Your cart is empty.
Your cart is empty. Features:
All aluminum body copper movement, Electric Motor with Forward and Reverse Design, Motor clockwise Running is the correct direction, counterclockwise is the recersing (The counterclockwise rotating speed will be 200-300rpm less than working in the clockwise).
Application:
Replacement Motor is for Bicycle, Scooter, Dirt Quad Scoot, E-Scooter, Go-kart, E Bike, ATV, Go Karter, Skateboard, Minibike, E-ATV, Bike etc.
Specification:
- Voltage: 24V
- Rated Current: 20A
- Chain drive (11 teeth sprocket): #25H Chain 6.35 pitch
- Sprocket Diameter: 25mm
- Output: 350W
- Rated Speed: 3000 RPM
- Wiring: 2 (Black & Red)
- Type of motor: DC, Brushed
- Torque: 1.25Nm (0.92 ft·lb)
- Load capacity: 85KG
- Motor Weight: 4 Lbs
Distance between holes on each tab is about 42mm(1 3/4")
Distance between holes across the tabs is about 95mm(3 3/4")
The Size of Threaded Holes: 5.6mm(1/4")
Motor Dimension: 5.11 x 3.94 x 4.72"
Cable Length: Approx. 13.4"
Package Includes:
1 x 350W Permanent Magnet Electric Motor
Note: During working, the motor will be a little fever, it is a normal.
Anthony Moore
Reviewed in the United States on February 21, 2025
Thought I leave a review bc it's important. So my soon razor 350 dirtbike motor didn't work. I went on Amazon and seen this one which it's a little bigger motor but fits in the same mounting holes perfect. It's has better torque on this baby. I give it 5 stars. Great buy
Junior t.
Reviewed in the United States on January 22, 2025
Razor mx350/400 with 36v battery with this motor and a over volt kit from eBay20mph+
Cody Cesar
Reviewed in the United States on January 18, 2025
Kids burnt up the motor in the Razor MX350 and this was a straight forward replacement claiming a few more watts and RPM. Works great a month or so in.
adam kierstead
Reviewed in Canada on August 29, 2024
The media could not be loaded.
Customer
Reviewed in Canada on August 14, 2024
I connected the motor to 2 x 12V LIthium Ion Phosphate batteries. Initially, the motor ran but then it stopped. I am using it in a razor E200. The motor is 24V , so it should work. Any ideas
Raygun
Reviewed in the United States on July 21, 2024
So as you can see here I have a razor mx350 I got a couple months ago to ride with my girlfriend around town and junk and it's been really fun. That being said she's about 50lbs lighter than me so her stock bike would go 1-2 mph faster and she would just abandon me on adventures free as a bird (tbh who could blame her.) naturally I got sick of being slow quite fast so I upgraded the entirety of the power delivery system to 36v with the help of jordybuilds and a fancy battery I got from here I believe a cao mm battery. The bike was fast as hell hitting 21 on flat (given a 50% power boost I'm not shocked to get 50% of the speed added as well) the thing was an absolute power house. Only problem was that stock mx350 motor produced uncanny amounts of heat on a small 2 mile scoot. So I ordered this on a whim and replaced the stock motor. The bike now runs a solid 22 on flat with a full charge and can easily go 5 miles before the heat starts to become super noticeable. I haven't taken it further than 5 miles (waiting for a my1020 motor as a backup just in case this vevitts dies but it's seeming less likely by the day.) the motor is fast runs smoothly and handles the overvolt like a dream. Given the 20+ miles I've out on it in about 3 days I can't say enough good about it's performanceThe only cons I have for this motor is that the leads have VERY minimal shielding. I made sure to wrap them about 4x in electrical tape to try and keep them protected but I do think it's something vevitts should consider in the future. Maybe a slightly thicker gage on the leads as well they are a bit small to mount into the plugs for the original motor on the mx350.My motor also shipped with a slightly bent mounting bracket however I got 3 bolts in and it's solid/straight enough so I'm not pressed. All in all it's about a 3.8/5 and climbing every day as I abuse it. Would be happy to find the information for this company and work with em directly on something silly small and stupid like this again.Good buy
ted ducharme
Reviewed in Canada on May 5, 2024
works well
Julio C.
Reviewed in Mexico on February 22, 2024
Hola, compré su motor hace unos días, todo bien con el, solo que note que no tiene un manual, me lo podría proporcionar porfavor?
Oscar Ivan Navarte Salazar
Reviewed in Mexico on February 20, 2024
El producto llego rápido y salió muy bueno!!
Chris Niacaris
Reviewed in the United States on December 7, 2024
Works great, easy to swap out and brought the bike back to life.
Bo
Reviewed in the United States on November 16, 2024
It will get pretty hot depending on the RPM's but if you put a fan on it it stays cool to the touch
N/A
Reviewed in the United States on October 19, 2024
Using this to drive a flat lap, it was the most powerful fully closed brushed motor I could find for a reasonable price, and it works very well to drive a 8 inch disc flat lap using a belt at 2:1 ratio(flat lap being the lower rpm)
dan
Reviewed in the United States on September 7, 2023
I've had this installed in a Razor e-300 scooter for 8 months now and it works great. It has a great top end and acceleration, and it has a higher than average RPM so it is doing more than most other models which push less RPMs.In addition, I must note, that I had a dud originally. But the seller offered a replacement and this one is flawless. As I said, it's been 8 months now and it is still strong, and that is with decent use - probably 8 miles a week I ride it. I mention this about the replacement as the seller was very easy to work with and stood by his product, unfortunately, the opposite happens at times but it didn't in this case. So I appreciate how well this motor works and for the seller offering a replacement for the dud.
Recommended Products
$679.99
$ 99 .00 $99.00