Your cart is empty.
Your cart is empty.Extang MaxSeal is designed to help keep dust, rain, and snow out of your truck bed. Made with all-weather grade, UV, gas, and oil resistant EPDM industrial high-strength rubber, MaxSeal offers the same reliable protection and OE doorjamb seals. Add more protection or replace old or damaged tailgait seals. Do it yourself with ease! Simply cut, peel, and stick around the edges of your bed. Each MaxSeal package comes with 10 feet of seal.
iphone
Reviewed in Canada on November 17, 2024
Garbage
Clint G
Reviewed in the United States on September 1, 2023
Easy to install, clean things well.Measure 2x cut 1x.In general follow directions but I modified from there a little for my toyota tundra.This is a nice seal kit and will last a long time
Some Guy
Reviewed in Canada on March 6, 2023
Good adhesion, made to fit with just the right amount of material. Keeps the dust out of the truck box.
Joe G
Reviewed in Canada on July 25, 2020
This is a great quality tailgate seal. I had to customize it to properly fit my Ram 1500 but it worked great once I installed it.
Gizmokid2005
Reviewed in the United States on July 21, 2020
If you have a 5th gen Ranger (2019+) this isn't a great solution to seal the tailgate. The space at the bottom is too large for this to work well. The install was pretty simple, the seal is easy to manipulate and contour.I give the product 5 stars overall, but only 4 stars, as for my use in a 2019 Ranger this didn't function as a "universal fit" that worked.
Reuben Wolsey
Reviewed in the United States on June 30, 2020
Great product. I have a 2007 toyota tundra. This mostly solved the gap problem along the tailgate, but due to a really odd design even this fat gasket can’t plug the air leak near the top of the gate on each side. Great product.
Carl Smith
Reviewed in the United States on August 23, 2019
I installed this on the box/tailgate of my 2018 Silverado. The only thing I didn't like was due the design of the box you had to piece it together. You also have to put a small piece on the tail gate to get a good seal. I would say it probably cut down about 98% of the dust that accumulated in the box. I'm sure it will do the same for snow. Just follow the directions for the newer chevy pickups and you should be fine.
GC
Reviewed in Canada on August 18, 2018
Easy to install but my ram Tailgate seem to have been able to peel it off already just from opening and closing it. It might be where I installed it but a bit surprised by the weak glue.
WirelessMike
Reviewed in the United States on August 5, 2016
I only just installed today with guidance from Extruded Solutions [...] specifically for my 2016 GMC Sierra All Terrain. I have factory spray-in bedliner, but it didn't make it any harder to install where I needed it. Per the guidance I mentioned, I was able to see the same good, water-tight seal from inside the bed that appears in the pictures. We only had a light rain today a few hours after I installed, and there was absolutely no moisture in the bed, but it was just a light rain. I'll update this later once I've had a good downpour to drive through, but so far, so good.My only complaint is that with the small pieces I needed to cut make a good seal and the couple replacement pieces after tearing 2 of those smaller pieces up a little trying to pull the off to realign, I ended up with too short a strip to install along the bottom. I may not need it, but if I do, at a little less than $20, I don't mind buying a little more later to complete the job. I'll know soon enough if I really need it.
Customer
Reviewed in the United States on July 29, 2015
I am only giving this product three stars as it has performed questionably for me. This product is really on the verge of a do it yourself product. It is a roll of peel and stick door gasket that I could have probably procured cheaper at an automotive supply web site in bulk. It rely's on the customer to cut the product to length and then apply at the appropriate height in relation to the bed floor. All of that aside, the problem that I am running into is that in the summer heat, triple digits, the product will stick to the tailgate better than the peel and stick adheres to the bed causing me to have to reapply the product every time I open the tailgate. The reason that I am giving it the three stars that I did is that the product does cut down on the amount of fine dust getting onto the bed of the truck by about half of what I was experiencing without it.
Rick in CT
Reviewed in the United States on May 22, 2015
I bought this for my 2014 Dodge Ram 1500. I was mostly worried about if it would stick since I already have a line-x sprayed on bed liner. I also wanted a good product as far as functionality. I made sure I washed the area well with car soap then sprayed some brake cleaner on a clean rag and wiped the area where the adhesive backing was going to be placed. It's been a few weeks and everything looks very good. Also, once you figure out which way the seal goes and where and how to position it, it's a fairly easy job. To help me figure it out I cut a 1inch piece of material and placed it around the diffrent parts of the bed to see how it would fit before commiting to a full install. Every manufacture's design is different, just take your time. I had to cut pieces to fit before and after the factory rubber stops on my truck,
fisher
Reviewed in the United States on March 21, 2015
Got this to seal around the tailgate of my 2010 Tundra with ARE casmper shell. Was able to seal arpund the bottom and lower 3/4 of the sides very easily, using the bulb seal on the edge next to the inner side of the bed. The upper 1/4 of the sides with the latch and taillights was more difficult, but by using the outer edge of the bed with the bulb against the outer edge of the tailgate, I was able to seal the upper 1/4 and across the top. I used a small cross piece just above the latch to seal off the channel formed by changing the seal edge. Where the seals overlapped, I notched the upper one so the seals lay flat and used contact cement to help hold the seals in position (including some in the tube hole to keep the tube ends from catching on the tailgate when closing). There was just enough material (about 1 inch left over). But it is all sealed well now. Time will tell how well the seals hold. I'll do a follow-up after a winter season.
Paul A.L.
Reviewed in Canada on October 18, 2015
Easy to install and seals the bottom of a 2015 F150 very well. The sides are good up to about the 1/2 way point where the gap in-between the gate and the box becomes very wide and the Seal is not wide enough. Because of the extra Seal provided, I was able to double up in some areas and this helped. Compared to not using the Seal, hardly any water from a high pressure car wash enter's the box area which is topped with a cap. I would use again.
Recommended Products
