Your cart is empty.
Your cart is empty.Product Description
Tailored for Your Tesla
RuiYue Carry presents custom-fit car seat cushion exclusively designed for Tesla Model 3 and Model Y front seats. Witness the seamless integration that enhances the aesthetics and comfort of your Tesla. Elevate your driving experience with RuiYue Carry's perfect fit.
Revitalize Your Seats
Extend the life of your car seats with RuiYue Carry Car Seat Cushion. Say goodbye to wrinkles and creases. Our cushion breathes new life into your seats, providing a smooth and refreshed appearance.
Effortless Cleaning
Cleaning has never been easier. RuiYue Carry Car Seat Cushion is water-washable, allowing you to maintain a fresh and clean driving environment effortlessly.
Breathable Comfort, Skin-Friendly
Experience the ultimate comfort with RuiYue Carry Car Seat Cushion. Our breathable and skin-friendly material ensures an enjoyable driving experience, free from any unpleasant odors.
All-Season Comfort
RuiYue Carry Car Seat Cushion brings year-round comfort to your driving experience. Stay cool in the summer and cozy in the winter. Embrace the perfect driving companion that adapts to all seasons.
Michael J. Wilson
Reviewed in the United States on September 23, 2024
It was definitely a struggle to get them in and to fit. They look nice for the most part. The part you sit on in the front seat (called the seat bottoms) shift a little bit and I could not get them to be perfectly fixed. I did my best to tuck the rear of the seat bottoms into the seat "break" (where the rotation happens for adjusting the back rest), but I still can't get them to be totally snug. I also noticed a bit of unraveling at the seam in the seat "break" on the front passenger seat and there is a loop of thread. I tucked it back into the seam, and I hope it stays in place. That is a quality issue though. I also noticed after 11 months there are teenie tiny tears next to a few of the tiny perforated holes on the driver's seat bottom I sit on, so I don't think the quality is necessarily the best since it should be fit for purpose (able to withstand daily wear). The covers also cause the seats to make squeaky noises when I take turns in my M3. I haven't figured out a way around that.
Collyn
Reviewed in the United States on September 15, 2024
It took me a couple of hours to install these, and it can be pretty tedious to do. They seemingly fit pretty well, and even keep the center cup holder in the back seat usable unlike other brands. These seat covers feel great, and look like they should hold up well. I still need to go around in the daylight and tuck in some spots.I have removed one star because the straps are prone to breaking. I broke 2 off during the installation process, but it didn’t seem to mess with anything too much. They look nearly OEM, and once the little wrinkles go away I don’t think the average person would notice a difference.
Customer
Reviewed in Canada on July 11, 2024
Really nice
Client d'
Reviewed in Canada on February 9, 2024
High-quality cover, fits perfectly. Very satisfied. Fast delivery and seller very courteous and helpful.
Sam
Reviewed in the United States on November 11, 2024
This is the third seat cover I have purchased for my 2022 Tesla Model Y. The first one lasted two years before the leather began cracking in some areas. The second one I bought did not fit well, and I didn't like its latch design, so I had to return it after fully installing it. This one fits the best and seems to be of great quality. It looks very nice and has improved the interior look. It's the best seat cover I've had so far.
Mike Stortini
Reviewed in the United States on April 6, 2024
Overall a great product. Some observations regarding the omission of some important installation tips.1. The installation guide that came with the kit was rather generic in nature and omitted some items or had some steps out of order; some details as follows:2. My kit included “full surround”; the instructions mention full surround backrest “stopper”, but step 1-07 essentially says to finish the backrest installation with the hooking of the “stopper “ into final position. However, that same stopper must immediately be unhooked to enable the installation of the front seat surface to begin.3. There should be a label fixed to each respective “driver’s/passenger’s front row backrest cover” designating which one goes on which seat; I know the airbag location on the backrest’s, so I was able to deduce which cover went on which side. A novice installer may not notice that a seemingly correct backrest cover installation is in fact blocking the seat back airbag because the wrong one was installed on the wrong seat back.4. My kit included “driver’s/passenger’s rear row door panel cover”. The installation instructions for this, steps 06-01 and 06-02, gloss over the very complex way these covers actually have to be installed to work correctly. There are three black cloth pouches, about 5cm x 5cm, stiffed with some synthetic material, sewn into the back of these covers. These pouches have to also be stuffed behind the OEM trim piece in order to act as “masses” that will not let the cover edge slip out from behind the OEM trim piece. Lots of nuances required to get these pieces into place (photo above).5. Finally, previous experience with interiors had me removing the eight front seat (four per seat) T45 anchor bolts prior to attempting any installation of the “front row seat cushion cover(s)”. This allowed me to tilt the seat up (front or back as required) to allow an unencumbered view of where the seat cover straps would route themselves (and the straps with hooks would hook themselves). In the end, I chose an X pattern for the three longitudinal straps as this kept the outboard straps away from the seat worm drive unit as well as away from any “weight on seat” sensor arrays (as per the included photo).
BRYAN ROSS
Reviewed in the United States on April 13, 2024
As a former auto tech, and have gutted and rebuilt interiors in the past, this was a generally easy process other than space to handle this task, overall installation isnt horrible to do labor wise expect about 2 hours if experienced with trying to get it right. however...thats where the failures are...you cant get this fitted right.Fabric> seems thick, durable, feels decent to the touch and was enjoyable.Color>Wine red is fantastic looking in the black tesla interior. 5 stars for the colorFitmet> Completely poor, i could not latch the back seat down to the frame, folding down seats barely move, lots of play in the covers cannot get them tight, seatbelt latches attached to the seat bottom frame wont come all the way thru. Very poor and lack of hooks to hold the front seat backs solid. Middle armrest looks awful, and the 60/40 seat, well the 60 side good luck getting that to fit right and stay that way...part of it does, but at the center armrest its not durable in terms of staying in place if its used muchOverall, 1 star because they are useless, and simply do not fit very well.
krishna kayala venkata
Reviewed in the United States on September 24, 2023
Good product but it is not lasting. After a month of usage it looks very tacky and forced to remove some covers because if that. It is getting loose and not comfortable to sit.How can I contact manufacturer or supplier. I want to talk to them and see if I can fix it or return the product.
N. Maione
Reviewed in the United States on August 26, 2023
I love these. The are just like the leather on my car. They are a good fit. It’s super complicated to install is the only negative but I leave mine loosely tucked in instead of fully strapped in. Works fine. Looks fine. Five stars for fit, price and quality. I can’t blame the product for me being too lazy to install it right.
Chad
Reviewed in Canada on December 31, 2023
Extremely difficult to install, installation instructions seemed like they were for an older model of Tesla (I own a 2022 Model 3).Way too many straps and hooks and the back cup holder section required the use of an adhesive so you had to make sure you get it right the first time. This portion also ended up with wrinkles for some reason even after tucking in all the leather.Maybe find some seat covers that just slide on and you can trash if they ever get dirty cause I never wanna put another set of these on another car ever again.
William Hosking
Reviewed in Canada on December 12, 2023
Sent it back at MY Expense! Cost me $270 Cdn to return! On the other hand the one seat that I installed looked good!
Steve
Reviewed in Canada on November 25, 2023
Will admit the quality of the seats are excellent. The seller reaches out to ensure everything is done smoothly and help if you have any issues. Highly recommend this product!
Recommended Products
$43.99
$ 19 .99 $19.99