Shopping Cart

Your cart is empty.

Your cart is empty.

Raised Panel Cabinet Door Making Router Bits,1/2' Shank Ogee Molding, Cutting Dia. 2-1/2',Door & Window Router Bit,for Paneling Trimming, Routing

4.4 (8) Write Review
Free shipping on orders over $29.99

$12.99

$ 5 .99 $5.99

In Stock

About this item

  • 🔨Akylin Raised Panel Bit 1/2" Shank,Ogee Molding, Cutting Dia. 2-1/2", Cutting Height 1/2". Application: Routing panels for doors and many other decorative tasks
  • 🔨Ideal for creating raised panels for doors, drawer fronts and paneling, as well as decorative tops, plaques and molding
  • 🔨Routs hardwood, softwood or composite panels. Use 1/4" cutting height for 3/8" thick panels
  • 🔨Very high grade tungsten carbide-YG6X virgin original carbide tipped,with minimal wear and up to 2X longer life
  • 🔨Use only in table-mounted routers. MAX RPM 12000


Product Description

Akylin Extra Long Flush Trim Router Bits
2
3

flush trim

Professional look

Direct from factory, ECONOMICAL but remain in great quality.

Cutter body sprayed with plastic, improves surface hardness and reduces surface wear.

Perfect for DIYERS.

flush trim

Ball bearing guided

Bearing guide ensures perfect guidance and added stability,for creating raised panels for doors, drawer fronts and paneling, as well as decorative tops, plaques and molding

flush trim bits

Tungsten carbide tips

2 flutes,YG6X carbide tipped,pretty sharp for cutting left no scars,skips or tear out and reducing debris and burrs.

Silver induction brazing for maximum strength and durability.

flush trim bits

Hardened steel body

Solid hardened steel body with Anti-Kickback,sharp and precision grinding for proper balance at high RPM,run true without vibration.

NOTE:

1.A little rust preventive oil deposits on the sandblasted surface (looks a little dirty),is normal and doesn't affect the usage. Absolutely guaranteed to be a good quality new bits!

2.Insert the cutter shanks into the collets as deep as possible,leave 3mm or less shank showing.

3.Before the product is received for using, check the drill bit for cracks or chips,we provide perfect after-sales service.

4.Trial cuts should be made on waste material before starting any project.

SAFETY INSTRUCTIONS:

1.Always wear dust protection mask,eye protection in the form of goggles, safety spectacles or a visor.

2.Make sure use on a router machine for which the product is applicable.

3.Please make sure that the Router Bits and router table connections is tight and avoid loosening and causing it to throw out !

4.Before each use check the cutting tool is sharp and free from damage.


Steve Wilson
Reviewed in the United States on March 3, 2025
Haven’t a chance to use these bits yet. They appear to be well made, per the description and arrived on time.
Josh
Reviewed in the United States on March 8, 2024
These are nice and stout and the edges are very clean and sharp. They each come packed in a difficult-to-open plastic case, but mine fit perfectly together at the cutting edges and are oiled nicely to keep them in great shape. They are well balanced and bite well when on the table.
mark
Reviewed in the United States on March 19, 2024
I'm not a typically high rater. To get five stars, you have to do something to knock my socks off. 4 stars means GOOD.Got this because I didn't have this size bit yet. It measured right at 2" diameter and 3/4" cove. For this size bit, I like the bigger shank size. Unlike some of the other bits I have, they don't have a protective paint coating on the non-cutting portion; not that I think the painted ones are by any means better. It produced a clean first cut; I'll have to see how long it lasts. It looks to be quality metal but time will tell. It looks to be a GOOD router bit.
G. Blackburn
Reviewed in the United States on March 18, 2024
I was pleasantly surprised at how cleanly this cuts. I am used to getting poor-quality cuts from inexpensive bits. This bit cuts very cleanly and leaves a nice finish.
J. Overton
Reviewed in the United States on February 16, 2024
I've never used this type of router bit before and it took a little setup but once I got it dialed in, it was smooth sailing. I was able to make up some cabinet door panels with very solid joints. Great value way for me to try out this style of joint.
Strings.2012
Reviewed in the United States on January 17, 2024
These rail and stile bits are great quality for the cost! The bearings are very smooth, the shank is machined very well and is smooth for the 1/2" collet router. The profiles matched up very well and the carbide seems to be in great condition; sharpened perfectly from the factory and oiled up well. The containers these came in were the biggest struggle; the notched edges and flexible plastic casing made it difficult to get them apart. That with the oversized bit inside that barely doesn't fit, these bits were wedged in really tightly also pushing on the outsides which made the teeth catch and took some fenagling to get apart. Overall though these seem like great bits for the cost, and once the snow clears up I can't wait to get them on the router table and build some panel doors. I will update once I have successfully tested. Other reviews have seemed promising though for the DIY/home crafter woodshop.
Grambo
Reviewed in the United States on January 14, 2024
This bit is for finishing cabinet doors primarily. It has a 1/2" shank. The cut diameter is w 3/4". The bit makes Ogee molding cuts. It sure is one heavy duty bit! It has a tungsten carbide cutting edge, a good thing.Be aware that this bit has too large a shank for the average homeowner with a 1/4" or 3/8" router.This bit is for pros, furniture factories and cabinet shops. For them, yes - this is an excellent bit, and it will make well formed, clean cuts for a long time.For the average Joe? Not for you.
Michael Mooney
Reviewed in the United States on April 15, 2024
Good for light use