progressive rate springs so it isn't slammed on the ground so I only needed a small amount of camber adjustment. If you are going with a big drop(1 inch or more) you will need the real deal caster/camber plates to get the amount of adjustment you're going to need for proper alignment.
slw.dncin
Reviewed in the United States on October 11, 2018
2000 Mustang gt convertible dropped 1-1.5 inches, in dire need of camber adjustment. I was chewing through the front tires every year, the insides would bald out like crazy , a 50% difference in tread from the inner and outerOEM specs are -0.75 +/- 1.25 I used a camber reader tool off of amazon and i was getting - 2/3.0 ish camberI drilled out the stock camber plates and it only gave me +/- 1.0 camber adjustment... I needed morethese bolts gave me just enough adjustment to run a happy -1.0 through +1.0so the 1.75 or so whatever is advertised is true to it's claimTake note you can install these on whatever side you want as long as it's the top bolt. I didn't like the fitment I did at first because it moved the stock ABS sensor bracket to the other side so I just switched sides compared to the instructions and it's been over 1000 miles with no issues.beats buying a whole new caster camber plate for 150 bucks!!highly recommend if you're lowered less than 1.5 inches on a mustang.if you're lowered more than 1.5 inches I don't think these would help you out too much!
T
Reviewed in the United States on September 12, 2015
I always go for SPC's products whenever I can.They're affordable and the build quality is superb.This is for 16mm bolt hole replacement! If you want the 14mm go with SPC 812760Unfortunately my Honda Civic does not have another way of adjusting camber without camber plates so I had to use these bolts.These replace either one or two of the bolts that attach your shock to your car.They adjust easily so you can fine tune your camber but if you want an easier way of doing so, then get some camber plates.
Recommended Products
$33.72
$ 15 .99 $15.99