Your cart is empty.
Your cart is empty.Product Description
Do you work with portable power or benchtop tools that create dust and debris? Do you know that with this Shop-Vac Universal Tool Adaptor you can eliminate many the messes and clouds of dust that you are having to cleanup afterwards? This is true. Whether you are using a portable belt sander, a benchtop chop saw, or virtually any power tool or benchtop equipment, and it is equipped with its own built-in exhaust port, this pliable, soft plastic adaptor will allow you to work in a much cleaner environment. This adaptor features a stepped design that allows for a range of hose diameters to be used, from 1 inch to 2-1/2 inches, that can be used with many shop vacuums and dust collection systems. The soft plastic material can be custom cut to the desired size, and it works with both wet and dry pick up. The internal diameters of this adaptor include 2-1/4 in., 1-3/4 in., 1-1/4 in., 1 in., and 5/8 in., with its external diameters at these diameters: 2-1/2 in., 2 in., 1-1/2 in., 1-1/4 in., and 1 in. This Shop-Vac Universal Tool Adaptor is ideal for use with a variety of both wet and dry clean up tasks, and it is durable enough for both residential and commercial applications. Other available Shop-Vac accessories include hoses, wand extensions, floor nozzles, concentrator nozzles, blower nozzles, gulper nozzles, crevice tool attachments and many more. Be sure to include any disposable filter bags and cartridges for wet and dry pick up with your order, to take full advantage of all the features your wet vac has to offer. Order this set today to add to your Shop-Vac accessories.
Amazon.com
The Shop-Vac universal tool adapter allows you to connect virtually any power tool with an exhaust port to a Shop-Vac wet/dry vacuum. With a 1-to-2-inch diameter range, the adapter custom fits onto any vacuum cleaner's standard hose end. Made of soft, pliable plastic, the adapter can be cut to many different diameters.
Nicholas A. Bogalis
Reviewed in the United States on January 22, 2025
Excellent product
Amy
Reviewed in the United States on September 13, 2024
I purchased this to fit on my wet/dry vac when doing the maintenance on my AC line for drainage perfect fit to suck out all the slime build up.
Charles Platt
Reviewed in the United States on October 8, 2024
Of the five steps in this adapter, none of them would quite fit the vacuum port on my band saw. Paring it with a knife made it barely possible. Really this would have been a better product if it was cone-shaped instead of stepped, so you could cut it to fit.
B. Lowe
Reviewed in the United States on October 15, 2024
I learned last summer about using my shop vac exhaust to inflate kiddie pools, and I was instantly converted. Last year, I had a complicated setup using our electric pump attachments and some electric tape. It was sufficient, but annoying, and when we actually had to use the shop vac to vac our shop, I’d have to undo and redo the whole thing. Well, NOT ANYMORE! I just pop on this bad boy, and watch my inflatables grow.This also eliminates our need to use the weak, sad little electric pump for our air mattresses. I love this attachment.
PH
Reviewed in Canada on October 10, 2024
Voici les diamètres approximatifs de chacune des sections .1 - OD = 2.5" (61.3 mm), ID: = 2.33" (58.9 mm)2- OD = 2" (51.1 mm), ID = 1.77" (45 mm)3- OD = 1.5" (38.3 mm), ID = 1.23" (31.3 mm)4- OD = 1.25" (32 mm), ID = 1.00' (25.5 mm)5- OD = 1" (25 mm), ID 00.70" (18.54 mm)
Jimlewis5252
Reviewed in Canada on July 9, 2023
A Great add on to shop vac ..you can attach it and turn your vac into a compress/blow air.. I cleaned out some plastic hose line for a/c drain.
Yves
Reviewed in Canada on July 7, 2023
Would had prefer a tight integration. You eill need to put a plumbing metal collar.
Jean-P T.
Reviewed in Canada on July 19, 2023
Its expensive for a simple plastic product and I wish it would be accomodate more "pipes/sizes" but it helped me to achieve what i wanted to do so ..
RedPill
Reviewed in the United States on July 15, 2019
To get this to work with my sander, I used a utility knife to cut off the first stage of this. It is a somewhat soft rubber material. It fits in the Craftsman hose on one side and the Ryobi exhaust on the other, but when elevated it slips out, so I used some duck tape to attach it to my random orbital sander, which turned out to be a great solution.When I used that sander without the vacuum attachment, I had rooms full of dust from sanding down trim. With the vacuum attached with this adapter, it is conceivable that you could get away without using a respirator if necessary (though I wouldn't recommend it). The amount of airborne sanding dust this eliminates is probably over 99%, and I don't wind up covered with a thin layer of dust. This is one of those low cost investments that you will truly appreciate, if you can figure out where to even look to solve the problem.
Gunny
Reviewed in the United States on December 17, 2017
The price is nice and product overall is good. However there is a crucial problem that is not disclosed. The first/lowest opening is small which may fit some small power tools like my palm sander which this product fits well. Now lets think what you/I need to think about if say, like me, wishing to to fit the dust out port of a miter saw. That would mean I would need to cut off that small tube opening and the second one up in order to fit my miter saw. So what if you have several power tools that you wish to fit with a vacuum hose, I have 12 tools. SOooo, I would need to but 12 of these "universal tool adapters" Think about it, there must be a better way.
dm1024
Reviewed in Canada on December 15, 2017
Great
Jadwight
Reviewed in the United States on June 1, 2015
I had originally purchased this for my DEWALT D26451 Orbital Sander. I first was trying to figure out in what ways I could get it to fit so at first I was disappointed because the smallest end would not fit, but the larger end would fit, but then when the other end was hooked up to the hose it simply was too small to slide on the ShopVac, what I did find though was that on the small end, simply by cutting off a single tier to the adaptor that the next notch up fit my DeWalt with a slight bit of modification. I give it 4 stars because after I cut the small end off it does exactly what I need it to, I took away a star because I had to modify it, but other than that, this thing worked beautfully for what I needed it for... so If you have a DEWALT D26451, THIS WILL WORK, but you will need to cut the smallest tip off using a razor and trip up the inside of the cup and need to stretch it slightly and after that it just slips on like a glove. Since I purchased this exclusively for use with my D26451 modification was not a big deal and especially since the modification was a simple and easy 2-minute fix.
SJK
Reviewed in the United States on January 18, 2014
I have found this Shop-Vac universal adapter to be extremely handy and have several that I use all the time. I've trimmed some of them down to use with specific tools, but others I left full length. They will fit, or can be made to fit, the dust ports on several of my tools, including my Dewalt DW423 RO sander and Makita 9220 belt sander as well as the coupling on my 1" Porter Cable vac hose. I have one that is trimmed all the way down to the largest cuff and permanently attached to my Makita 2703 table saw dust port and another along with a 2" rubber Fernco connector that is permanently attached to my Delta 28-150 band saw so I can quickly connect my 2-1/2" Ridgid shop vac hose whenever I use them. These adapters are a little expensive for what they are, but have work well for my needs and really do seem to last. Some of mine are probably around ten years old now and have had heavy use, but are still fully functional, so I think they were well worth the expense.
Recommended Products
