Your cart is empty.
Your cart is empty.Cover pieghevole: Protegge da polvere e sporco
Mauro
Reviewed in Italy on March 1, 2025
Articolo di ottima fattura. Plastica trasparente e brillante, con una bella tonalità di blu nella sezione. Perfetto per il mio giradischi Img Stage Line DJP-202. Le cerniere sufficientemente forti da tenere sollevato il coperchio.
Maria
Reviewed in Germany on February 6, 2025
Die Haube passt perfekt auf meinen Technics SL 1300. Auch die Scharniere könnten, nach dem neue Löcher gebohrt werden genutzt werden. Da der Dreher bei mir im Regal steht und der Platz nach oben nicht ausreicht um die Haube offen stehen zu lassen, wird er nur ohne Scharniere aufgelegt. Passt und sieht gut aus.
Sture Lindberg
Reviewed in Sweden on January 31, 2025
Bought it for a Lenco L75. Perfect fit. Looks great.Only slightly difficult to get the hinges fitted right - they don't co-operate very well.Totally happy and will buy another for my other L75.
Lorenzo
Reviewed in Mexico on January 2, 2025
Muy bonita cubierta para tornamesas Reloop, además de cubrir del polvo, le da una magnífica vista al aparato. Las bisagras funcionan bien y pueden mantener la cubierta abierta sin problema.
GuzelStride
Reviewed in the United States on August 10, 2024
In response to the reviewer who claims this is a perfect fit for Technics SL-1300: while this dust cover can go on an SL-1300 without any modifications, the rear side of the dust cover will sit a little too high. This leads to a slight opening in the back where dust can get in. The dust cover is not centered when using the stock screw holes, BUT you can technically install it.I opted to drill new holes into my precious Technics turntable. I took my time to ensure the screws would line up and no damage was done to internal components. It was not too difficult. With the new holes, this dust cover is now a perfect fit with no openings for dust to enter.I realize this dust cover is not made for Technics turntables, but these go for half the price of an OEM cover so I figured it was worth a shot. It's a beautiful dust cover. The corners have a purple-ish tint to them (my favorite color). I imagine this is a great addition to the Reloop turntables these covers are intended for.
Jeyson
Reviewed in the United States on May 31, 2024
This fits perfectly on the top as a dust cover for my Pioneer PL-510A turntable. The hinges do not line up, although I can probably make some modifications to the unit to make it work. Looks really nice, and does the job, for a great price!
T. Harward
Reviewed in the United States on May 29, 2024
I have a Pioneer PL-516 and it came from the auction site in “working” shape but with cracked dust cover. Also many other things broken but luckily this is not my first rodeo, I got it running like it’s 1978.Replacement dust covers made for this deck go for $150+ and are often shipped from the EU, but some comment here made me think this might be worth a shot.It was worth a shot. It’s just about a perfect fit. As long as you don’t mind drilling new holes and the plastic hinges, it works great and looks fantastic. Size is within 1/8” all the way around, and rubber feet land softly.If you have one of these fantastic turntables then it probably needs a new cover by now, and this is a great option if you don’t want to spent more than the deck is worth.
JParker
Reviewed in the United States on March 26, 2024
As the title says, this fit my SL-1600 perfectly! IMPORTANT NOTE: The hinges also line up perfectly on the Sl-1600. Score! I was also pleasantly surprised to see the hinges included with the dustcover.This dustcover is heavy, thick and robust, just like the original dustcovers from the 70s. Mine arrived in pristine condition, no flaws!One thing I’m not crazy about is that the plastic has a slightly bluish tint instead of being completely clear. It isn’t ‘smoke’ or grey, just kinda…bluish.Anyway, I’m totally pleased with this dustcover!
Kno Whi
Reviewed in the United States on February 13, 2024
Fits new 1200’s perfect fit!! Good quality too!!I wanted the original techniques covers, but somebody stole them and they cost a lot. The best possible solution for your 1200s.
Greg Traut
Reviewed in the United States on November 28, 2024
Could not be more happier with this item it starts with shipping was packed extremely well. Arrived two days early from scheduled date. It fits like a glove hinges are terrific. I cannot say enough good about this item. Very very pleased.
Andrés
Reviewed in Spain on April 6, 2024
Perfecto para un plato Stanton STR8 60, acoplamiento como si fuese original.Contando que van las visagras el precio está bien.
Andrew L Sveikauskas
Reviewed in the United States on April 8, 2023
This shows up in searches for a replacement for Technics gear. I trusted that, but it turned out the hinges are not a match. It seems many people decide to drill new holes. But no fear! I was able to model a 3-d printed hinge and it now fits. It seems like many others decided to do that too, if you search the usual places for STL files there are abundant ones online.
Albert Flasher
Reviewed in the United States on August 23, 2020
The Reloop dust cover is a very nice dust cover that, very fortunately, fits the Technics SL1200-MKII turntables nicely. But, this is not without it's headaches. There are a coupe reviews that show how they installed this on their SL1200-MKIIs but they don't say how they did it, so I will tell you the easiest way I found to install it....go slow and lay out everything right, before drilling any holes! This actually took me a 3-4 hours to complete, because I tried a couple of other methodsYou will need the following: #8 x 3/4" self drilling hex head screws, a center punch and a small hammer, a drill/driver (I used a 20V B&D drill/driver), an 1/8" drill bit, a 3/16" drill bit and a 1/4" socket driver bit. A small vacuum cleaner to clean up the drill shavings is handy, as well. I vacuumed the metal shavings up after drilling each hole.1. Clamp your tonearm in place and remove your head shell.2. Turn the turntable around so the hinge plates are facing you.3. Set the dust cover on the turntable, I set the back of the cover on a penny, placed in each back corner, to raise it up just a bit. Then set one of the hinges in place in the cover, now set the hinge bottom over it (be careful they like to spring open), using a mechanical pencil poke it through the holes and mark the top two holes. I used a flashlight to be able to see my little round marks left by my pencil. Try to do this on both sides. Check your layout to be sure the holes of the new hinges are still lined up before drilling. Make sure you are even left to right - the back of the cover will be where it will be. When complete I have a gap of the thickness of a business card around the front sides and back. The rubber bumper on the start button side sits right at the edge of the opening for the button. The front edge of the cover barely clears the platter, control buttons and the stylus light.4. Center punch the pencil marks to keep the drill bit from wandering, then drill 1/8" holes, through the front and continue through the back of the hinge plate. Stop drilling when you get through the back of the hinge plate!5. Next using the 1/4" driver socket, run in the self tapping screws, do not run them in tight! Next back them out and remove them.6. Using the 3/16" drill bit, drill through the top holes of the hinge bases, so your #8 screws pass through. now you are ready to attach the hinge base. Do not tighten any screws until you have two for each side done, to help align things if need be. Be sure to set your drill/driver on the lowest torque setting, so you do not break the hinge base or maybe install the screws using a 1/4" ratchet or nut driver - do not over tighten!7. Install the cover, clean up the mess and you're done!8. Crank some tunes and enjoy!
Recommended Products
$349.99
$ 99 .00 $99.00
$249.00
$ 99 .00 $99.00
$599.99
$ 99 .00 $99.00