Your cart is empty.
Your cart is empty.Increase Ground Clearance for on and off-road obstacles Maintains smooth factory-like ride Levels the front with the rear of the vehicle
C. R. Lee
Reviewed in the United States on January 20, 2025
Lifted and leveled out front end of jeep. There were no instructions in the box on how to install the spacer, but figured it out. They should have included some instructions, otherwise it's good to go.
joe
Reviewed in Canada on January 17, 2025
Easy to install. Good material. Gave my jeep the little lift in the front I was looking for.
Bill T.
Reviewed in Canada on July 22, 2024
well made
Voltronijago
Reviewed in the United States on July 16, 2024
i have had great luck with these spacers. they leveled out the front of my jeep nicely.
Forrest
Reviewed in the United States on November 15, 2024
Used to level out my front end after lift
Chad Grenier
Reviewed in Canada on October 20, 2024
Easy install. They do what they say the product will do.
It really works
Reviewed in the United States on April 7, 2024
Easy install and perfect fit for all jk jt jl
jacob
Reviewed in Canada on August 3, 2023
Perfect fit
Gregthefisherman
Reviewed in the United States on August 24, 2023
07 JK-removed sway bar brackets(instead of links because the bolts are easier to deal with), removed lower shock bolts, removed drive shaft bolts(marked and installed exactly where it came from), had the track bar off because I was replacing it due to worn bushings, and the diff dropped down with plenty of room to install spacers. Original spacer must be removed from body and this spacer installed between it and strut. A little grease as it fits tight in the center helps. I have a stock height X 2 door and this put it about perfect.
Juan I.
Reviewed in Mexico on March 8, 2023
Originales, instalacion facil si le mueves a la mecanica, hay que combinar con amortiguadores mas largos, en mi caso compre los rough country de 0.5 a 2.5in mas largos y quedo excelente la conduccion de mi jeep.
Olan
Reviewed in the United States on May 8, 2021
After rxing these I noticed while inspecting the part it wasn’t as described in the picture or installation instructions. The part rx’d did not have the lip as shown or described. I contacted Rough Country and sent them the pictures. He said it wasn’t the correct part. After rxing a replacement, I found it too was not the part as described in the picture or installation instructions. I made several attempts to determine if the part had been revised, etc. to no avail. At this time I made the decision to return them all together. Soon after I discovered the part had been revised and was correct. Since I’d already returned them and needed it quickly I purchased it from a local shop. The installation requires a good low profile jack and jack stands, but overall is pretty easy. It makes a big difference in the rake and levels my Jeep. The return process with Amazon was excellent as always and knowing what I know now would recommend this product if you are needing to level your Jeep.
Fap_Damage
Reviewed in the United States on March 8, 2021
I bought these for my wife's 2017 JK Sahara. She wants to put 35's on it while keeping the factory geometry, ride quality, and low center of gravity. This did the trick!! We will still need high clearance fenders & bumpers, and possibly bump stop extensions. We also added wheel spacers to keep the factory wheels. The look these two items gave the jeep is pretty impressive considering just how small the changes were. We were originally going to go with 1/2" spacers, but I'm glad we went with the 3/4". This height is great and still allows for some droop with a winch installed.These leveled out the factory rake perfectly. It doesn't raise the Jeep up enough to need a track bar relocation or to adjust the steering. It's subtle, but noticeable. They are easy to install, even with only with a floor jack and jack stands. I had them installed in about an hour and a half. I would recommend getting the front of the jeep as high as possible to help get the springs out. If you're going to be adding bump stop extensions I would do it in combination with this install. It's inconvenient to have to take the springs back out just to add them. Hopefully I won't need to add them.Overall, great product!!
Dan in NM
Reviewed in the United States on March 22, 2013
Product was delivered on time and fit the Jeep as expected. It lifted the front 3/4" as stated, but I wish there was a 1" lift and level option, becasue even with my stock front bumper (no winch or heavier custom bumper) the Jeep is still just barely nose down. I'll post a picture of my white Jeep, so check the pictures and judge for yourself.Also, it was fairly easy to install with a few wrenches, a couple of jack stands and a floor jack. You can check You-Tube for some video instructions.
Recommended Products
