aen
Reviewed in Canada on January 13, 2025
This was bought for someone else. It was very useful.
amy
Reviewed in Canada on September 16, 2024
This product us terrible. The shield cannot be seen through whatsoever. It wouldn't be possible to wear this and be able to see anything at all. Do NOT REVOMMEND this product to anyone
oscar
Reviewed in Mexico on February 15, 2024
Lo esperado
Customer
Reviewed in Australia on July 14, 2020
Crap product flimsy doesn’t attach well kept falling off ! Don’t buy it
Elizabeth Statice
Reviewed in the United States on July 10, 2020
This shield is 7.5 inches tall. I was hoping for a taller face shield ( I have two of another brand that are 9.5 inches tall, no longer available), but this is much better than nothing. The replacement clear shields (take off the film!) will keep this in service for a long time. The shields are washable with soap and water. I replaced the first shield after 30 uses; still clear and almost free of scratches, but dented after dropping it a few times. The dents are OK indoors, but reflect too much sunlight outdoors.The round pins on the side do not properly hold onto the shield. Fortunately, a pair of ordinary one inch oval wire paperclips can be manuvered over the peg, the shield, and the plastic band to hold the shield securely.See attached photo of the plastic-coated paperclip, modifed with a bench vise and small needle nose pliers. I straightened and bent the 1 inch paperclip's large loop into a hook that wraps around the inside of the shield band, with the point of the clip wrapping over the top and towards the outside. I made the hook as conformal as possible, so hair doesn't get caught in any gaps. Works great!The shield 9.5 mil clear PET plastic - I'd like to find more PET sheet so I can make more replacement shields, with scissors and a paper hole punch. Sadly, 10 mil clear PET is also back-ordered. However, the 10 plastic shields that came with the first set (and the 5 more sets I ordered because I liked the first) will last a long time for my spouse and myself and a couple of friends.The headband is vented at the top., which minimizes fogging when hot or working hard. I wear a wide-brimmed hat above the shield band, which keeps particles from falling inside the shield but allows circulation. I wear an N95 mask underneath, and the face shield keeps the outer surface of the N95 clean for reuse after sterilization.Assuming I am not permanently damaged by COVID-19, I can expect 5 or 10 million minutes of productive life in the future. If this shield reduces my chance of infection by one part per million per use, then one minute of handling and cleanup per use can buy many more minutes in the long run.If everyone thought about the long run (for themselves and their less-fortunate neighbors), we would not have a COVID-19 problem in the short run. Ah, well ... evolution in action.
Issa
Reviewed in the United States on June 9, 2020
I waited for this item for over two months. I received them last Wednesday. The headband and the shields were badly bent. As others pointed out they are not "super transparent" and hard to see thru. No foam piece, so wide open for any particles floating in the air.They are simply not usable. I tried putting one on the headband, the holes matched, but it popped right out. So this is not usable at all.Tried to return them, but Amazon said "return window has closed". What? I just received them! Please Amazon, make arrangements for the return. According to your written policy I should have 30 days, I did not have even one! My "return window" closed before I received the item.
Lonnie Green
Reviewed in the United States on June 8, 2020
I figure if you want to flip the shield up,taking it off is better than the room (aka 1 inch gap )If anyone it's taller than you or standing above you,no blocking total top.so I filled that gap in.the width side are 2 inches too short. Shield ends by face,leaving another gap if cough from someone next to you. I added plastic to cover both sides. Not sending back because it took months to get it**The breathing easier than a mask and people understand what your saying better. See so many people take mask off to talk, which is why I'm wearing it to cover when you talk and I talk. Think this will help better than mask.😁 AFTER THE EXTRA ADDED COVERAGE I did to it.
Maryarena
Reviewed in the United States on May 23, 2020
*I am revising my review, because after about six messages with the Seller, I was told that the masks HAVE TWO PROTECTIVE COVERS. After a lot of trouble, I was finally able to get them off and, yes, they are transparent! I will revise my rating accordingly, giving them a four, because the are so hard to remove. The seller always replied to my complaint, but I can’t understand why it took so many messages for them to tell me they have TWO protective covers. *Product took a long time to get here, but I don’t blame the seller as shipments are taking long from China. My shield works fine and is comfortable, BUT, and a big but, the shield is not transparent as it says. Makes me want to take it off. I’m really disappointed that the shields are not transparent. Hope some can be sent to me.
jamie spears
Reviewed in the United States on April 3, 2020
As a dialysis nurse, I have purchased several of these over the years. I am especially happy with this one as it fits well, comes with many extra plastic shields to replace old/dirty ones. I love the fact that you can push these up when you don’t need the shield factor and can lower the shield when you do (think welders mask). Also, this one is the best I have bought as the connections between the moving parts don’t get stuck in and pull my hair. Great product, great value. So much so that all of my coworkers are asking where I got it!
Cliente
Reviewed in Mexico on April 20, 2020
No he recibido el pedido, pero observo que cambiaron el modelo que escogi
C.G.
Reviewed in the United States on May 3, 2019
I bought the face shield for spraying plants around the yard. I spray fruit trees where I have to spray upward. The shield protects my face. The only problem that I have with the shield is an opening at the top of the frame. I use clear tape or Saran Wrap to cover this opening so no spray will fall down through this open space. It works well now. I don't have any trouble with it fogging. I do have to wipe the spray from the shield, but that is understandable with liquid falling onto the plastic. It wipes off easily and I'm ready to continue spraying. I'm satisfied with this shield and like the fact that they give you extra replacement films for the frame.