Your cart is empty.
Your cart is empty. Seco-Larm E-941SA-1200 Pack of 2 Electromagnetic Locks; 1200-lb Holding Force, Anodized Aluminum Housing (US 28), Selectable 12/24 VDC Operation, Adjustable Mounting Bracket, Detachable Faceplate
The E-941Sx series of electromagnetic locks is the ideal way to secure a door against unauthorized entry. When power is applied to the electromagnetic lock, it creates an extremely strong magnetic field. The electromagnet is strongly attracted to the steel armature plate which is mounted on the secured door. Once the electromagnet is deactivated, the secured door will function normally without any residual magnetism.
Key Features:
- 1200-lb (545kg) Holding force
- No residual magnetism
- MOV Surge protection
- Anodized aluminum housing (US 28)
- Adjustable mounting bracket
- Complete mounting hardware for typical installations
- Additional brackets available for easy mounting or atypical situations
- Detachable faceplate for easy access to wiring
- 12/24VDC Selectable
Specifications:
- Operating Voltage: 12 /24 VDC (selectable)
- Current Draw: 500mA at 12VDC, 250mA at 24VDC
- Door Thickness (max.): 1.81 inches
- Holding Force: 1200-lb (545kg)
- Magnet Dimensions: 10.5 x 2.63 x 1.56 inches
- Mounting Plate Dimensions: 10.5 x 1.56 x 0.25 inches
- Armature Plate Dimensions: 7.25 x 2.37 x 0.62 pounds
- Destructive Attack: Level I
- Line Security: Level I
- Standby power: Level I
- Endurance: Level IV
- Unit Weight: 4.6 pounds
c
Reviewed in the United States on June 29, 2020
The strength of the magnet is stronger than most doors and hinges so basically an intruder would need to break through the door and the lock would still be in place!This is a good bare feature price; you can pay extra for their other model with extra features like LED status light, access buttons and panels, power supply and feedback on door open/close status.Just remember that this model does not come with a power supply.This lock is great for its flexibility; it will close easily, regardless of the magnet's alignments-so it works perfectly with uneven doors and frames.Lastly, the outer casing has excellent hard tamperproof metal security as well as moisture/rust proofing.
c
Reviewed in the United States on June 29, 2020
The strength of the magnet is stronger than most doors and hinges so basically an intruder would need to break through the door and the lock would still be in place!This is a good bare feature price; you can pay extra for their other model with extra features like LED status light, access buttons and panels, power supply and feedback on door open/close status.Just remember that this model does not come with a power supply.This lock is great for its flexibility; it will close easily, regardless of the magnet's alignments-so it works perfectly with uneven doors and frames.Lastly, the outer casing has excellent hard tamperproof metal security as well as moisture/rust proofing.
M.Dale H.
Reviewed in the United States on January 1, 2019
Work exactly sas stated. Work with our alarm system.
M.Dale H.
Reviewed in the United States on January 1, 2019
Work exactly sas stated. Work with our alarm system.
Camp D.
Reviewed in the United States on October 21, 2018
Nice instructions, and pretty easy to install. Works great.
Camp D.
Reviewed in the United States on October 21, 2018
Nice instructions, and pretty easy to install. Works great.
J Garcia
Reviewed in the United States on September 7, 2016
This is a review for the 1200 lbs lock. So I bought this lock a week ago, when it got here, it took me about 8 hours to install (I had no experience what-so-ever with this before so I had to run back and forth to the store to get cable and drill bits). With it I bought a power supply of 12V 500mA. I was lucky that the power supply was the exact match that the instruction booklet specifies. You must buy the power supply, it does not come with it. This is the one I bought https://www.amazon.com/gp/product/B000VRL632/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1 (I just saved you the trouble of it (: you're welcome). I also bought this exit button to open it from the inside https://www.amazon.com/gp/product/B0051BUGCA/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1 . This exit button has a green LED that requires12V to light up (it did not came with it) The lock did came with the mounting bracket that was compatible with my door, but you might need to buy one that is compatible with yours. (Just buy it as is, if you find out it isn't compatible then buy the bracket separately. They usually go by the name of "Z Bracket for magnetic locking mechanism".The reason I bought this lock was because I own a gym, and I want to provide my members with a 24 hr access. I do want to mention that you also need to buy a device that will unlock the magnetic lock (besides that exit button). My member management software came with one so i did not have to buy one,but something like this should work https://www.amazon.com/Docooler-Entry-Access-Control-System/dp/B00LQ7SGXO/ref=pd_sim_sbs_421_27?ie=UTF8&psc=1&refRID=182KQWAMTKBQE517YT90 .First, I would like to say that (with proper installation, if i may say so myself) the lock hold VERY WELL. I'm using 12V at 500mA and OI really can't pry it open. I tried using force, tools, and other means to pry it open only to fail to forcibly open it again and again. The quality is a lot better than many of the other locks that I seen online prior to this one, and for the force that it holds it was really a good deal (in my opinion ofcourse). The seller specifies that you should use a 1A power supply, but the specifications say 500mA, and that worked just fine with me (less electricity cost too).You also have to determine if this lock is what you need. Remember, if there is a power outage, the lock will open! If this is a security risk for your needs thenI would recommend getting another type of lock, or installing an emergency powers supply for when that happens (something like a battery). Overall I personally am very happy with this lock. I added some photos of the installation and the specifications for the power supply.I hope this helps!If you have questions you can ask me at jesussgrc@gmail.com
J Garcia
Reviewed in the United States on September 7, 2016
This is a review for the 1200 lbs lock. So I bought this lock a week ago, when it got here, it took me about 8 hours to install (I had no experience what-so-ever with this before so I had to run back and forth to the store to get cable and drill bits). With it I bought a power supply of 12V 500mA. I was lucky that the power supply was the exact match that the instruction booklet specifies. You must buy the power supply, it does not come with it. This is the one I bought https://www.amazon.com/gp/product/B000VRL632/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1 (I just saved you the trouble of it (: you're welcome). I also bought this exit button to open it from the inside https://www.amazon.com/gp/product/B0051BUGCA/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1 . This exit button has a green LED that requires12V to light up (it did not came with it) The lock did came with the mounting bracket that was compatible with my door, but you might need to buy one that is compatible with yours. (Just buy it as is, if you find out it isn't compatible then buy the bracket separately. They usually go by the name of "Z Bracket for magnetic locking mechanism".The reason I bought this lock was because I own a gym, and I want to provide my members with a 24 hr access. I do want to mention that you also need to buy a device that will unlock the magnetic lock (besides that exit button). My member management software came with one so i did not have to buy one,but something like this should work https://www.amazon.com/Docooler-Entry-Access-Control-System/dp/B00LQ7SGXO/ref=pd_sim_sbs_421_27?ie=UTF8&psc=1&refRID=182KQWAMTKBQE517YT90 .First, I would like to say that (with proper installation, if i may say so myself) the lock hold VERY WELL. I'm using 12V at 500mA and OI really can't pry it open. I tried using force, tools, and other means to pry it open only to fail to forcibly open it again and again. The quality is a lot better than many of the other locks that I seen online prior to this one, and for the force that it holds it was really a good deal (in my opinion ofcourse). The seller specifies that you should use a 1A power supply, but the specifications say 500mA, and that worked just fine with me (less electricity cost too).You also have to determine if this lock is what you need. Remember, if there is a power outage, the lock will open! If this is a security risk for your needs thenI would recommend getting another type of lock, or installing an emergency powers supply for when that happens (something like a battery). Overall I personally am very happy with this lock. I added some photos of the installation and the specifications for the power supply.I hope this helps!If you have questions you can ask me at jesussgrc@gmail.com
E Z Long Beach
Reviewed in the United States on January 12, 2014
I purchase this lock as a secure lock for a hidden door walk in closet where i choose to hide my valuables. I chose magnetic lock for the low profile look (no obvious sign to see like a knob or keyhole the will defeat the purpose of being a "hidden door"), Locking power, and no moving parts so its quiet and no parts to lubricate or break down. My setup is quite simple the lock, an old a/c adapter from my sirus radio, and a Christmas light remote to turn it on or off. I also plan on plugging the a/c adapter to my old UPS so that the lock would remain secure for at least 3 hours in a power failure. Now for my Pros and ConsPros:Relative easy to install. All you need is a good drill and you can get this up in no timeHolding Power. My door would give way first before I could separate the plates, it really is held in there.Quiet Operation. You can engage and disengage the lock without anybody noticing you did.Cons:I did say relatively easy to install but you still need basic skills as installing this you do need basic electrical and wood working skills.You need to properly align the base plate with the magnet for it to hold tight, any misalignment of the plates will result in less than satisfactory result.The unit would run warm (which is actually good in cold weather to prevent lock from freezing up) and would consume around 5W of electricity to operateAll in all a great buy for me and if in your application you think this kind of lock is best for you its money well spent.
E Z Long Beach
Reviewed in the United States on January 12, 2014
I purchase this lock as a secure lock for a hidden door walk in closet where i choose to hide my valuables. I chose magnetic lock for the low profile look (no obvious sign to see like a knob or keyhole the will defeat the purpose of being a "hidden door"), Locking power, and no moving parts so its quiet and no parts to lubricate or break down. My setup is quite simple the lock, an old a/c adapter from my sirus radio, and a Christmas light remote to turn it on or off. I also plan on plugging the a/c adapter to my old UPS so that the lock would remain secure for at least 3 hours in a power failure. Now for my Pros and ConsPros:Relative easy to install. All you need is a good drill and you can get this up in no timeHolding Power. My door would give way first before I could separate the plates, it really is held in there.Quiet Operation. You can engage and disengage the lock without anybody noticing you did.Cons:I did say relatively easy to install but you still need basic skills as installing this you do need basic electrical and wood working skills.You need to properly align the base plate with the magnet for it to hold tight, any misalignment of the plates will result in less than satisfactory result.The unit would run warm (which is actually good in cold weather to prevent lock from freezing up) and would consume around 5W of electricity to operateAll in all a great buy for me and if in your application you think this kind of lock is best for you its money well spent.
B. Holeman
Reviewed in the United States on April 13, 2014
We bought this after having lots of problems with an electric strike and it does the job just fine. We'd recommend using a power supply with battery backup in case of power outages, and we used a PIR motion sensor as our request-to-exit (REX) input device.
B. Holeman
Reviewed in the United States on April 13, 2014
We bought this after having lots of problems with an electric strike and it does the job just fine. We'd recommend using a power supply with battery backup in case of power outages, and we used a PIR motion sensor as our request-to-exit (REX) input device.
JIR
Reviewed in the United States on November 3, 2011
I am buying this electromagnet with a different use in mind, so my review is for that application. The reason I am buying it is because I will be using it for experiments involving magnetic fields including this product and magnetically active fluids.This electromagnet and its steel plate are very heavy and well constructed, I can report that the magnet itself will exert a lot of force on the plate once it has been connected to a DC source. The force is enough that if placed correctly on a door would make it extremely hard for somebody to open, which is intended purpose of this electromagnet. However, it has to be used with the right kind of system which is not included here, but might be suggested in the products that go with it.
JIR
Reviewed in the United States on November 3, 2011
I am buying this electromagnet with a different use in mind, so my review is for that application. The reason I am buying it is because I will be using it for experiments involving magnetic fields including this product and magnetically active fluids.This electromagnet and its steel plate are very heavy and well constructed, I can report that the magnet itself will exert a lot of force on the plate once it has been connected to a DC source. The force is enough that if placed correctly on a door would make it extremely hard for somebody to open, which is intended purpose of this electromagnet. However, it has to be used with the right kind of system which is not included here, but might be suggested in the products that go with it.
Recommended Products
