Your cart is empty.
Your cart is empty.Product Description
The Anti-Puncture Tire for Ninebot Max G30
The solid tire for the Ninebot G30 Max is designed to replace the original tubeless tires of the Ninebot G30 Max scooter, which have a size of 60/70-6.5. It is a puncture-proof tire, making any puncture impossible. Its size is 10x2.5 inches, and it can be installed on both the front and rear wheels of the scooter.
Compatibility Solid Tire 10x2.50 (Replaces Tubeless Tire 60/70-6.5)
This solid tire can be confidently installed on several models of electric scooters:
- Ninebot Max G30
- Ninebot Max G30D
- Ninebot Max G30DII
- Ninebot Max G30E
- Ninebot Max G30E II
- Ninebot Max G30LE
- Ninebot Max G30LE II
If you have any doubt about a compatibility, feel free to reach the MoovMoov Team.
I C Oxim
Reviewed in the United States on February 17, 2025
VERY VERY hard to install! This sucker is firm and tough. We needed a hydraulic press, two strong people, and a lot of elbow grease and patience to install this tire.Once installed, it is GREAT!
Tt
Reviewed in the United States on February 14, 2025
Great tire
JETHIN SAI CHILUKURI
Reviewed in the United States on January 18, 2025
You need tire to heated 15min in hot water
SportageRider
Reviewed in Germany on August 8, 2024
Habe unsere beiden Scooter auf diese Reifen umgerüstet. Vorne ist der Wechsel einfacher, da das Hinterrad erst noch von der Elektrik getrennt werden muss. Für einen Scooter sollten ca. 2,5 Stunden gerechnet werden. Mit 4 Händen ist das Aufziehen, nach 20 Minuten Reifen kochen, kein großes Problem. Allein wird es schwierig. Video findet sich auf YouTube, Link zum Video liegt den Reifen bei. Klare Empfehlung, kein spürbarer Leistungsverlust. Top.
Jacob
Reviewed in the United States on July 31, 2024
It was the biggest pain to get on i had to cut out some of the rubber inside to make it stay on the bead. I wouldn't recommend this tire.
Jose Lopez
Reviewed in the United States on May 29, 2024
Me párese excelente 👌
Lionel
Reviewed in France on March 26, 2024
Ça n'est pas indiqué dans la description, mais les dimensions sont bien compatibles avec les modèles Ninebot F2pro (et probablement les autres de la série F2).Le montage n'est pas évident, mais en suivant la vidéo, on arrive à s'en sortir (au bout du 3ème essai pour mon cas). La position assise est vraiment importante pour bien maintenir le pneu dans la jante et il faut vraiment des démonte-pneus "sérieux".Au niveau du roulage, je trouve le pneu plus "mou" que celui d'origine que je gonflai assez fort : on ressent moins les aspérités de la route, mais ça donne une sensation de "flottement" en courbes. Je pense que c'est une question d'habitude, car il accroche très bien même sur chaussée humide.Enfin, je n'ai pas remarqué de différence sur l'autonomie de la trottinette : les quelques centaines de grammes ajoutés sont négligeables par rapport au poids du conducteur et de son sac à dos plus ou moins chargé. ^_^
Jonathan Arias
Reviewed in the United States on March 18, 2024
Perfect for Ninebot g30p. Pretty easy to install, but would suggest some tire pry-levers.
Irmamonterroso
Reviewed in the United States on October 10, 2024
Está bueno gracias
Alessandro Briccoli
Reviewed in Italy on January 5, 2024
Ottima, dopo aver forato ho deciso di prendere una ruota piena. Il feedback alla guida è ottimo è un po’ più scivolosa rispetto alla originale (sopratutto sulle strisce bianche quando si svolta) ma va benissimo. L’unica pecca è il montaggio che chiaramente è più difficile rispetto a un copertone tradizionale tubless, mi sono rivolto al mio amico gommista che mi ha consigliato di ammorbidire prima il copertone nell’acqua calda e poi inserirlo.Tutto sommato ottimo ne sono felice, spero che duri abbastanza km tanto quanto l’originale
Mr Michael Lindsay
Reviewed in the United Kingdom on January 27, 2024
After years of punctures and issues fitting pneumatic tyres I decided to fit a solid tyre. Best decision ever!I was nervous that the ride would be harsh but honestly I can’t tell any difference.I purchased 3 different pneumatic tyres and spent weeks trying to get the bead seated correctly. Car tyre places, Halfords, bike shops and scooter shops with a no luck. I ended up buying my own compressor and even at 110psi it still wouldn’t mount. Finally I admitted defeat and chose this product.I thought the solid would be a nightmare but it took 2 minutes with the correct tools and 2 people.Boil your tyre for 15 mins before trying to fit. It stinks when you do this so do it in a well ventilated area.You *MUST* use tyre irons. The manual suggests their own brand “Hercules” irons, but you can find allmost identical irons on Amazon for cheaper. They are slightly sharp in places but work fine.The hardest past is getting the tyre on the rim but with 2 people it’s pretty easy. Lube up the rim of the tyre with plenty dish soap. I just rubbed it on with my fingers. Place the tyre on the ground (carpeted area works best) and place the when on top. Use your knees or hold the wheel down while you and another person pry the tyre on.Once the tyre is mounted you need to seat the bead by manipulating the tyre with the irons. I thought this would be the hardest part but it turned out to be very easy and the bead pushed into place with no effort. The tyre is still warm which helps.Great product and I shall do the rear when I get a chance.
phil bess
Reviewed in the United States on April 26, 2024
good tire looks like it will last along time.... but its no joke to put it on. my advise take your time and have someone help you
Jadin
Reviewed in Belgium on July 6, 2023
En respectant le mode d'emploi vidéo de MoovMoov, tout se passe très bien. Montage sans difficulté.
Recommended Products