Your cart is empty.
Your cart is empty.Random person
Reviewed in the United States on February 3, 2025
Can't go wrong, even filters out most smells, didn't even know my neighbor was grilling 😅
wilbard
Reviewed in the United States on January 6, 2025
This dust mask was very comfortable to wear, didn't restrict my breathing and was able to wear my glasses with and the glasses didn't fog up even working in unheated garage.
R Dove
Reviewed in the United States on January 5, 2025
The Large M2 RZ mask strap is too small. On this design, one velcro strap secures the mask to your face. The velcro pad does not have enough fabric to easily fit around the back of your neck to wear confortably and can not be adjusted that much. A longer area of velcro would be much better design to fit more people. The pads are about one inch by two inches. Around your neck only the very tips of these pads touch, so you can pull the elastic and really grip them to your face, but that is extremely uncomfortable.
Daniel P.
Reviewed in the United States on January 12, 2025
Working with power tools and wood generates a lot of dust which can be harmful to your lungs over time. This mask is super easy to store, put on/take off, and filter installation is a breeze.Highly recommended!
Claire N. Cherin
Reviewed in the United States on August 4, 2024
I’m a silversmith and need to wear a mask when working. Lots of small particles get airborne as I work. This mask is very comfortable, btw I bought a medium. Easy to put on and easy to breath. The nose piece can be manipulated to sit comfortably on the nose to keep out dust and particles. The mask has a zelcro closure on the back of the neck that makes it easy to fit comfortably. Comes with extra filters. I purchased the 1st RZ MASK 2 years ago. I feel that it held up well. I recently ordered a new one, but this time I ordered the large and I find it’s even more comfortable and has better coverage. My face is a bit narrow, yet pretty average. Well made! I recommend the mask.
Andytheman
Reviewed in the United States on January 16, 2024
What I liked: I plan to use this for dust in a woodshop and solvents e.g., Acetone, rust and paint remover. This model has carbon filters and worked as advertised.What I didn't like: I haven't used this type of strap, single, wide and below the ears and I don't like it. The mask is constantly pulling straight down, I would buy the 2-strap. Also the top of the filter digs into my nose and pinches too, so it's hard to breathe with my nose.It is lightweight so my cheeks could get more air than my nose.The moisture/exhaust ports have 3 very finicky pieces each (x2), the filter inside is only attached by the ports so the sides of it flap around.The ports fill with liquid if you exhale.It comes with a bag, a tool to remove the filters and a velcro strip if your head is bigger than a child's.
Scott
Reviewed in the United States on January 10, 2024
This is a great mask for woodworking! I was impressed with the quality of the materials and what is included at the price.In the box: a mask, replacement filter, cloth storage bag (with a small carabiner on it!), valve tool (also attached to the bag), and instructions.The fit is a little uncomfortable. The strap is a hook and loop and when it is fit snug, I find it putting pressure on the back of my neck toward the base of my skull. This also pushes the bridge of my nose inwards. I might have to fiddle around with the fit a little.I don’t find that it gets in the way of any protective eyewear, and had minimal fogging!Bottom line, it’s a good value for the price.
LB
Reviewed in the United States on March 13, 2023
My original review: "No matter how much I’ve tried to love this mask, it just doesn’t fit on my face properly. It pushes hard on my nose and is so uncomfortable. It came highly recommended, but it’s apparently just not for me."I was contacted by customer service and they have sent me the mask with the two straps for no extra charge. Once I loosened the straps, this mask works for me. Thank you so much!
Larisa
Reviewed in Canada on February 21, 2023
We had an issue with sizing and the seller was very responsive and helpful.For buyers, there is both a facial measurement and a body weight criteria for sizing.
Pablo Presa Maldonado
Reviewed in Mexico on December 18, 2023
Ya la habia visto en un video se me hizo algo bueno por lo accesible de poner y quitar xon velcro, muy recomendada se ve la caludad y se siente me quedo confome a las medidas aunque una medida arriba me hubiera quedado mas olgada pero me quedo justa que pues es mejor a la larga para que no ingrese por ningun lado el aire contaminado.
The metal nose piece broke on the first day of use
Reviewed in Australia on October 12, 2023
The metal nose piece used to fit the contour of your face broke off with in 2 hours of use
Toddles
Reviewed in Canada on October 5, 2022
The product came as advertised and is very comfortable to wear. I bought this for woodworking because my other high-quality face mask respirator has 2 straps so I have to undo both to temporarily take off vs being able to simply slip it down. It also leaves deep lines on my face and that's annoying. The RZ Mask is easy to put on, slip down, doesn't leave marks on my face, and it's easy to breath through. I don't have a big head/ face and I bought the large.
T. Carter
Reviewed in Australia on January 28, 2020
Very disappointed!I bought this to filter the PM2.5 and PM10 particulates that are causing air quality problems in Australia because of the raging bushfires.It is definitely NOT a large size mask and the extension strap is useless and completely ineffective for extending the size of the mask.Whilst the mask fits on around my face and head, it pulls down way to much on my nose bridge making it very uncomfortable. Even with the extension strap in place (that barely holds) it still does the same thing. I think this is because the next band is much lower than the face mask, so it can only pull down. It needs an additional higher strap that goes around the back of the head, not down low on the neck.The extension strap is a thin piece of velcro, but it doesn't provide anywhere near enough contact with the other end of the strap to ensure a strong hold. Moving your head around causes the velcro to come undone.The filter tries to cover most of the mask area but there are areas that the filter doesn't cover, e.g. it is smaller than the mask. If the mask fits snuggly against the face I ASSUME this filters the air properly to the measured standard, but it's possible for such tiny particles (remember these are measured in microns, e.g 1000th of a millimetre) to get through between the filter and the face. There is no tight seal to prevent them getting through so I don't even understand how this would actually filter correctly.There is a foam padding for the nose bridge, but is this also PM2.5 rated? If not, surely the particulates are just getting through here as well.
Recommended Products
