Easy to put together (better with a helper), durable shed. Good sturdy material. Delivered to our door. We had some leaking after a big storm but it was my construction failure not the product. Really like it for small storage space.

So we needed a shed to store items that were cluttering up garage but according to our HOA it can’t be seen from the road and if it is, it must match the color and material of you house. So this is just low enough that it can not been seen over our fence and is still big enough to store all my yard care equipment and more. It was extremely easy to assemble and is well waterproof. As long as you level the ground before assembling it the doors close perfectly. I have placed in the corner of my back yard and even though it can be seen from while setting out on my back porch it looks great.

First things first - our shed did NOT come with the "roof brace" metal piece. We do not live in a high wind / bad weather / snow area so it wasn't a huge deal to not have this, but it was discouraging to spend $300+ on a plastic shed that didn't come with all the materials. The brace basically is some extra part that helps further secure the roof to the walls and adds some stability to it by adding some additional structural enhancement to the already strong plastic roof. I could see not having this as a problem if we expected our shed to be covered in snow or out in "the wild" instead of just sitting under our rooftop eave against the side of the house. After construction, we didn't really notice any stability problems so we decided it wasn't worth sending it back or asking for a replacement part.Anyway, this is a very solidly built and easy to assemble plastic shed. Everything snapped together very easily and you could tell that the Rubbermaid brand put the extra effort into making it all fit together without any goofy extra bits of plastic you needed to cut away, or the tongue-in-groove stuff didn't fit properly.My biggest complaint was the method for securing the roof to the walls with screws. The roof overhands the walls, and it leaves a gap that you're supposed to used the screws to attach the roof to the walls. The problem is, the included screws have a head that's about .2 inches bigger than the gap provided. So you need to lift up the roof a little bit to give enough space to insert the screw heads, which often throws off the whole plastic slot-in-slot arrangement of the structure. Literally, this would be no big deal if the heads of the screws were just a tiny bit smaller. Instead, you have to like use some sort of glue or putty to attach the screws to your screwdriver otherwise they'll fall out as you try to navigate them into the gap to attach the screws.This little part was by far the hardest part of assembling the shed. Added at least 30 minutes to the overall hour long construction simply because we couldn't figure out a way to get the screws into the wall/roof without them falling out. Also, pilot holes with a drill are your friend, use them for everything and drill straight through the plastic.Once it was assembled it was fine. The doors originally looked all janky and not lined up, but by the time we put the shed in place, levelled it out, and attached the door equipment it was all lined up and looked great. The shed is NOT entirely waterproof, you can still see daylight between some of the joints, but if you elevate it over the ground and make sure it's all securely fastened it'll be fine. I wouldn't store precious linens in it outside without a tarp. We're using it to store closed plastic bins that offer their own sealed protection in case the shed leaks and we're fine with it.Only complaints are that it should be probably $50 cheaper considering it's really just 8 pieces of plastic. But it went together quickly, and looks like it'll be a fine shed for some minor storage in our environment.

**2 Year Update 5/20/2022**: Still going strong! The shed still looks just like it did when we set it up. The addition of the L-brackets and sliding bolt lock in my original review appear to have prevented any warping that other reviewers complained about. The shed hasn't discolored or faded at all (it gets full sun from sunrise til about 1pm) and has never leaked water. The cushions inside still look new and have been well protected from the elements in between use. Now I'm considering a second Rubbermaid shed to hold our grilling and extra gardening supplies!We needed a cross between a very large deck box and a small shed to store our outdoor cushions in during rain or off-season. We have a *very large* concrete seat wall that uses an enormous amount of outdoor cushions - way more than a typical patio set. I read reviews both here on Amazon, and on several big box store websites, for different lean-tos, XL deck boxes, sheds, etc. Most have relatively high reviews, but it seems like all are plagued with complaints about durability or warping, or poor assembly instructions. In the end, we ordered this 5 x 2 Sandalwood Rubbermaid Shed because it fit the dimensions we needed. I read several previous reviewers comments about the roof warping and effecting the closure of doors, and we have mediated those concerns by both installing some small L-brackets to the front of the shed (not the doors but the small bit before the door hinge) and the roof, and we have also purchased a sliding bolt lock that a previous reviewer posted a photo of (ours not installed yet). I am hoping these two amendments will prevent the roof from warping and keep the shed in top condition.We installed on a level crushed granite surface, on store-bought pavers. Install was quick and easy with two people - maybe 1.5 hrs tops, with the second person only helping stabilize a couple times. In my photo, you'll see the shed easily fits 8 seat cushions (48 in L x 18 in D x 3 in H), 16 back cushions (20 in square) and 4 lumber cushions. We are actually getting a 9th seat cushion and believe that will fit also. We put a few pieces of wood at the bottom to keep the cushions off the ground, just in case of a high water (although this shouldn't be necessary since its already raised on pavers). We didn't see a lot of light inside when we stood in it closed, assembled, so we did not add any silicone to seal it. Our shed is housed somewhat by the roof overhang, but not completely.I will update the review for durability after a full Summer season of cushion storage.

After the assembly the shed seems to be somewhat shaky and not very stable.

Easy to setup. What I expected. No sure about durability.