Your cart is empty.
Your cart is empty.Product Description
Product parameters
- Resistance value: 100Ohm
- Shaft diameter: 6MM
- Standard shaft length: 20MM
- Outer diameter: 24MM
- Tolerance of resistance value: ±10%
- Mechanical Stroke: 300°±5°
- Temperature range: -10℃-85℃
- Rotational life: 20,000 revolutions
- Power: 2W
Package list
- 6Pcs RV24YN20S B101 100R Potentiometer
- Packed in a small boxes # Easy to save and use
- Brightly colored model label # Easy to distinguish
eric
Reviewed in the United States on March 1, 2025
High quality 10K potentiometers. These are single turn, and have are larger than others because they can handle up to 2W of power. Tolerance is 10% which is what I measured as well, less than 1K off when fully CCW. These come with solder tabs and are panel mount with a nice dial that can be positioned however you'd like. The knob is nice too, very vintage looking.
Gregorio Bibiloni Juan
Reviewed in Spain on February 5, 2025
Perfecto
nemo
Reviewed in France on January 28, 2025
bonne qualité
Stefano Sunda
Reviewed in Italy on January 1, 2025
Mi è piaciuto la scala graduata dell'oggetto.
J. Todd
Reviewed in the United States on December 8, 2024
Good set of potentiometers compared to cheaper products I have used with a life cycle rated for fewer revolutions than these. The shafts turn very smoothly and feel to be of high quality. The included settings indicators are useful, and the included knobs are better than the average knobs I have seen included with other potentiometers. Resistance measures well within specifications for the samples I have. They are a bit thicker than many other 10K potentiometers I have used so be careful that they will fit in your application, something I didn't pay attention to until after receiving them, causing a redesign in my project for the mounting locations. Not a fault of the product, but something to take note of before ordering.
R. Mun
Reviewed in Germany on December 7, 2024
I ordered this potentiometer to regulate the audio signal from preamplifier 2.0 speakers to a pre-amplified homemade subwoofer. I have been using it to get very good bass for a 7.2 audio system and from my PC. The audio signal from the PC had to be attenuated and this potentiometer works really well. Since it is easy to regulate the signal passing through it, I can finally enjoy the great bass without changing anything on my homemade pre-amplified subwoofer.I ordered two items and both of them work great.
Humphrey-Tech
Reviewed in the United States on December 3, 2024
I am happy with this item.I ordered them for use in a homemade morse code decoder project.While the quality doesn't feel as good as some of the more expensive pots, they don't feel really cheap either.There are no dead spaces and the value doesn't drift. This was important for me since I'm using them to set the frequency in a PLL circuit.Overall I'm very happy with this item and would definitely recommend them to other makers.
Kimberly Purvis
Reviewed in the United States on December 24, 2024
My husband liked them and he had went through a lot of potentiometers for the robot mower he is building
C & K
Reviewed in the United States on December 22, 2024
I am reviewing the B103-10k pair of potentiometers. These potentiometers worked as described. My particular one was 10.12 kohm at both ends of its slider. It has smooth action, both physically and electrically. The cover plates assembled easily. The set screws for the knobs were loose in the box which was worrisome, but they were still there so it was no problem. The faceplates have protective film on them that you can remove at install to ensure it stays protected until ready to go.I do wish that both the pots and the plates were notched. Most components with turning action should be notched so you don't accidently turn the whole device within the mount. These are not notched, so you must separately secure these enough that they don't turn.At the time of this review, the pair of potentiometers is listed for $10, which I think is a fair value given that they have face plates.
Tom H
Reviewed in the United States on December 21, 2024
Linear resistance. Each read 9.93K ohms full scale. Has large knobs and the back plates very closely match the range of motion. Includes the locking washer and tension nut for mounting on a panel front. Even comes in a nice reusable plastic case that you can use to store small parts in later.
J. Overton
Reviewed in the United States on December 19, 2024
potentiometer itself is good quality and about as robust as any other. As long as I support it using the nuts I don't see any issues. The knobs are a great addition as well as the 0-100 indicator. Looking forward to getting these into a project for a more "polished" look as opposed to a more DIY look.
MMCast
Reviewed in the United States on November 18, 2024
These potentiometers are of very good quality and work exactly as expected. I like that they come with dial markers and knobs, which make adjustments much easier and more precise. However, I was disappointed by how the product is described. The listing says “6 pieces,” which made me think it was a set of six potentiometers. In reality, it’s two sets that include potentiometers, knobs, and mounting hardware, and they’re counting every individual item as a piece. If that’s the case, they might as well count the screw nuts too! I find this misleading, and it’s frustrating when listings aren’t clear. But that’s on me I guess. That said, the potentiometers themselves perform well. I tested them with my ohm meter, and they appear to have good precision, with the resistance value measuring accurately to 10KΩ as advertised. They also have a durable build. I’m using these to replace potentiometers on one of my power supplies, and while I’ll need to buy another set since I need four, I’m satisfied with their functionality so far.Overall, while I was annoyed by the misleading packaging description, the product itself is solid. It’s well-made, easy to adjust, and comes with clear printed markings for easy identification.
claudio
Reviewed in Italy on October 31, 2024
tutto bene
Recommended Products