Your cart is empty.
Your cart is empty.Indiana Farmer
Reviewed in the United States on February 7, 2025
Fantastic product. Works really well. Allows you to get a tight fit on the riv nut. Easy to use. Highly recommend.
car guy
Reviewed in the United States on February 20, 2025
I have been using a pistol grip style rivet nut tool for years. They do not always get the nut tight enough and the nut spins. This tool is amazing. Every nut is perfect each time. The day that I unboxed it I installed front and rear fenders on a Jeep. The tool worked flawlessly for each nut installed. Everyone needs this tool in there tool box!
Schuller
Reviewed in the United States on February 1, 2025
So far I have only used it to put 6 nuts into an aluminum frame for a carport,and I wish I had ordered this long ago. I close my carport in with clear vinyl walls every winter to block the wind and keep snow off the outdoor furniture. I always use rope and bungee cords to fasten them in place. I added the nuts in order to use bolts and with washers that fit snuggly through the grommets in the vinyl. I thought it was going to be a little to use judging by some of the reviews, however that was not the case. I highly recommend getting one of you are thinking about it.
Kevin M.
Reviewed in the United States on January 12, 2025
Just finished installing 8 large rivnuts with this. Do a practice one first so you understand how it works. Stout, well made tool. Yes, you do need a IQ over room temperature to operate this. Instructions are fine. Glad I bought this one. I don't have much clearance where I was installing the rivnuts so the bolt cutter style would not work. Nice storage box and has all the basic mandrels you need. Comes with 10 rivnuts for each of the mandrels sizes in the box.
Frank Sims
Reviewed in the United States on August 29, 2024
At first glance it does not seem too easy but once you figure it out I think it may be better that the other option. I used this to fix an existing screw rivet and it worked like a charm. I guess the price is good. It includes several different size rivets and several sizes of drivers. Good bye.
Inverclyde
Reviewed in the United Kingdom on August 17, 2024
A good copy of the Würth product that I first used.Have used it so far for the larger (M10, M12) inserts with no issue. Good value for money.I would ‘up’ the price a little and include a good set of drill bits to suit the inserts.This is going to be well used as I work in fabrication
Edwin s.
Reviewed in Mexico on June 13, 2024
No la he usado pero se ve que está de muy buena calidad. Me gustó
David
Reviewed in Australia on May 19, 2024
accurate description
H.Jackson
Reviewed in the United States on March 16, 2024
I like others bought this with reserves about the quality, but was very surprised about how well made it is. I used it on the fenders of my grandson's ATV. I installed 12 1/4"x20 rivnuts and they all turned out great. I did try a couple on a piece of scrap first to get the feel of it. After a slight learning curve it is very easy to use. I have 2 bad shoulders that need replacements, but I can work this tool ok. I did fine that the directions are misleading and wrong, just about releasing the tool from the rivnut. After pressing the rocker switch down , then turn the FRONT lever one turn COUNTER clockwise to loosen the threaded mandrel. The only downside that I see is the gauge is a bit hard to read, but after a few uses you get the feel of how much pressure is needed. The case is even well made and holds extra rivnuts. This is one of the best purchases that I have gotten from Amazon.
S. carthy
Reviewed in the United Kingdom on December 19, 2024
This was a bargain when I purchased vs other makes. I purchased it to do some work on a VOLVO and from what I can see it's the same tool but several hundred pounds cheaper. Ideal for DIY, not sure about other use as I can't comment.
Robert P
Reviewed in the United States on November 21, 2024
In my opinion, This works better than the wishbone type rivnut tool, it gets into tighter areas and is a more compact ratchet type tool. Not big and bulky. It is a bit of a learning curve to set up the first time but well worth it. Great value for this as it comes with all the collets and tons of rivnuts inserts both sae and mm sizes all the way up to m12 for bumpers etc. you can always get extra inserts and use stainless steel inserts purchased separately. What makes this great is that Everything comes in a nice compact size box that fits in your tool box as opposed to those other huge wishbone units most have to hang on a wall or takes up too much room in your tool box drawer. It is well built and not one of those elcheapo kind of tools.
Cliente de
Reviewed in Mexico on November 18, 2024
Aunque es bastante cara vale la pena invertir en esta herramienta, compré la más económica y no duró ni dos remaches, en cambio está lo hace de madera fácil y rápida
DavTech
Reviewed in the United States on October 2, 2024
This is more about the style of tool, than the manufacturing. The ratchet type is a little cumbersome but it has its purpose - when you need to get into a tight spot. However, it is tedious, and takes a while to set up and pop in position. I prefer the squeeze types.As for the quality - it is good, not the highest, but pretty solid. should last for a long time.
Recommended Products