Your cart is empty.
Your cart is empty.Product Description
Please Noted：
- The new generation of iPhone finally has a waterproof function, fixed with glue at the edge of the screen, so in the separation of iPhone7 body and mobile phone screen, you can not take apart the screw and then use the suction cup. You need to use a hot air gun or hot air blow to melt the glue before you can use the boot pliers.
Dual-head flexible opening tool
The dual-head flexible opening tool has a patent design, and the stainless steel thin blade has good flexibility and resilience, which can protect electronic products from rigid impact damage and avoid directly breaking or damaging the screen.
- A large force area: Diameter 1.7 in
- Uniform stress
- Stronger attraction: easier to separate the screen
Showpin LCD Screen Opening Pliers
Make it easier and safer to separate the LCD screen
Introduction:
1. Suitable for LCD screens below 4.7 inches, such as iPhone, smartphone, iPad, mobile phone, laptop…
2. Special rolling-wheel design for better use in opening.
3.The end of the tool with anti-slip design make it easier for disassembling.
To use with other tools in perfect combination that will save your time and effort.
- Opener Total length: 5.83 in
- Segment Length: 1.18in and 1.1in
- Radian edge: 60 degree and 50 degree
Slip-Resistant Handle
Ergonomically designed handle with slip-resistant texture for a firm grip.
Safety Limit Points
The phone screen opening plier is equipped with safety limit points, which can prevent the internal cable from being breaking when opening the phone.
Fixed Holder
Fix the phone to prevent the phone from being accidentally dropped, safer to disassemble.
PVC suction cup design
The suction cup is made of PVC material, which has excellent resilience and is not easy to deform giving you exact fit and long lasting service.
Johndot
Reviewed in the United States on January 6, 2025
Hobby use. Seems very sturdy. Worth the price.
ColoCulture
Reviewed in the United States on January 19, 2025
Opened a iPhone 11 Pro Max without heating the phone up to loosen the adhesive. Worked on the 3rd try.
Customer
Reviewed in the United States on January 14, 2025
used this to replace the battery in my iphone 12. worked great! you dont need the fixed holder as the rear suction will hold the phone in place when the screen comes up. the included knife was also very useful in removing the adhesive from the back of the battery.
Simon Stern
Reviewed in Canada on September 5, 2024
Was useful more than once.
Berthier Ouellet
Reviewed in Canada on July 29, 2024
Utile et efficace
Luis Machuca
Reviewed in the United States on December 9, 2024
Great seller, good product, great price!
Ken
Reviewed in the United States on April 20, 2024
Last year I replaced the battery in my iPhone 6S. Separating the screen from the phone body was a struggle. Recently I replaced the battery in my wife’s iPhone 6 Plus. I saw this gadget while shopping for the battery, and over my head there appeared the image of a lightbulb! Yes!And you know what? This thing works. It makes the job easy. E.Z.
Rob
Reviewed in the United States on April 13, 2024
The Clamp is great, the little plastic piece that's supposed to align the phone...useless...won't grip the phone, that being said it's not necessary. the clamp works just fine without it. changed 2 Iphone batteries with it works like a charm.
Lefty
Reviewed in the United States on June 2, 2023
I used this tool to pull the back cover off of my Samsung Galaxy S7. I don't think it is designed well. The handles are too short to get decent leverage and the suction cups too small to hold onto the phone surfaces well. I first cleaned both the front glass and rear cover of my phone thoroughly with rubbing alcohol to ensure it was free of any contamination that might impede with the suction cup action, but I found that the suction cups were stretching when I clamped down such that the short handles would touch each other and not allow for further pulling force. After holding the handles together for about 15 seconds each time one of the suction cups would pull free from the phone. After about two dozen tries using the tool and applying heat with a heat gun around the phone seam I was finally able to get a tiny opening, so small that I couldn't see it. It was the "opener" tool that came with the suction cup clamp that saved the day. The opener tool is thin enough yet flexible with a rigid edge to allow it to be worked into a tiny crack (opening). After that I was able to work the opener tool completely around the phone back cover while alternately using the heat gun to soften the glue.**Warning** don't make the same foolish mistake I made. I figured that since the opener tool worked so well in removing the back cover it would work well to separate the battery from the glue beneath it. It did and worked well, however I manage to push the opener blade underneath the battery wrapping and started to smell a strong odor. It was the glue out gassing due to an extremely hot battery. I had to grab the battery with needle nose pliers and run it outside setting it down on the cement to cool. I strongly recommend only using the plastic tools to get the battery separated from the glue and going very slowly using as little force as possible.I gave this tool a three star rating because I was able to get the job done with it, but I think it could have been much easier with a better tool. Next time I plan to look for one with better suction cups and longer handles with wider distance between them, even if more expensive.
Tabitha Reimer
Reviewed in Canada on December 12, 2023
The section cup didn’t work but I used the knife thing to pry up the phone screen and that worked.
Max
Reviewed in Canada on October 30, 2023
Works well
NitroRednecks
Reviewed in Canada on October 16, 2023
Bought it to pull my phone apart to install mew speakers and I was really impressed how well it worked
Pronounce
Reviewed in the United States on July 19, 2020
The pliers easily fit in my hand. (I wear size large gloves) This does not effect the pliers performance. I applied pressure with a couple of fingers and my thumb and that was enough to crack open the back of the phone. The suction cups are well formed and easily adhere to smooth surfaces.As shown in the picture the pliers come with some tools. (There was a iPhone 4 or 5 screen protector, too.) The case cracking videos show how to use the pry tool. It can cause a lot of damage internally and externally to your device. So use caution when using it. (I have a stack of guitar-pic style openers and spudgers, and so I use them mostly. Less likely to damage the phone.)I gave 5* to durability, because the pliers, suction cups, and phone alignment holder are more than sufficient to withstand many normal phone case openings. I applied heat to the phone while applying pressure and the heat did not cause the suction cup to release, or harm the pliers in any way.I did use the pliers in the other configuration, where both cups faced the phone, and held it while I applied heat and used my opening tools. (Placing the tool in a vise, while holding the phone, and then using another suction cup to pull up while applying heat might be a handy use. I didn't have a vise to try this technique.)
Recommended Products