Your cart is empty.
Your cart is empty. Specification:
Material: Aluminum alloy
Color: Black
Front Bumper length: About 180mm/7.09inch
Rear Bumper length: About 195mm/7.68inch
Suitable Models: For SCX10 90046 for TRX4 Axial for SCX10 iii AX103007 1/10 RC Crawler
Package includes:
1pc x Front Bumper
1pc x Rear Bumper
Mw
Reviewed in the United States on February 9, 2025
Good buy, realistic looking front and rear bumpers. Really adds to the look of your 1/10 scale crawler. I recommend
Tim Graham
Reviewed in the United States on September 20, 2024
These are sweet bumpers for my FMS FCX10 K5 Blazer. However, one of the lens' were cracked, and two of the LEDs aren't working. One on the front and one on the rear.
Randy
Reviewed in Canada on April 22, 2024
the bumpers are a fine product, But the front Led's were and are no good two I had to re solder as the connection was not connected to the bulb and the other two just don't work. Just so you know the rear tail lights are white.
Tim sharp
Reviewed in the United States on September 13, 2023
I spent a long time looking for a set of bumpers for my trx-4 sport high trail, like way too long of a time. I wanted something that looked and fit good and nothing else was that close. As far as these bumpers go I am pretty happy.They don't necessarily look cheap but I can see some major fail points; mainly how the studs mount the bumper to the frame. The posts are secured to the bumpers by a single screw each. The stock plastic ones had inset points and screws making the connection far more able to take a beating without breaking. With that in mind, this truck is for scale look and rough trailing. Can it make it over that root ball and rock ledge? Yes! Am I going to launch it over said ledge at full throttle? No! The durability of these bumpers does seem suspect so I wouldn't use them if you're the kind who likes to bash their crawlers through the course. I know there are those out there but I have no desire to send hundreds of dollars hurtling down a rock wall and wonder to myself, hhmmm it's probably because I bought that bumper, that's why I'm replacing things all the time....I am really impressed with the lights so far and I will update if I do have problems but between what I already had installed and the new lights, it lit up my entire garage. These put some really good light down the trail. Wiring was not difficult and if you have any mods done to your rig already you should have no problem getting these mounted and wired right up.One other reviewer on this claimed that it didn't mount to the trx-4 without some adapter but failed to say what it took for him to mount it much less post any photos of his final rig. I'm not sure what he went through but I checked both my 2021 bronco and my sport and I found no fitment issues.I do not have a winch yet and probably won't for a long while so I don't know about that fitment yet.I do recommend these bumpers if you already plan on avoiding launching your rig off of cliffs.
Jake Buckley
Reviewed in the United States on July 9, 2023
Can't beat the price for the set tbh, especially considering the front bumper also accommodates a winch and the back bumper has a mount for a spare tire (which I personally plan to add later). My kit didn't come with any instructions at all (hopefully yours will) but looking at the photos I was able to figure it out. Took a little bit of trial and error to get everything right so have some patience. Also if you're planning on installing the WARN 9.5CTI-S winch like mine you will need to do a little drilling as the holes don't line up perfect. It wasn't hard as the bumpers are aluminum but still something to consider. Overall pleased with how it all came out, though, LEDs are bright!
Tomcat Gaming
Reviewed in the United States on November 11, 2023
great fit even though its for a jeep all i did was remove spare tire rack to fit the truck and it looks like a real truck on fitment
Customer
Reviewed in the United States on January 30, 2023
Relatively easy to assemble and attach to truck. metal shackles included. when changing to metal bumpers, you might want to change to metal bumper MOUNTS, the plastic bumpers have a little flex and can absorb a little impact, the metal bumper transfers impacts to the bumper mount. if it isn't strong enough, they break the mount-yes i did, not really a bad thing, just a 'be aware' thing. Does not detract from the bumpers' review, rating, or value!! These are great!
Douglas Wittenborn
Reviewed in the United States on September 11, 2022
Bumpers are great qualityand shipped gast. Lights are cheap. And seller needs to ammend the post...Bumpers WILL NOT fit the trx 4 without adding a bumper adapter to accept the narrow round mounts. Mount adapter foe the sxt 10 will work.Winch holes DO NOT work with the Traxxis winch OR standard fairlead. Had to re-drill holes for the winch and fairlead. VALUE for the money is there, buy this is not a direct fit for any TRX4.I made them work and will post pics.
Michel
Reviewed in Canada on February 20, 2022
alex duncan
Reviewed in the United States on May 16, 2021
The product fits nice the only flaw that I found is that the front bumper brackets to mount to the RC don't have holes close enough to where it looks right on my axial SCX10 3 also it did not come with instructions on how to install anything and I had to install and wire the lights the mounting brackets as well as the tow hooks and figure out on my own which screws went to what other than that great product, love the item.
RandomAndrew
Reviewed in Canada on October 30, 2021
Bought specifically for the front bumper, looks savage on my Gladiator and yes the rear bumper can be reduced to just the bumper.
Recommended Products
